Aerospace Composites Market worth $53.4 billion by 2030 - Exclusive Report by MarketsandMarkets™

DELRAY BEACH, Fla., July 30, 2025 /PRNewswire/ -- The report "Aerospace Composites Market by Fiber Type (Glass Fiber, Carbon Fiber, Ceramic Fiber), Matrix Type (Polymer Matrix Composite, Metal Matrix Composite, Ceramic Matrix Composite), Manufacturing Process, Aircraft Type, Applications & Region - Forecast to 2030", aerospace composites market is estimated at USD 30.3 billion in 2025 and is projected to reach USD 53.4 billion by 2030, at a CAGR of 12.0% from 2025 to 2030.

Browse in-depth TOC on "Aerospace Composites Market"

150 – Tables
80 – Figures
320 – Pages

Download PDF Brochure: https://www.marketsandmarkets.com/pdfdownloadNew.asp?id=246663558

The growth of the aerospace composites market is driven by several key factors, including the need for improved fuel efficiency through weight reduction, enhanced performance enabled by high strength-to-weight ratios, and lower maintenance requirements due to superior resistance to environmental degradation. Regulatory mandates aimed at reducing emissions, coupled with ongoing advancements in material science and manufacturing technologies, are accelerating the adoption of composites in aerospace. Their design flexibility allows for the creation of more aerodynamically efficient aircraft structures, aligning with the increasing global demand for air travel and rising military needs. Moreover, the industry's growing emphasis on sustainability is encouraging the use of composites that not only deliver high performance but also minimize environmental impact across their lifecycle.

The glass fiber segment is projected to register the third-highest CAGR in the aerospace composites market during the forecast period.

The aerospace composites market is segmented based on the fiber types into glass fiber, carbon fiber, ceramic fiber, and other fibers. Glass fiber composites hold a significant share in the aerospace composites market due to their lightweight nature, cost-effectiveness, and favorable mechanical properties. Widely used in commercial and military aircraft, rotorcraft, and interior components, they offer a high stiffness-to-density ratio and good durability, making them a viable alternative to more expensive carbon fiber. Their ability to reduce weight without compromising strength supports fuel efficiency and sustainability goals. Ongoing advancements in manufacturing and material compatibility are further enhancing their performance, driving increased adoption across a range of aerospace applications.

The ceramic matrix segment is projected to be the fastest-growing segment in the global aerospace composites market, in terms of value.

The ceramic matrix composites segment is projected to register the highest CAGR in terms of value during the forecast period. This is driven by increasing demand for high-performance lightweight materials in advanced aerospace applications. Known for their exceptional heat resistance, strength, and durability, CMCs are ideal for use in turbine engines and high-stress components. Ongoing advancements in manufacturing technologies and the push for more fuel-efficient, environmentally compliant aircraft are further accelerating their adoption across both commercial and military aerospace sectors.

Request Sample Pages: https://www.marketsandmarkets.com/requestsampleNew.asp?id=246663558

The resin transfer molding (RTM) process is projected to hold the second-largest share of the aerospace composites market during the forecast period.

The resin transfer molding (RTM) process is expected to hold the second-largest share of the global aerospace composites market during the forecast period. RTM is increasingly favored in aerospace manufacturing due to its ability to produce complex, high-performance components with precision and consistency. The process involves injecting resin into a closed mold containing dry fiber preforms, allowing for excellent control over fiber placement, resin content, and part geometry. This results in components that are lightweight, structurally robust, and have high-quality surface finishes on both sides. RTM also offers improved production efficiency, reduced material waste, and compatibility with automation, making it ideal for both small-batch and high-volume production. As the aerospace industry continues to prioritize advanced manufacturing techniques that meet rising performance, safety, and sustainability standards, RTM is expected to see widespread adoption in the fabrication of fuselage sections, wing components, fairings, and interior parts.

The military aircraft segment is projected to be the third-fastest-growing aircraft type in the global aerospace composites market.

The use of aerospace composites in the military aircraft segment has gained significant traction, driven by the need for lighter, more durable, and high-performing aircraft capable of operating under extreme conditions. Materials such as carbon fiber and ceramic matrix composites offer key advantages, including weight reduction for improved fuel efficiency and extended range, enhanced strength, and superior heat resistance crucial for modern high-speed and combat aircraft. Additionally, their ability to reduce radar cross-sections supports advanced stealth capabilities. Technological advancements in manufacturing processes, including automated lay-up and resin transfer molding, are further accelerating composite adoption. With global defense forces focused on modernizing and expanding their fleets, there is growing demand for composites in both new military aircraft development and the retrofitting of existing platforms to meet evolving strategic and operational requirements.

Asia Pacific is expected to register the third-highest CAGR during the forecast period.

The aerospace composites market has been studied for North America, Europe, Asia Pacific, Latin America, and the Middle East & Africa.

The Asia Pacific aerospace composites market is witnessing rapid growth, driven by a combination of strong industry demand and regional advancements. China, one of the world's leading producers and consumers of aerospace composites, is at the forefront, fueled by its expanding domestic aircraft manufacturing sector and rising need for lightweight, fuel-efficient materials. This surge in demand is significantly boosting market growth across the region. Additionally, countries like Japan and South Korea, with well-established aerospace and defense industries, are playing a vital role in supporting this expansion. Their emphasis on technological innovation and sustainability aligns well with the performance and environmental benefits offered by aerospace composites, ensuring sustained market momentum in the coming years.

Request Customization: https://www.marketsandmarkets.com/requestCustomizationNew.asp?id=246663558

Key players

Prominent companies in the aerospace composites market include Syensqo (Belgium), Toray Industries, Inc. (Japan), Mitsubishi Chemical Group Corporation (Japan), Hexcel Corporation (US), Teijin Limited (Japan), SGL Carbon (Germany), Spirit AeroSystems (US), Materion Corporation (US), Lee Aerospace (US), General Dynamics Corporation (US), 3M (US), FDC Composites Inc. (Canada), Avior Produits Intégrés Inc. (Canada), Collins Aerospace (US), and Aernnova Aerospace S.A. (Spain), among others.

Get access to the latest updates on  Aerospace Composites Companies and  Aerospace Composites Market Size

Browse Adjacent Market: Fibers and Composites Market Research Reports & Consulting

Related Reports:

Carbon Fiber Market - Forecast to 2030

Fiberglass Market - Global Forecasts to 2028

Hydrogen Tanks Market - Global Forecasts to 2030

Potassium Formate Market - Global Forecasts to 2030

Grignard Reagents Market - Global Forecasts to 2030

About MarketsandMarkets™ 

MarketsandMarkets™ has been recognized as one of America's Best Management Consulting Firms by Forbes, as per their recent report.

MarketsandMarkets™ is a blue ocean alternative in growth consulting and program management, leveraging a man-machine offering to drive supernormal growth for progressive organizations in the B2B space. With the widest lens on emerging technologies, we are proficient in co-creating supernormal growth for clients across the globe.

Today, 80% of Fortune 2000 companies rely on MarketsandMarkets, and 90 of the top 100 companies in each sector trust us to accelerate their revenue growth. With a global clientele of over 13,000 organizations, we help businesses thrive in a disruptive ecosystem.

The B2B economy is witnessing the emergence of $25 trillion in new revenue streams that are replacing existing ones within this decade. We work with clients on growth programs, helping them monetize this $25 trillion opportunity through our service lines – TAM Expansion, Go-to-Market (GTM) Strategy to Execution, Market Share Gain, Account Enablement, and Thought Leadership Marketing.

Built on the 'GIVE Growth' principle, we collaborate with several Forbes Global 2000 B2B companies to keep them future-ready. Our insights and strategies are powered by industry experts, cutting-edge AI, and our Market Intelligence Cloud, KnowledgeStore™, which integrates research and provides ecosystem-wide visibility into revenue shifts.

To find out more, visit www.MarketsandMarkets™.com or follow us on Twitter , LinkedIn and Facebook .

Contact:
Mr. Rohan Salgarkar
MarketsandMarkets™ INC.
1615 South Congress Ave.
Suite 103, Delray Beach, FL 33445
USA: +1-888-600-6441
Email: [email protected]
Visit Our Website: https://www.marketsandmarkets.com/

Logo: https://mma.prnewswire.com/media/1868219/MarketsandMarkets_Logo.jpg

SOURCE MarketsandMarkets