AMETEK Power Source Reduces Energy Consumption in Grid-Tied Inverter Testing

MX Series Programmable Power Source with Sink Option facilitates utility interconnection performance and anti-islanding compliance in solar inverter testing; reduces total energy consumption by returning over 50% of power to the utility.

Jun 03, 2010, 16:58 ET from AMETEK Programmable Power

SAN DIEGO, June 3 /PRNewswire/ -- The California Instruments brand MX Series AC / DC Power Source from AMETEK Programmable Power is now available with a power sink option (SNK) that dramatically reduces the total energy consumed in the production testing of grid-tied inverters designed for distributed resources such as solar energy systems. By utilizing the MX Series to simulate the interconnection with the utility grid, the output power generated by the inverter is returned to the grid saving over 50% of the energy consumption. The MX Series programmable source may be programmed to simulate utility power variability (voltage, frequency, harmonic distortion) necessary to test the inverter's ability to source energy to the grid. In addition, the unit can dynamically test the inverter's ability to comply with the anti-islanding tests required of grid-tied distributed resources. Islanding is the term used to describe the unsafe operation of a distributed resource in the event of a loss of utility power.

(Logo:  http://www.newscom.com/cgi-bin/prnh/20091118/LA13866LOGO)

"The use of the MX Series in this application can result in significant reduction of energy usage in production testing," comments Eric Turner, AMETEK product manager for solar energy test systems.  "Instead of using a load bank to dissipate the energy in the form of heat, over half of the energy is returned to the grid. And the added energy costs needed for cooling are also eliminated."

The California Instruments MX Series is available in power levels from 15 kVA to 270 kVA. The MX Series uses a sophisticated digital signal processor-based arbitrary waveform generator and power analyzer. This integrated, multi-instrument approach effectively eliminates the need for additional equipment to create a complete AC and DC power test system. Using a large graphical LCD display, the advanced measurement and analysis capabilities can be accessed directly from the front panel without the need for remote control. IEEE-488, RS-232C, USB and Ethernet interfaces are included and Windows™ Graphical User Interface application software comes with each MX unit.

For more information, contact AMETEK Programmable Power sales at www.programmablepower.com or contact an authorized sales representative.

AMETEK Programmable Power is a division of AMETEK, Inc, a leading global manufacturer of electronic instruments and electromechanical devices with 2009 sales of $2.1 billion.

Editor Contact:

AMETEK Programmable Power

Craig Frahm, Marketing Manager

9250 Brown Deer Road

San Diego, CA 92121

Phone: 858.678.4459

Email: craig.frahm@ametek.com


Agency Contact:

WelComm, Inc.

Greg Evans, P.E.

7975 Raytheon Road, Suite 340

San Diego, CA 92111

Phone: 858.279.2100

Email: greg@welcomm.com



SOURCE AMETEK Programmable Power



RELATED LINKS

http://www.programmablepower.com