ATK and NASA Successfully Test the Second Five-Segment Ares Development Motor (DM-2)

DM-2 Test Collected More Data than any Previous Solid Rocket Motor Test

Test Data Will Provide Valuable Information for the Development of Future Launch Vehicles

Aug 31, 2010, 12:42 ET from ATK

PROMONTORY, Utah, Aug. 31 /PRNewswire/ -- Alliant Techsystems (NYSE: ATK) and NASA conducted a successful ground test earlier today of the second Ares five-segment Development Motor (DM-2).  The successful test is an important milestone in the development of America's next generation of launch vehicles.

Initial test data indicated that the motor, which was chilled to a 400 F core temperature since early July, performed as designed, producing approximately 3.6 million pounds of thrust, or 22 million horsepower, and burned for just over two minutes.  The test collected 764 channels of data to accomplish 53 test objectives.  This is the most data ATK has ever collected in a static fire test.

"The information collected from this test, used together with data from DM-1 and the Ares I-X flight test, will help further validate the five-segment design leading to critical design review next year," said Charlie Precourt, vice president and general manager, ATK Aerospace Systems, Space Launch Systems.  "The data will also confirm the performance and reliability of this solid rocket, which can be configured for use on multiple launch vehicles."

The five-segment rocket was designed to maximize astronaut safety while providing the United States with an affordable and reliable launch capability for both crew and cargo missions.  For example, a single five-segment solid rocket motor first stage, coupled with a liquid upper stage, would be able to lift more than 55,000 pounds of payload directly to Low Earth Orbit.

The main test objectives from today's static motor firing were measuring the first-stage rocket's performance at cold temperatures, and verifying the performance of new materials in the motor joints at the lowest range of operational temperatures.

"Testing at these extremes aids us in fully understanding all operating conditions for this motor," said Precourt, a former shuttle astronaut.  "This data, along with information we have collected over the past three decades, confirms that this is the most powerful and reliable solid rocket motor ever designed, and it is the right motor to ensure the safety of our astronauts."

DM-2 is the largest human-rated solid rocket motor built today, measuring 12 feet in diameter and 154 feet in length.  The five-segment motor is based on the design heritage of the flight-proven Solid Rocket Boosters on the Space Shuttle Program, and has been upgraded to incorporate modern technologies and materials.  These include the addition of a fifth segment, changes to the propellant grain, a larger nozzle opening and upgraded insulation and liner.

The five-segment cases remain the same as those used for more than three decades on the Space Shuttle Program.  Just like shuttle cases, the cases for this rocket are designed to be recovered and reused.  This enables NASA and ATK to collect vital post-flight information and performance data, confirming a safe and robust design.  The cases used in this ground test have collectively flown on 57 previous shuttle missions.

As the prime contractor, ATK continues to perform on schedule and on cost in support of NASA's space exploration programs.  The next test for the program, Development Motor-3, will be a hot temperature test conducted next year.

ATK is a premier aerospace and defense company with more than 18,000 employees in 24 states, Puerto Rico and internationally, and revenues of approximately $4.8 billion. News and information can be found on the Internet at www.atk.com.

Certain information discussed in this press release constitutes forward-looking statements as defined in the Private Securities Litigation Reform Act of 1995.  Although ATK believes that the expectations reflected in such forward-looking statements are based on reasonable assumptions, it can give no assurance that its expectations will be achieved.  Forward-looking information is subject to certain risks, trends and uncertainties that could cause actual results to differ materially from those projected.  Among those factors are: the challenges of developing new launch vehicles and the uncertainty regarding the Administration's proposed funding profile of the Constellation program; changes in governmental spending, budgetary policies and product sourcing strategies; the company's competitive environment; the terms and timing of awards and contracts; and economic conditions.  ATK undertakes no obligation to update any forward-looking statements.  For further information on factors that could impact ATK, and statements contained herein, please refer to ATK's most recent Annual Report on Form 10-K and any subsequent quarterly reports on Form 10-Q and current reports on Form 8-K filed with the U.S. Securities and Exchange Commission.

Media Contact:

Investor Contact:

Trina Patterson

Jeff Huebschen

Phone:  801-699-0943

Phone:  952-351-2929

E-mail:  trina.patterson@atk.com

E-mail:  jeff.huebschen@atk.com

SOURCE ATK



RELATED LINKS

http://www.atk.com