Integrated pump, motor and drive built for 800 VDC power and megawatt-class AI racks
CHICAGO, Nov. 16, 2026 /PRNewswire/ -- Aviemore Motion Technologies today introduced its seal-less magnetic coupling pumps for liquid-cooled AI and high performance computing at SC26 in Chicago, the international conference for high performance computing. The patent-pending design eliminates the shaft seal, the most common point of wear in a coolant pump. Aviemore delivers the pump, motor and drive as one complete system under a single part number.
AI racks draw 140 kW today. Racks of 240 kW are close behind and 600 kW to megawatt-class racks are in future planning. Power inside the rack is also moving from 54 VDC to 800 VDC, with the first commercial systems expected to ship in Q2 2027. Cooling units built for these racks need pumps that run nonstop, fit in tight spaces and connect directly to high-voltage DC power. Aviemore built its platform for that paradigm shift.
Nearly every watt an AI processor uses turns into heat. Removing that heat is one of the biggest jobs in a data center. Liquid cooling does it far better than air, and the pump is what keeps the coolant moving. Rack and row cooling loops are closed systems. The same coolant circulates over and over instead of being used up, which helps operators cut the water and energy spent on cooling. With no shaft seal, an Aviemore pump keeps that loop closed.
"Liquid cooling is now critical infrastructure and the pump is the one moving part every rack depends on," said Moe Barani, CEO of Aviemore. "Most pumps on the market were designed for another era and adapted for the data center. We designed ours for where AI infrastructure is going. There is no seal to leak or wear out, the drive runs natively on 800 VDC and our team can turn a custom change in weeks instead of quarters."
How it works
Aviemore pumps transmit torque through a magnetic coupling across a non-contact sealed barrier. Nothing passes through the wet end. There is no dynamic seal and no wear item in the fluid path. The pumps can run dry during commissioning or a loss of prime, two common causes of early pump failure. A slotless brushless DC motor and integrated drive complete the assembly. CDU builders source, qualify and service one component instead of three.
The platform covers 0.10 to 5.0 kW of output across a 12 to 800 V DC bus range.
Most pumps in data center cooling today come from legacy manufacturers that adapted designs built for other industries. They still rely on a shaft seal, a bolt-on motor and a third-party drive. Their development cycles are measured in years while AI rack designs change every year.
"The traditional pump industry is full of dinosaurs," said Matt Carroll, VP of Engineering at Aviemore. "They are still selling the same seal, the same separate motor and the same slow change process. Data center operators are left to design around it. We started from a clean sheet. The seal is gone and the motor and drive are built in. When a customer needs a change, our engineering team turns it in weeks."
Product lines
- Rack CDU Pumps: 0.10 to 2.0 kW, 12 to 800 V DC, AC and DC drive, for in-rack and sidecar CDUs
- Row and Facility Pumps: 1.0 to 5.0 kW, 12 to 800 V DC, AC and DC drive, for row CDUs, coolant skids, and facility loops
- OEM Custom Solutions: co-engineered and built to the customer's architecture, with AC and DC drive options
Proven motor technology, built in Virginia
The Aviemore team has worked together for more than 25 years and has deep experience in data center thermal hardware. Its proprietary slotless motor design has shipped in more than 15,000 motors with zero motor defects. The team has been designing proprietary, patented pumps for the past 20 years and those products remain in service at hyperscale operators today.
Aviemore designs and builds its pumps in a 156,000 square foot facility in Radford, Virginia. Winding, machining, assembly and test all happen in house, which is how the company turns design changes in weeks. The quality system is built on ISO 9001 and products are UL and Intertek certifiable on request.
Data centers are often criticized for bringing few jobs to the towns that host them. Much of the hiring happens in the supply chain that builds the equipment inside. Every Aviemore pump is designed and built in Radford. That supports skilled engineering and manufacturing jobs in Southwest Virginia, and the team grows as AI demand grows.
Aviemore works with Intertek on testing and certification and with Virginia Tech on research. It also partners with the Virginia Economic Development Partnership and GO Virginia on regional industry growth.
Meet Aviemore at SC26
Supercomputing was one of the first fields to adopt direct liquid cooling. The rack densities HPC pioneered are now reaching AI data centers. The Aviemore team is at SC26 in Chicago this week to meet with HPC system builders, thermal engineers and CDU manufacturers. To schedule time or get a pump sized, contact [email protected].
About Aviemore
Aviemore Motion Technologies LLC designs and manufactures seal-less magnetic coupling pumps for liquid-cooled AI and data center infrastructure. Each pump combines the hydraulics, a slotless BLDC motor and an integrated drive in a single assembly. The range covers 0.10 to 5.0 kW and DC bus voltages up to 800 V. Aviemore is headquartered in Radford, Virginia. Learn more at aviemoretech.com.
Media Contact
Ben Khandan-Barani, COO
Aviemore Motion Technologies
[email protected] | 540-922-9631
113 Corporate Drive, Radford, VA
SOURCE Aviemore Motion Technologies


Share this article