Boston Scientific SYNERGY™ Stent Demonstrates Comparable Safety and Effectiveness Outcomes Versus PROMUS Element™ Platinum Chromium Stent

NATICK, Mass. and SAN FRANCISCO, Nov. 11, 2011 /PRNewswire/ -- Boston Scientific Corporation (NYSE: BSX) reports results from the EVOLVE First Human Use trial demonstrating the non-inferiority of the SYNERGY™ Everolimus-Eluting Stent System compared to the PROMUS Element™ Everolimus-Eluting Stent System in treating de novo coronary artery lesions.  The trial provided 30-day clinical and six-month angiographic primary endpoint data evaluating the safety and effectiveness of the bioabsorbable polymer-coated SYNERGY Stent.  Results were presented today during a late-breaking clinical session by Professor Ian T. Meredith, M.B.B.S., Ph.D., Director of MonashHeart, Monash Medical Centre, Melbourne, Australia, and Principal Investigator of the trial, at the Cardiovascular Research Foundation's annual Transcatheter Cardiovascular Therapeutics (TCT) scientific symposium in San Francisco.

The prospective, randomized, single-blind, non-inferiority trial enrolled 291 patients at 29 sites in Europe, Australia and New Zealand.  Patients were randomized to either one of two dose formulations of everolimus used on the SYNERGY Stent, which employs an ultra-thin abluminal bioabsorbable polymer, or to the commercially available PROMUS Element Stent, which employs the everolimus drug and a permanent durable polymer.  One formulation of the SYNERGY Stent used an everolimus dose and release profile similar to the PROMUS Element Stent, while the second formulation of the SYNERGY Stent used a similar release profile but half the dose of everolimus.

"The SYNERGY Stent met the primary non-inferiority endpoint of six-month late loss compared to the PROMUS Element Stent, demonstrating effectiveness of drug elution from this abluminal bioabsorbable polymer," said Dr. Meredith.  "The platform also appears to be safe with very low rates of myocardial infarction and revascularization and no reported cardiac deaths or stent thrombosis.  The SYNERGY Stent is designed to address potential limitations with durable polymer coatings used on currently available drug-eluting stents, which may be associated with chronic inflammation and impaired healing.  The impressive clinical and angiographic results from EVOLVE bode well for this innovative new coronary stent technology."

The primary angiographic endpoint of independently adjudicated mean late loss at six months was 0.10 mm for the SYNERGY Stent and 0.13 mm for the half-dose SYNERGY Stent, compared with 0.15 mm for the PROMUS Element Stent (p<0.001 for the non-inferiority comparison for both SYNERGY doses versus PROMUS Element).  Additional six-month angiographic outcomes for diameter stenosis and binary restenosis showed no statistical differences between the SYNERGY and PROMUS Element Stents.

The trial met the primary clinical endpoint of target lesion failure (TLF) at 30 days, defined as target-vessel-related cardiac death, target-vessel-related myocardial infarction (MI) or ischemia-driven target lesion revascularization (TLR).  At 30 days, TLF in both SYNERGY Stent arms was not statistically different from the PROMUS Element Stent (1.1 percent for the SYNERGY Stent versus 0.0 percent for the PROMUS Element Stent, p=0.49 for superiority comparison, and 3.1 percent for the half-dose SYNERGY Stent, p=0.12 for superiority comparison with the PROMUS Element Stent).  TLF continued to show no significant differences among the three stent groups out to six months with rates of 2.2 percent for the SYNERGY Stent versus 3.1 percent for the PROMUS Element Stent (p=1.00) and 4.1 percent for the half-dose SYNERGY Stent (p=0.72 versus the PROMUS Element Stent).  Clinical follow-up at six months demonstrated no events for cardiac death, Q-wave MI and stent thrombosis.  MI was 1.1 percent for the SYNERGY Stent, 0.0 percent for the PROMUS Element Stent (p=0.49) and 3.1 percent for the half-dose SYNERGY Stent (p=0.25), all presenting as Non-Q-wave MI.  TLR was 1.1 percent for the SYNERGY Stent, 3.1 percent for the PROMUS Element Stent (p=0.62) and 1.0 percent for the half-dose SYNERGY Stent (p=0.62).

The SYNERGY Stent uses a bioabsorbable PLGA polymer and everolimus drug combination to create an ultra-thin, uniform coating applied to the outer (abluminal) surface of the stent.  After the drug has been delivered, the bioabsorbable coating is designed to resorb within four months, leaving only a bare-metal stent.  This technology is designed to provide the same degree of restenosis reduction as a conventional drug-eluting stent while offering faster and more complete vessel healing after stent implantation, which could potentially reduce the duration of post-procedure dual antiplatelet therapy.  The SYNERGY Stent features the same proprietary platinum chromium alloy and similar stent design used in the PROMUS Element Stent to enable thinner struts, increased conformability, deliverability and flexibility while reducing recoil and improving visibility.

"Our fourth-generation SYNERGY Stent is designed to offer the performance advantages of our innovative platinum chromium platform while significantly reducing the amount of polymer and drug to which the vessel wall is exposed," said Keith D. Dawkins, M.D., Senior Vice President and Chief Medical Officer of Boston Scientific's Cardiology, Rhythm and Vascular Group.  "EVOLVE trial data will be used to support CE Mark approval for SYNERGY, while additional larger studies are planned to further assess clinical event rates and the potential for reduced dual antiplatelet therapy with this novel stent technology.  The SYNERGY Stent demonstrates our ongoing commitment to innovation and clinical science in pursuing the most advanced treatment options for our physician customers and their patients."

In the U.S., the SYNERGY Stent and the PROMUS Element Stent are investigational devices, limited by applicable law to investigational use only and not available for sale.  

About Boston Scientific

Boston Scientific is a worldwide developer, manufacturer and marketer of medical devices whose products are used in a broad range of interventional medical specialties.  For more information, please visit: www.bostonscientific.com.  

Cautionary Statement Regarding Forward-Looking Statements

This press release contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934.  Forward-looking statements may be identified by words like "anticipate," "expect," "project," "believe," "plan," "estimate," "intend" and similar words.  These forward-looking statements are based on our beliefs, assumptions and estimates using information available to us at the time and are not intended to be guarantees of future events or performance.  These forward-looking statements include, among other things, statements regarding our business plans, regulatory approvals, clinical trials and clinical trial plans, SYNERGY and PROMUS Element stent systems performance and effects.  If our underlying assumptions turn out to be incorrect, or if certain risks or uncertainties materialize, actual results could vary materially from the expectations and projections expressed or implied by our forward-looking statements.  These factors, in some cases, have affected and in the future (together with other factors) could affect our ability to implement our business strategy and may cause actual results to differ materially from those contemplated by the statements expressed in this press release.  As a result, readers are cautioned not to place undue reliance on any of our forward-looking statements.  

Factors that may cause such differences include, among other things: future economic, competitive, reimbursement and regulatory conditions; clinical trial results; new product introductions; demographic trends; intellectual property; litigation; financial market conditions; and future business decisions made by us and our competitors.  All of these factors are difficult or impossible to predict accurately and many of them are beyond our control.  For a further list and description of these and other important risks and uncertainties that may affect our future operations, see Part I, Item 1A – Risk Factors in our most recent Annual Report on Form 10-K filed with the Securities and Exchange Commission, which we may update in Part II, Item 1A – Risk Factors in Quarterly Reports on Form 10-Q we have filed or will file hereafter.  We disclaim any intention or obligation to publicly update or revise any forward-looking statements to reflect any change in our expectations or in events, conditions or circumstances on which those expectations may be based, or that may affect the likelihood that actual results will differ from those contained in the forward-looking statements.  This cautionary statement is applicable to all forward-looking statements contained in this document.

SOURCE Boston Scientific Corporation