More Clean Diesel Trucks Now On the Road Means Lower Fuel Consumption and Fewer Greenhouse Gas Emissions
National Savings of 880 Million Gallons of Diesel Fuel (2007-2014) Comes as President Announces Proposed Second-Phase Rulemaking for Truck Efficiency
WASHINGTON, June 19, 2015 /PRNewswire-USNewswire/ -- Emissions are going down and fuel savings and greenhouse gas emissions benefits are going up in the nation's commercial trucking fleet as more truckers invest in new technology clean diesel engines, according to new research released today by the Diesel Technology Forum.
The new generation of clean diesel vehicles is a growing portion of the total diesel commercial truck population with more than 37 percent of all diesel medium and heavy duty commercial trucks registered in the United States now equipped with newer technology clean diesel engines - those manufactured in Model Year 2007 or newer that have near zero particulate emissions.
And nearly 22 percent of all diesel trucks in operation are now the newest clean diesel technology (2010 and later model year) that are also near zero emissions in nitrogen oxides.
"Today's new generation of clean diesel technology offers better fuel economy and better performance that translates into greater savings for truckers - and cleaner air for all Americans,"said Allen Schaeffer, the Executive Director of the Diesel Technology Forum.
"New diesel vehicles are increasing their penetration in the marketplace because they are more fuel efficient, in part, due to meeting the requirements of Phase 1 of the U.S. EPA/NHTSA Fuel Efficiency standards that went into effect in 2014. We fully expect that diesel technology will remain a dominant factor in achieving the President's newly proposed second round of truck efficiency and emissions standards," Schaeffer said.
Phase 2 Efficiency & GHG Standards "Challenge Engine and Truck Manufacturers To Go Even Further in Saving Fuel"
"The proposed rule establishing a second phase of reductions in CO2 emissions and improvements in fuel efficiency announced today will challenge engine and truck manufacturers to go even further in saving fuel for customers," Schaeffer said. "Manufacturers will continue to work with EPA, NHTSA and the California Air Resources Board toward a final rule that will enable continued progress in investing in new and more fuel efficient vehicles."
New Diesel Technology Has Resulted In Major Reductions in NOx & PM Emissions
"Our newest analysis of the benefits of the new technology diesel engines conducted by the Martec Group from Detroit MI found in Classes 3-8 vehicles that those on the road from 2007 -2014 saved 880 million gallons of diesel fuel, and nine million tons of CO2. In addition, the new technology diesel engines contributed substantially to the nation's clean air progress by reducing 1.45 million tons of NOx (2007-2014) and 39,500 tons of Particulate Matter," Schaeffer said.
"Over the past couple of years there has been a lot of speculation about a 'revolution' in fuels and technology in the trucking industry. The 2014, year-end U.S. truck vehicles-in-use data shows that 9.1 million are powered by diesel engines, and among the largest trucks, (Class 8) diesel vehicles-in-use accounted for 3.6 million of the overall population. So it appears that the 'revolution' is that truckers are choosing new clean diesel truck technology in increasing numbers over all other fuel sources," Schaeffer said.
Fuel Efficiency & Reduced Emissions Help Diesels Continue Domination of U.S. Market
"Emissions from today's diesel trucks and buses are near zero thanks to more efficient engines, more effective emissions control technology and the nationwide availability of ultra-low sulfur diesel fuel," Schaeffer said. "The new clean diesel technology has reduced emissions from heavy-duty diesel trucks and buses by 99 percent for nitrogen oxides (NOx) and 98 percent for particulate emissions.
"In addition, model year 2010 and later trucks are experiencing an average of three to five percent improvement in fuel economy resulting in petroleum reduction equivalent to 21 million barrels of crude oil. Additional fuel-saving strategies are being developed to improve efficiency, including further engine refinements, vehicle aerodynamics and expanded use of hybrid technology for some applications."
Beginning in 2007, all heavy duty diesel trucks sold had to meet particulate emissions levels of no more than 0.01 grams per brake horse-power hour (g/HP-hr)compared to a 1988 models with emissions at no more than .6 g/Hp-hr.
Schaeffer said strong truck sales in 2014 translated into increasing percentages of new clean diesel vehicles on the road. For the total category of commercial trucks, 37.7 percent of Class 3-8 diesel vehicles in operation were Model Year 2007 or newer, and 20.6 percent were Model Year 2010 or newer. Among Class 8 trucks, 38.1 percent were MY 2007 or newer, and 21.8 percent were MY 2010 or newer.
The analysis of new technology penetration is based on 2014 data of Class 3-8 vehicles in operation (VIO) that were compiled by IHS Automotive in all 50 states and the District of Columbia through December 31, 2014. The Diesel Technology Forum used the VIO data to calculate the top states in registrations and the overall percentages of diesel and natural gas. Benefits (CO2, NOx, PM emissions reductions and fuel savings) were calculated by the Martec Group separately.
Connect with DTF
For the latest insights and information from the leaders in clean diesel technology, join us on Facebook, follow us on Twitter @DieselTechForum, or YouTube @DieselTechForum and connect with us on LinkedIn.
ABOUT THE DIESEL TECHNOLOGY FORUM
The Diesel Technology Forum is a non-profit organization dedicated to raising awareness about the importance of diesel engines, fuel and technology. Forum members are leaders in clean diesel technology and represent the three key elements of the modern clean-diesel system: advanced engines, vehicles and equipment, cleaner diesel fuel and emissions-control systems. For more information visit www.dieselforum.org.
View this press release online here.
Available Topic Expert(s): For information on the listed expert(s), click appropriate link.
Allen Schaeffer
ProfNet - https://profnet.prnewswire.com/Subscriber/ExpertProfile.aspx?ei=111282
Contact:
Allen Schaeffer
[email protected]
301-668-7230 (o)
301-514-9046 (c)
Photo - http://photos.prnewswire.com/prnh/20150619/224342
Logo - http://photos.prnewswire.com/prnh/20120201/MM46474LOGO
SOURCE Diesel Technology Forum
Share this article