Also sponsoring the Lift Safety Zone and new Crane & Rigging Education Track
FAIRFAX, Va., Jan. 9, 2014 /PRNewswire-USNewswire/ -- Live equipment demonstrations, nationally accredited certification examinations, education sessions and practical examiner training will all go to make for the largest ever participation at any construction event in almost two decades by the National Commission for the Certification of Crane Operators (NCCCO) at the forthcoming CONEXPO/CON-AGG, the Virginia-based non-profit organization has announced.
New candidates and existing certificants alike will be given an opportunity to take a wide variety of ANSI-accredited and OSHA-compliant CCO written, practical, and recertification exams at CONEXPO/CON-AGG, to be held March 4–8, 2014, in Las Vegas, NV. And thanks to NCCCO's "Visit CONEXPO-Leave Certified" program featuring onsite scoring and immediate test results, successful candidates will be able to walk away from the event certified. Additionally, practical examiner workshops for most CCO programs will be conducted onsite before and after the exposition.
NCCCO will again co-sponsor the Lift Safety Zone now relocated to the Gold Lot, the acknowledged "nexus" of the show's crane exhibits. NCCCO is also sponsoring a series of educational seminars in CONEXPO's new Crane & Rigging track developed at the request of the Association of Equipment Manufacturers (AEM). All of these activities promote safe practices on construction sites and illustrate the need for qualified personnel, in line with state and federal requirements.
The once-every-three-years equipment showcase will feature over 2,400 exhibitors and is expected to draw more than 130,000 attendees. "CONEXPO/CON-AGG provides an excellent opportunity for expo attendees to earn or renew their CCO certifications while attending one of the largest events of its kind in the world," noted NCCCO Executive Director Graham Brent.
NCCCO's activities at CONEXPO/CON-AGG 2014 include:
- Lift Safety Zone (G-1817 in Gold Lot)—featuring live CCO practical exam demonstrations, and crane and rigging safety best practices with a special emphasis on operating cranes safely around power lines
- NCCCO Information Booth (GL-20000)—providing information about all CCO certification programs as well as NCCCO's activities around the exposition
- CCO Written, Practical, and Recertification Exam Administrations—allowing candidates to recertify or earn new CCO certification(s)
- Practical Examiner Accreditation Workshops for aspiring CCO crane operator, rigger, and signalperson examiners, held before and after the main exposition
- Educational Seminars—featuring world-class experts providing up-to-the-minute information on an array of issues of critical importance to crane users in construction.
"CONEXPO/CON-AGG is delighted that the National Commission for the Certification of Crane Operators has elected to schedule its OSHA-recognized and ANSI-accredited crane operator and related certification examinations at the 2014 event," said Megan Tanel, vice president of exhibitions and events for the Association of Equipment Manufacturers (AEM), the organization that operates CONEXPO/CON-AGG. "This will provide an exceptional opportunity for crane operators and those who work around cranes to ensure that they are professionally certified to work in compliance with the pending OSHA rules on crane and lifting personnel."
NCCCO Information Booth
NCCCO's main informational exhibit will be in its usual prime location at booth GL-20000 in the Grand Lobby by the North Hall next to Silver Lot and just across from the Gold Lot, where the world's leading crane manufacturers will be located. NCCCO staff will be on hand throughout the exhibition to answer questions about all CCO certification programs currently available and in development. Visitors will be able to watch videos of NCCCO practical exams, as well as enter a drawing for die-cast model cranes generously donated by the world's leading manufacturers.
CCO Certification Exam Administrations
On Tuesday, March 4 and Friday, March 7, CONEXPO/CON-AGG attendees will be able to sit for any of the ANSI-accredited CCO written exams in dedicated rooms located near the NCCCO booth. This includes all programs, both regular and recertification exams. To register and for the complete schedule of written exams, please contact Shawna Parham at email@example.com. Preregistration is required for all written exams and for the Signalperson and Rigger Level I practical exams.
On all five days of the show, CCO practical exams will be offered for mobile, service truck, and articulating crane operators. On Wednesday and Thursday practical exams will be offered for the Signalperson and Rigger Level I programs. To register and schedule practical exams, please contact Erin Jones at firstname.lastname@example.org.
Practical Examiner Accreditation Program Workshops
In the days before, during, and after the exposition, NCCCO will hold Practical Examiner Accreditation Program (PEAP) workshops for CCO certificants seeking to become Practical Examiners for CCO programs. Two-day workshops for articulating cranes and service truck cranes will be held before the expo on February 28-March 1; a three-day mobile crane PEAP will be held after the expo on March 9-11 with a one day refresher workshop on March 8; a one-day Signalperson workshop will be held on March 8; a two-day Rigger Level I on March 9-10; and a two-day Rigger Level II workshop will be held on March 11-12. Please direct any questions about the PEAP workshops to Erin Jones at email@example.com. Preregistration is required for all PEAP workshops.
Lift Safety Zone
For the second time at CONEXPO, NCCCO is co-sponsoring the Lift Safety Zone (LSZ). Developed in conjunction with the International Powered Access Federation (IPAF) and centrally located in Gold Lot #1817, the LSZ will once again profile best practices in crane and rigging activities with live demonstrations throughout the event. Industry experts will be on hand to provide practical safety advice to those who operate, manage, and work with cranes and aerial lifts. NCCCO's mobile crane practical exams and CCO rigger certification will be prominently featured.
The show's organizer, the Association of Equipment Manufacturer (AEM) has provided an exceptional opportunity for a dedicated Crane and Rigging education track at CONEXPO 2014, and NCCCO has assisted in assembling a stellar lineup of presentations on a host of crane and rigging topics. All speakers are veteran safety professionals and experts in their field, and many actively participate in the NCCCO Commission and exam management committees. The following seminars are planned for the Crane & Rigging seminar track:
- 2014 OSHA Requirements for Crane Operator Certification
- What's New in Tower Crane Standards?
- Cranes—A Walk Through Time—Technology and Regulatory
- Mobile Crane Blocks and Calculation of Sling Loads
- Top 10 Losses in Crane & Rigging
- Reliability Measures for Effective Training
- Key Issues in Crane Safety
- The Mechanics of a "Super Lift"
- So You Think You're a Lift Director?
- An Examination of Crane Incidents
- Safety of Equipment Around Power Lines
The National Commission for the Certification of Crane Operators (NCCCO) is an independent, non-profit organization established in 1995 by industry to develop and administer a nationwide program for the certification of crane operators and related personnel. Since then, NCCCO has administered over 800,000 nationally accredited written and practical examinations and issued more than 170,000 nationally accredited and OSHA-compliant certifications in all 50 states.
Available Topic Expert(s): For information on the listed expert(s), click appropriate link.
SOURCE National Commission for the Certification of Crane Operators