RoboParty Unveils RP1, a High-Performance Full-Stack Open-Source Humanoid Robot at IROS

From RPO and Romomo to PartyOS, RoboParty is building an open humanoid robotics foundation for developers worldwide.

PITTSBURGH, Oct. 3, 2026 /PRNewswire/ -- On September 28, 2026, RoboParty publicly unveiled RP1 (ROBOTO 01) at IROS 2026, marking the robot's global debut.

In January 2026, RoboParty fully open-sourced RPO (ROBOTO ORIGIN), its first open-source humanoid robotics project. To date, RPO has received more than 2,500 GitHub stars. As a developer-oriented open-source humanoid robot, RPO has attracted broad attention worldwide and inspired multiple community builds and reproductions.

Building on this foundation, RoboParty positions RP1 as the world's first high-performance full-stack open-source bipedal humanoid robot. RP1 is designed for researchers, educators, robotics developers and embodied AI teams, with the goal of providing a humanoid robotics system that can be used, modified, trained and continuously extended in real development workflows.

Kick Me: Putting Dynamic Stability to the Test

At RoboParty's IROS booth, the "Kick Me" interactive demonstration was one of the most direct ways for visitors to experience RP1's capabilities.

During the demonstration, visitors could directly apply external disturbances to the robot. When pushed or kicked, RP1 rapidly adjusted its posture and recovered its balance. Unlike demonstrations based only on predefined motions, this open interaction allowed visitors to observe the robot's dynamic stability and control performance under external disturbances.

The repeated high-intensity interactions also provided a direct test of the robot's body performance and system-level robustness.

RP1's dynamic motion and disturbance-recovery capabilities at IROS were supported by PartyOS, RoboParty's open R&D foundation for humanoid robotics, which integrates the UFO framework.

UFO — short for "A General Unsupervised Reinforcement Learning Framework for Humanoid Control" — is a training framework for discovering humanoid motor skills through unsupervised reinforcement learning. It trains low-level motion policies that allow robots to learn dynamic behaviors without relying entirely on conventional predefined motion trajectories, including skill transitions, disturbance recovery and fall recovery.

Rather than treating motion control as an isolated algorithmic module, RoboParty is integrating the robot body, actuator modules, low-level control and embodied AI algorithms into one system for continuous joint validation. The goal is to ensure that algorithmic capabilities are built on a stable and reproducible humanoid robotics platform.

The IROS demonstration marked an important validation milestone for this technical direction.

Throughout the exhibition, researchers, university faculty and students, robotics developers and industry professionals from different countries and regions visited RoboParty's booth. Discussions extended beyond motion performance to RP1's robot body, Romomo actuator modules, motion control, modular design and future open-source plans.

Multiple research teams and developers also discussed the procurement of robots and core components, algorithm reproduction, embodied AI research and open-source collaboration with the RoboParty team.

From Closed Systems to Full-Stack Open Source

With RP1, RoboParty is exploring an alternative path for humanoid robotics.

Today, high-performance humanoid robots are typically delivered as complete products or closed systems. Researchers and developers may be able to use or observe these robots, but the underlying hardware, motion-control systems, simulation environments and software stacks are often difficult to inspect, modify, reproduce or extend.

RP1 is designed to redefine how humanoid robots are developed — from a developer's perspective.

For RoboParty, "full-stack open source" does not mean releasing only mechanical files or a single software module. In addition to the robot body and core actuator modules, RoboParty plans to progressively open its motion-control systems, simulation environments, SDKs, training tools and PartyOS development foundation.

This will allow developers to participate more deeply in humanoid robotics development, from hardware and low-level control to model training and deployment.

"Humanoid robots should not be closed systems that only a small number of teams can build while everyone else can do little more than watch," said Yi Huang, founder of RoboParty. "We want RP1 to become an open foundation that developers can access, modify, train and continuously improve. Full-stack open source has been our technical direction since the RPO project."

RoboParty plans to announce further details of RP1's open-source roadmap in October 2026, with broader software and hardware releases and a mass-production program to follow later in Q4.

RP1: A High-Performance Open-Source Body for Embodied AI

RP1 is designed to provide a high-performance humanoid platform for dynamic motion, embodied AI model training, validation and deployment, data collection and continuous development.

RP1 delivers peak joint torque of up to 160 N•m. From its in-house-developed Romomo actuator modules and mechanical structure to its real-time motion-control system, RP1 is designed around the requirements of dynamic motion, disturbance recovery and long-term development experiments.

These capabilities were demonstrated live at IROS. During the "Kick Me" interaction, visitors directly applied external disturbances while RP1 adjusted its posture and regained its balance. The robot also demonstrated continuous motion, disturbance recovery and fall recovery. These behaviors reflected not only algorithmic performance but also the coordination of the robot body, actuator modules and motion-control system.

RP1 builds on RoboParty's broader full-stack open-source roadmap.

RoboParty began with RPO, its fully open-source bipedal humanoid robotics project. Through the development and community adoption of RPO, RoboParty expanded its technical capabilities to cover core actuators, robot bodies, motion control, dexterous manipulation and robotics software systems.

RoboParty subsequently introduced the Romomo actuator modules and its dexterous RP Hand while continuing to build PartyOS.

RPO validated an open-source bipedal robot body, motion-control system and developer workflow. Romomo expanded the technical foundation to cover core actuator modules. RP Hand extended the stack into dexterous manipulation and human-robot interaction. RP1 now brings these capabilities together into a humanoid robotics system designed for research and development.

Based on these capabilities, PartyOS is evolving across humanoid locomotion, perceptual interaction, whole-body manipulation and autonomous intelligent humanoids.

By bringing the robot body, actuators, motion control, perception, manipulation and intelligent software into one coordinated development system, RoboParty is building a full-stack open-source humanoid robotics platform from low-level hardware to high-level intelligence.

Building a Global Developer Community

RoboParty's team spans robot hardware, motion control, artificial intelligence, systems software and manufacturing engineering. Core team members studied at Tsinghua University's Yao Class, Peking University's Zhi Class, Harbin Institute of Technology, Stanford University, Carnegie Mellon University, Zhejiang University and other leading institutions.

RoboParty has already built a global community of more than 5,000 developers across research, education and maker communities.

As RP1 becomes progressively more open, RoboParty aims to further develop this community into an open ecosystem spanning robot hardware, algorithms, data and applications, enabling more researchers, model-development teams and developers to participate in building and advancing humanoid robotics.

Media Contact: [email protected] 

GitHub: https://github.com/Roboparty/roboto_origin

Website: https://roboparty.com/

SOURCE RoboParty