Wafer Foundry Market: 15% Growth in 2014, 6% in 2015 Forecast for Global and China Industry

DALLAS, October 9, 2014 /PRNewswire/ --

The wafer foundry market experienced a wavy development, jumping by 39.4% in 2010 following a 7.9% decline in 2009. And the growth rate first shrank to 8.7% in 2011, then expanded to 21.7% in 2012, and fell back to 6.8% in 2013. It is projected that the growth rate will stand at 15.6% in 2014 and 6.0% in 2015. The fluctuation in the wafer foundry market will begin to present an increasingly small growth rate, which is mainly because of the differentiation in wafer foundry industry. This and more information can be read in the research titled Global and China Wafer Foundry Industry Report, 2013-2014 available with ChinaMarketResearchReports.com.

The Global and China Wafer Foundry Industry Report, 2013-2014 provides data and information on: Overview of Global Semiconductor Industry, Downstream Market of Wafer Foundry Industry, Wafer Foundry Industry, Semiconductor Industry in China as well as 13 Key Wafer Foundry Vendors. In terms of product type, foundry can be divided into two categories: Logic IC Foundry and specifically Foundry. The former is mainly comprised of high-shipment Logic IC, including CPU, GPU, Baseband, Application Processor, FPGA, APU, PLD, Networking Processor, and DTV MPU, etc. And the latter primarily consists of analog IC, mixed signals, Power IC, NVM, RF/HPA, CIS, MEMS, DDI (Display Driver). For the former, it is necessary to continuously improve manufacturing process and constantly narrow the line width, which could not only improve performance and reduce power consumption, but also reduce costs. These products update quickly, with the life cycle typically no more than three years, which requires a massive fund for developing next-generation technologies. As for the latter, however, its products have a long life cycle, with the life cycle for analog IC generally exceeding 5-10 years. And even a more than 20-year life cycle is not rare. These products can narrow line width but fail to reduce costs, and could increase costs instead. The specifically Foundry has a small market size and stable sales volume, but with low costs and high returns. In contrast, Logic IC Foundry has a large market size, but with a considerable fluctuation. Most important, only the leading player in the Logic IC Foundry industry can make profit, otherwise it is easy to make a loss. Take TSMC for example, which has taken the lead in the global market since its establishment in 1987, with its market share never less than 50%. Besides, TSMC is also the wafer foundry vendor that earns the highest profit around the globe, with the gross margin never lower than 40% even close to 50% in 2014 (exceeding Apple and Qualcomm). The No.2, No.3 and No. 4 players have ever suffered losses for many years, with SMIC, for example, making profit only in 2010 during the 12 years from 2000 to 2011. And the third player, Global Foundries, has suffered losses for years, with the revenue in 2013 showing a slight growth but the operating loss expanding from AED2.217 billion to AED3.217 billion.

Foundry vendors / companies mentioned in Global and China Wafer Foundry Industry Report, 2013-2014 include TSMC, UMC, SMIC, VIS, POWERCHIP, HHGRACE, DONGBU HITEK, TOWER, X-FAB, ASMC, SAMSUNG, MAGNACHIP and GLOBALFOUNDRIES. Order a copy of this research at http://www.chinamarketresearchreports.com/contacts/purchase.php?name=114904 .

According to the nature of the vendors, the foundry businesses can be divided into two segments, namely, IDMs offering their excess capacity to third parties and pure-play (or dedicated) foundries, with the former including Samsung, Intel, and IBM. Global Foundries can be barely included in IDMs, for it originated from AMD. These vendors have long product lines, which makes it possible to cause competition with their customers. And IDMs, in reality, are not involved in foundry businesses and could conduct foundry business only when they have excess capacity. These IDMs will not become the first choice of the customers unless special reasons.

Money and technology do not always help do well in wafer foundry industry, which has been best illustrated by IBM. Recently, IBM was willing to pay USD1 billion for the sale of its wafer foundry business to Global Foundries. And Global Foundries suggested that the payment was very small and should be expanded to USD2 billion due to the fact that the business, which generates revenue of less than USD500 million annually, caused IBM to suffer approximately USD1.5 billion loss a year. Except TSMC, most foundries have more or less bought IBM's technology, especially Samsung, STMicroelectronics, and Global Foundries, which are all technologically brought up by IBM.

Over the years, the four giants-Samsung, STMicroelectronics, Global Foundries, and IBM have formed an alliance in a vain attempt to compete against TSMC. Instead, TSMC has grown stronger and stronger. After years of efforts, Samsung has won a client in wafer foundry business-Apple. Unfortunately, the order of Apple's main products A8 was gained by TSMC in 2014, thus leading to the first loss of Samsung System LSI Division over the years.

Although Samsung's 14nm technology seems to take the lead, this is not approved by Apple. This is mainly because the four companies-Samsung, STMicroelectronics, Global Foundries, and IBM all developed from IDM. And Samsung has a long product line and therefore could compete with any electronic company in the world. Previously, Apple did not choose TSMC because the company suffered capacity constraints, and as TSMC's capacity was expanded and met Apple's requirements, Apple lost no time in making a shift from Samsung to TSMC.

Unlike IDMs such as Samsung, TSMC is pure-play foundry and will not compete with clients, which makes it easier for the company to get orders. And Samsung, STMicroelectronics, Global Foundries, IBM and Intel are the second choices for the clients.

The investment of Chinese enterprises in the field of semiconductors is totally dependent on the government, resulting in a lower efficiency. In 2010, Shanghai Huali Microelectronics Corporation was established with an investment of RMB14.5 billion. Although it had been into operation for 3 years, the company's revenue was less than RMB1.2 billion in 2013. SMIC's major clients include Spreadtrum, RDA, Hisilicon, GalaxyCore Inc., Rockchip, Allwinner Technology, GigaDevice, HED, Fudan Microelectronics, TMC, and DMT. The last few enterprises, which are mainly relied on the government orders, are the major design houses of chips for a variety of smart cards, including social security cards, ID cards, SIM cards, Union Pay cards. Therefore, 40% of SMIC's revenue came from the low-end 0.15/0.18μm technology while TSMC's revenue from lower than 65 nm technology accounted for 71% of the total.

Comprehensive table of contents with list of charts provided in Global and China Wafer Foundry Industry Report, 2013-2014 are available at http://www.chinamarketresearchreports.com/114904-toc.html .

Explore more reports on semiconductors, electronics, IT and telecommunications industry at http://www.chinamarketresearchreports.com/cat/information-technology-telecommunication.html .

About Us:    

China Market Research Reports is a database of selected syndicated market reports for global and China industries including but not limited to life sciences, information technology & telecommunications, consumer goods, food and beverages, energy and power, automotive and transportation, manufacturing and construction, materials and chemicals, public sector as well as business and financial services.

Contact:  

Ritesh Tiwari

TX, Dallas North - Dominion Plaza,
17304, Preston Road,
Suite 800, Dallas 75252

Tel:  +1-888-391-5441
[email protected]

SOURCE China Market Research Reports