Advancing Skilled Trades: Copper Development Association Supports UA Instructor Training Program in Copper Joining Techniques
OVERVIEW
- How CDA helps the United Association of Plumbers and Pipefitters (UA) educators teach copper joining methods
- Why the program focuses on preparing instructors who will train apprentices and journey-level tradespeople
- How classroom instruction and hands-on shop work are combined during the 20-hour CDA course
- How a training relationship dating back to the program's earliest years continues to support skilled trades education
MCLEAN, Va., Aug. 31, 2026 /PRNewswire/ -- The Copper Development Association Inc. (CDA) recently participated in the United Association's annual instructor training program at Washtenaw Community College in Ann Arbor, Michigan, providing a 20-hour course focused on copper tube and copper alloy joining methods, as well as identifying potential problems and troubleshooting.
The United Association (UA) represents plumbers, pipefitters, refrigeration technicians, sprinkler fitters, and related trades across more than 300 local unions in the United States and Canada. Its instructor training program prepares the educators responsible for apprenticeship and continuing education programs within those locals.
CDA's course placed particular emphasis on soldering, brazing, and other copper joining methods. Forty-three participants enrolled this year, with 22 attending the morning session and 21 attending the afternoon session.
"Education matters because the trades need people who are committed not only to developing technical skills, but also to becoming excellent educators," says Mike Belanger, Project Manager, CDA. "When we prepare instructors to return to their local training programs with strong resources and practical experience, that knowledge reaches far beyond the people in the room."
KEY FACTS
- CDA delivered a 20-hour copper tube and copper alloy joining course over five days, with separate four-hour morning and afternoon sessions.
- Forty-three UA educators enrolled in the CDA course this year.
- The annual program is designed to train instructors who teach apprentices and other tradespeople at more than 300 local unions in the United States and Canada.
- UA instructors can complete 200 hours of instruction over a five-year period as part of the organization's instructor certification process.
- CDA's training team works alongside two active UA instructors to combine classroom education with shop-based instruction.
- Participants complete 10 copper assembly modules in teams of two and are evaluated on classroom and shop participation.
- CDA's involvement traces back to the early years of the United Association training program through its predecessor organization, the Copper and Brass Research Association.
How CDA prepares educators to teach copper joining methods
The CDA course aims to prepare participants to effectively teach soldering and brazing methods upon returning to their local training programs. Participants come from various unions and have varying levels of teaching experience, ranging from established instructors to newcomers. The course offers technical instruction, teaching resources, and practical exercises for future use.
This multiplier effect is crucial, as one instructor can teach multiple classes, allowing training delivered in Ann Arbor to benefit many more through local apprenticeship and continuing education programs.
How classroom instruction and shop work come together
The CDA course combines classroom instruction and hands-on shop work, focusing on topics like copper tubing, alloys, and joining methods. Participants work in pairs to complete 10 copper module assemblies, gaining experience with common challenges in teaching apprentices.
The week ends with a teaching exercise during which volunteers act as instructors and apprentices during a copper soldering project, reinforcing the course's purpose. By the end, participants should be able to explain, demonstrate, and guide others through the process.
Why training the instructors expands the reach of skilled trades education
The United Association program has been training instructors since 1955, offering certifications, associate degree programs with an equal mix of trade-specific and professional teaching courses. Instructor certification requires 200 hours of instruction over five years. Training coordinators enhance leadership within local unions by earning certification after an additional 120 hours of instruction. The program includes an annual event in Ann Arbor, as well as regional and online courses.
"Training the trainers is what makes this program so valuable," says CDA's Mike Belanger. "These educators leave with materials, resources, and experience they can take directly back to their own trade schools. They are prepared to carry that knowledge forward."
A longstanding relationship between CDA and the United Association
CDA has a long-standing training relationship with the UA, dating back to 1955 when the Copper and Brass Research Association participated in the instructor training program. This year, three CDA representatives, including Marcus Elmer, Harold Moret, and Mike Belanger, collaborated with two instructors to deliver the copper joining course.
The program also highlights the partnership between the UA and Washtenaw Community College, which provides facilities for a wide variety of technical education and fast-track training programs. For CDA, this involvement strengthens connections to educators teaching copper installation in the skilled trades.
FREQUENTLY ASKED QUESTIONS
What is the United Association instructor training program?
The program prepares educators who teach apprentices and experienced tradespeople within United Association local unions. It includes technical courses, instructor certification, continuing education, and additional educational pathways for people who want to take on training leadership roles.
What does CDA teach during the United Association instructor training program?
CDA provides a course focused on copper tube, copper alloys, and joining methods, with particular attention to soldering and brazing. Participants receive both classroom instruction and practical shop experience.
How long is the CDA copper course at the United Association instructor training program?
The course runs for 20 hours over five days. Participants attend either a four-hour morning session or a four-hour afternoon session.
Who takes the CDA course?
The participants are United Association educators from local unions across the United States and, in some years, Canada. They range from experienced instructors to those beginning their development as trade educators. They take this course by choice, as it is an elective.
How long has CDA been involved with the United Association program?
CDA's connection to the program extends back to its predecessor organization, the Copper and Brass Research Association, which participated when the United Association program began in 1955. CDA has continued participating since 1962.
ABOUT CDA
Copper Development Association Inc's. (CDA) mission is to bring the value of copper and its alloys to society. CDA is a U.S.-based not-for-profit association of the domestic copper industry, bringing together North American copper and copper alloy semis fabricators and the global copper mining and production industries. CDA is committed to promoting the proper use of copper materials in sustainable, efficient applications for business, industry, and the home.
MEDIA CONTACT
Katie Walker
GreenHouse Digital + PR
T: 616.795.3391
E: [email protected]
SOURCE Copper Development Association
Share this article