With over 75% filler by weight, Midas Restore brings glass ceramic and zirconia together in a formulation designed around what matters in definitive restorative dentistry: strength where it counts, resistance to occlusal wear, lasting polish and natural aesthetics. The material enables dentists to produce definitive crowns, inlays, onlays and veneers through a streamlined same-visit digital workflow.
Unlike restorative materials engineered primarily around maximum strength, Midas Restore was designed around how a definitive restoration polishes, wears, flexes and functions once adhesively bonded to remaining tooth structure, while maintaining the required clinical strength.
"If we could 3D print enamel, this is it."
The statement captures the design philosophy behind Midas Restore: creating a restorative material that balances polish retention, wear resistance, strength, surface hardness, stiffness, and optical performance while working in concert with the natural tooth.
"Traditional dental 3D printing forces a compromise: the material has to be fluid enough to print, which limits how highly filled it can be," said Amir Mansouri, CEO and Founder of SprintRay. "Midas Restore was designed in our material science lab to address that limitation. By pairing a highly filled glass ceramic and zirconia formulation with Midas Digital Press, we can give clinicians access to a new class of definitive restorative materials and bring them into an efficient same-visit workflow."
Designed Around the Bonded Tooth
For decades, restorative materials have been engineered around bulk strength. Glass ceramics and zirconia are brittle, so their primary defense against crack propagation is shear strength — which in turn means more tooth reduction and stiffness well beyond what function requires.
Midas Restore takes a different approach. Its resin matrix is designed to arrest cracks rather than simply resist them, and its flexural modulus sits closer to dentin than to a glass ceramic. Once adhesively bonded to remaining tooth structure, the restoration becomes part of a system in which material and tooth distribute function together, rather than concentrating stress at the interface.
SprintRay laboratory testing demonstrated that Midas Restore retained 98% of its initial gloss after 5,000 simulated toothbrush abrasion cycles, and delivered five times the wear resistance of SprintRay Ceramic Crown over 200,000 cycles — wear performance comparable to a milled hybrid ceramic. In biaxial flexural testing, Midas Restore reached a maximum strength of 215 MPa, the highest of any SprintRay definitive restorative material.¹ The surface hardness was measured to be greater than 80 HV, statistically equivalent to a leading nanofilled direct composite and roughly double that of previous-generation printed restorative resins. Its translucency parameter of 13.5 places it in the same range as milled lithium disilicate HT.²
"We engineered Midas Restore around how a restoration actually behaves once it is bonded to a tooth, not around a single strength number," said Hossein Bassir, Chief Product Officer at SprintRay. "Filler content, polish retention, wear resistance, modulus and optics are not separate features. They are one system, and the tooth is part of it."
Made to Be Pressed
Achieving this combination of properties requires a filler loading that conventional dental 3D printing cannot process. Highly filled formulations are highly viscous, and viscous material does not flow into a print zone on its own.
SprintRay's Digital Press Stereolithography (DPS) technology actively pushes highly viscous material into the print zone from sealed capsules. That is what allows Midas to work with filler loads over 75% by weight — and it is why Midas Restore is engineered exclusively for the Midas Digital Press.
Built for Same-Visit Dentistry
Midas Restore brings definitive restorative material into a streamlined digital workflow spanning scanning and design through pressing, post-curing, polishing and bonding.
Clinicians can press multiple units from a single capsule, post-cure in four minutes, and polish restorations to final with two wheels in under two minutes — with no glaze or oven required. Midas Restore can also be adjusted, added to and repaired intraorally before adhesive cementation, supporting definitive delivery without a provisional, second appointment or lab bill.
Midas Restore builds on the Midas Digital Press platform, introduced in 2024. Since its launch, clinicians across 33 countries have produced more than 100,000 restorations with Midas. Early clinical evaluation of Midas Restore has also demonstrated straightforward finishing and polishability.
"With Midas Restore, I can achieve a beautiful, lasting surface gloss in just two or three quick polishing steps with a standard polishing system," said Andrew C. Johnson, DDS, MDS, CDT, FACP, Diplomate of the American Board of Prosthodontics and prosthodontist at OmniSmile Digital Dental Solutions, who participated in the early clinical evaluation of Midas Restore. "That combination of durability, aesthetics and straightforward finishing is what I expect as a clinician from a definitive restorative material. This is an exciting time for digital dentistry."
Availability
Midas Restore will be available beginning September 1, 2026, in the United States in shades A1, A2, A3, B1 and C2. A three-pack of Single-Unit Capsules is $135 and will be available through the SprintRay Store and authorized SprintRay distribution partners.
Midas Restore is validated for use with the SprintRay Midas Digital Press and SprintRay NanoCure. In the United States, it is FDA 510(k) cleared (K260661), Class II, Rx only.
¹ Maximum value. ISO 6872, piston-on-three-balls. Mean 180 MPa. ² Shade A1; other shades may vary.
About SprintRay
SprintRay is a dental technology company specializing in dental 3D printing and digital manufacturing solutions for dental professionals. The SprintRay ecosystem combines dental 3D printers, Digital Press technology, biocompatible dental materials, AI-powered design software and post-processing solutions to help clinicians deliver restorative, prosthetic and appliance-based care in the dental practice.
By developing hardware, software and materials as connected systems, SprintRay is working to make advanced digital dentistry and chairside manufacturing more accessible, efficient and clinically practical at the point of care. For more information, please visit www.SprintRay.com.
Media Contact
[email protected]
SOURCE SprintRay, Inc.
Share this article