EcoCycleSolutions Introduces CanCoverIt™ to Provide Easy and Effective Method for Safely Air Sealing and Insulating Homes

SAN JUAN CAPISTRANO, Calif., July 9, 2013 /PRNewswire/ -- EcoCycleSolutions, an engineering and manufacturing company focused on delivering innovative, simple solutions for challenging construction processes, announces the official launch of the CanCoverIt series of products. CanCoverIt is a uniquely shaped cover which simplifies the homeowner's and the contractor's job of safely air sealing and insulating openings between the home and the attic, such as around recessed can light fixtures, bathroom fans, speakers, etc.

The DOE estimates that there are 500 million recessed can light fixtures in US homes, with 20 million more added every year. ¹ While recessed can light fixtures are attractive to most homeowners, they create energy efficiency challenges as well as potential safety issues. CanCoverIt was designed to address both of these concerns. 

"When I started developing CanCoverIt over 2 years ago, I realized there was a lack of awareness and a great deal of confusion on how to safely seal and insulate around recessed light fixtures. As homeowners were attempting to upgrade the efficiency of their home, the lack of awareness and confusion prevented them from realizing the full benefit from their energy efficiency upgrade, and in some instances created safety issues. My goal with CanCoverIt was to make it easy and cost effective for a homeowner or a contractor to address both concerns at the same time," said Founder and President of EcoCycleSolutions, David Hanacek.

CanCoverIt is a uniquely shaped cover fabricated from FSK-faced fiberglass wallboard.  The cover is collapsible and is shipped and stored flat. The cover is popped open by hand with no assembly required. Using a simple utility knife, a few slits are made in the bottom to accommodate the rails of the can light and the wire and the cover is ready to be put in place. Spray foam or caulk can be applied around the base of the cover to seal it to the attic floor. The entire process takes seconds.

Homeowners benefit from safely making their homes more energy efficient using a solution that will last the life of their home. "How to seal and insulate can light fixtures has traditionally been a headache for contractors, or an 11th hour unanticipated detail for DIY homeowners. In both instances, CanCoverIt represents a safe, simple, cost effective solution that saves them time and money," said Hanacek.

The CanCoverIt product line currently consists of two series: 1) the low profile, for covering IC Rated recessed can lights, speakers and bathroom fan boxes and 2) the universal which as the name implies can be used in all applications including Non IC recessed can lights up to 7" diameter.

CanCoverIt is sold in individual units through Amazon and the company web site.  CanCoverIt can also be purchased individually or in full case quantities through a number of insulation distribution outlets listed on the website. To order direct or to find a list of distributors go to http://www.cancoverit.com/buynow.

¹ LED Lighting | Department of Energy.  Retrieved 2013-06-02

ABOUT ECOCYCLESOLUTIONS: EcoCycleSolutions is a San Juan Capistrano, CA based engineering and manufacturing company focused on delivering innovative, simple, easily applied technology for solving tough construction challenges.

EcoCycleSolutions Release of CanCoverIt
URL: http://www.cancoverit.com 
Facebook -  http://www.facebook.com/cancoverit 
Twitter @cancoverit

For further information contact:
EcoCycleSolutions
Mr. Stephen Crouch
Vice President, Marketing and Sales
Email 
(303) 884-3365

This press release was issued through eReleases® Press Release Distribution. For more information, visit http://www.ereleases.com.

SOURCE EcoCycleSolutions