NEW YORK, May 16, 2013 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:
Since 2011, the global tire market, especially the Chinese tire market, has seen slow growth, which directly impacts the market demand for tire molds.
In 2012, China tire mold industry harvested the revenue of RMB3.01 billion or so, including RMB1.87 billion from automotive tire molds, only up 0.16% year on year.
In terms of profitability, the performance of most Chinese tire mold manufacturers declined in 2012. During the first three quarters of 2012, Himile's revenue only increased by 0.37% year on year, and its net income fell by 6.28%. Meanwhile, the growth rate of Greatoo also slowed down, with the revenue being the same with that in the same period in 2011 and net income up by5.92%.
Among other non-listed companies, the revenue of Shandong Dawang Jintai dropped by 21.77% year on year in 2012, and that of Yuantong witnessed a year-on-year decline of 12.26%.
Seen from new construction project, there were merely two major tire mold projects in 2012: the tire mold project co-invested with a total capital of RMB1.1 billion by Henan Yasheng and Jiaozuo Deke Mould; and the 300-set radial tire mold virtual manufacturing technology project of Shandong Dawang Jintai.
In the projects invested and built before 2012, Himile's "precise radial tire mold construction project" is delayed until the end of September 2013 instead of the planned December 2012, with the investment of RMB349 million. Greatoo's "large-sized engineering vehicle tire and special tire mold expansion project" is under construction; the project aims at the mold market of military SUV tires, aerospace tires, racing tires, snow tires, high-grade sedan tires, etc, with huge market potentials. With total investment of RMB197 million; the project is expected to be put into production in July 2013.
Although the current tire mold industry is sluggish, we expect that China's domestic demand for tire molds will grow at the average annual growth rate of around 7% with the moderate recovery of Chinese automobile market in the next 2-3 years.
The report highlights the followings:
Major policies, operation, supply and demand, market competition and outlook of China tire mold industry;
Main products, operation and development planning of major producers worldwide;
Major products, capacity, operation, major customers, project planning and performance prediction of major Chinese manufacturers.
Table of Contents1. Overview of Tire Mold Industry
1.1 Definition1.2 Classification1.3 Upstream and Downstream1.4 Production Process1.5 Features
2. Development of Global Tire Mold Industry
2.1 Status Quo
2.3 Development Trend
3. Development of China Tire Mold Industry
3.1 Industry Policy3.1.1 Policies over the Years3.1.2 Expiration of Sino-US Special Protectionist Tariff on Tire Industry3.1.3 Implementation of EU Tire Label Rule3.2 Overview3.2.1 Development Course3.2.2 Operation3.2.3 Existing Problems3.3 Supply3.3.1 Capacity3.3.2 Profitability 3.4 Demand3.4.1 Overall Demand3.4.2 Demand for Radial Tire Mold 3.4.3 Export Demand3.5 Competition3.5.1 Regional Competition3.5.2 Corporate Competition3.6 Outlook
4. Global Key Enterprises
4.1 Quality Mold Inc.
4.2 A-Z Formen- und Maschinenbau GmbH
4.3 HERBERT Maschinenbau GmbH & Co. KG
4.3.2 Main Tire Mold Products
4.4 SAEHWA IMC
4.4.2 Development Course
4.4.3 Main Tire Mold Products
4.4.5 Development in China
5. Chinese Key Enterprises
5.1 Himile Mechanical Science & Technology Co., Ltd5.1.1 Profile5.1.2 Development Course5.1.3 Tire Mold Products5.1.4 Operation5.1.5 Revenue Structure5.1.6 Gross Margin5.1.7 Clients5.1.8 R & D and Projects5.1.9 Forecast and Outlook5.2 Guangdong Greatoo Molds Inc.5.2.1 Profile5.2.2 Tire Mold Product5.2.3 Operation5.2.4 Revenue Structure5.2.5 Gross Margin5.2.6 Clients5.2.7 R & D Investment5.2.8 Major Projects5.2.9 Forecast and Outlook5.3 Tianyang Mold Co., Ltd5.3.1 Profile5.3.2 Operation5.4 Shandong Dawang Jintai Group5.5 Shandong Wantong Mould Co., Ltd5.5.1 Profile5.5.2 Operation5.6 Qingdao Yuantong Machinery Co., Ltd5.7 Shandong Hongji Mechanical Technology Co., Ltd5.8 Anhui Mcgill Mould Co., Ltd5.9 Rongcheng Hongchang Mold Co., Ltd5.10 Hefei Dadao Mold Limited Liability Company5.11 Zhejiang Laifu Mould Co., Ltd
Classification of Radial Tire Segmented Molds
Upstream and Downstream of Tire Mold Industry
Comparison between Tire Mold Pattern Processing Technologies in China
Business Modes of Major Tire Mold Manufacturers in the World
Policies and Regulations on China Tire Mold Industry, 2005-2012
Development Course of China Tire Mold Industry
Revenue of Automotive Tire Molds in China, 2007-2016E
Production Cost Structure of Tire Molds in China
Capacity of Major Tire Mold Manufacturers in China, 2012
YoY Growth Rate of Revenue of Major Listed Tire Mold Companies, 2009-2012
YoY Growth Rate of Net Income of Major Listed Tire Mold Companies in China, 2009-2012
Tire Output in China, 2006-2010
Output and YoY Growth Rate of Radial Tire Covers in China, 2011-2013
Output Growth Rate of Radial Tire Covers and Automobiles in China, 2006-2013
Revenue Growth Rate of Listed Companies in Tire and Tire Mold Industries, 2006-2012
Distribution of Radial Tire Output in China, 2012
Product Comparison between Major Tire Mold Manufacturers in the World
TOP 10 Tire Mold Manufacturers by Revenue in China, 2012
Major Tire Clients of Himile in Foreign Countries
Major Tire Mold Production Bases of Quality Mold Inc.
Major Tire Pattern Designs of Quality Mold Inc
Main Tire Mold Products of AZ
Major Production Bases of HERBERT in the World
Main Tire Mold Products of HERBERT
Global Business Distribution of SAEHWA IMC
Major Production Bases of SAEHWA IMC in South Korea
Global Production Bases of SAEHWA IMC (Excluding South Korea)
Development Course of SAEHWA IMC
Product Development History of SAEHWA IMC
Main Tire Mold Products of SAEHWA IMC
Turnover of SAEHWA IMC, 2011-2012
Operating Profit and Profit of SAEHWA IMC, 2011-2012
Major Operating Indicators of SAEHWA IMC, 2010-2012
Major Operating Indicators of Shinhan Co., Ltd. Tianjin, 2008-2009
Major Operating Indicators of Saehan Tianjin Mold, 2008-2009
Medium and Long-term Development Planning of SAEHWA IMC
Development Course of Himile
Main Tire Mold Products and Applications of Himile
Tire Mold Capacity, Output and Productivity of Himile, 2008-2010
Sales Prices of Tire Molds of Himile, 2008-2010
Sales Volume and Sales-Output Ratio of Tire Molds of Himile, 2008-2010
Revenue and Net Income of Himile, 2008-2012
Revenue Breakdown of Himile (by Product), 2008-2010
Revenue Breakdown of Himile (by Product), 2011-2012
Revenue Breakdown of Himile (by Region), 2009-2012
Sales Gross Margin of Himile, 2008-2012
Tire Mold Clients of Himile
Himile's Revenue from Top 5 Clients and % of Total Revenue, 2008-2010
R&D Costs and % of Total Revenue of Himile, 2009-2012
Tire Mold Projects with Raised Funds of Himile
Revenue and Net Income of Himile, 2012-2015E
Main Tire Mold Products of Greatoo Molds
Sales Volume and Unit Price of Radial Tire Molds of Greatoo Molds Inc.
Revenue and Net Income of Greatoo Molds Inc., 2008-2012
Revenue Breakdown of Greatoo Molds Inc. (by Product), 2010-2012
Revenue Breakdown of Greatoo Molds Inc. (by Region), 2008-2012
Gross Margin of Greatoo Molds Inc., 2008-2012
Global Client Distribution of Greatoo Molds Inc.
Major Clients of Greatoo Molds Inc.
R&D Costs and % of Total Revenue of Greatoo Molds Inc., 2008-2011
Projects with Raised Funds of Greatoo Molds Inc.
Revenue and Net Income of Greatoo Molds Inc., 2012-2015E
Revenue of Tianyang Mold, 2009-2012
Major Clients of Tianyang Mold
Tire Mold Products of Shandong Wantong Mold
Revenue of Shandong Wantong Mold, 2009-2012
To order this report:Tire Industry: Global and China Tire Mold Industry Report, 2012-2015
Contact Clare: [email protected]
US:(339) 368 6001
Intl:+1 339 368 6001