Latin American Dental Prosthetics and CAD/CAM Devices Market

News provided by

May 09, 2013, 04:56 ET

NEW YORK, May 9, 2013 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:

Latin American Dental Prosthetics and CAD/CAM Devices Market

http://www.reportlinker.com/p01171721/Latin-American-Dental-Prosthetics-and-CAD/CAM-Devices-Market.html#utm_source=prnewswire&utm_medium=pr&utm_campaign=Dental_Equipment

In 2012, the total Latin American dental prosthetics market increased by 10.9% over 2011. High
growth is expected to continue over the forecast period.

The Latin American market includes Mexico, Brazil and Argentina. Over the past few years the popularity of implants has driven demand for prosthetics over implant restorations. In addition to the popularity of implants, the population in both Argentina and Brazil is aging, and more patients are in need of dental treatment. Latin Americans place a high value on cosmetics and aesthetics, and are unlikely to bypass prosthetic treatment when necessary.

Scope:

This report pertains to a forecast period of 10 years (2009 - 2019) for Brazil, Argentina and Mexico.

Report Contents:

• Competitor Analysis
• Identified Strategic Opportunities
• Market Overview by Segment & Country
• Trend Analysis by Segment & Country
• Market Drivers & Limiters
• Mergers & Acquisitions
• Customer Feedback and Market Monitoring

Main Segments Included:

• Crowns and Bridges (Full Cast, All-Ceramic, PFM Non-Precious Alloy, PFM Semi-Precious Alloy, PFM Precious Alloy, Gold, Ceramo-Metal, Composite Resin, Ceramic)
• Inlays and Onlays
• Veneers
• Dentures (Full, Partial, Acrylic, Porcelain, Composite Resin)
• Manufacturing Process and Technological Developments
• CAD/CAM Systems (Full In-Lab, Standalone Scanner, Chairside)
• CAD/CAM Blocks and Prosthetic Devices (Zirconia, Porcelain, crylic/Composite

Companies Included:

VIPI
VITA
Ivoclar Vivadent
DENTSPLY
Hereaus Kulzer
New Stetic
O'Dent S.R.L Tecnologia Dental
Zirkonzahn
3M ESPE

Reasons To Buy:

This report analyzes and evaluates the current state of the market including existing and potential markets, product average selling prices, and unit volumes. The report also highlights the opportunities and potential hazards involved, and presents strategies for successfully navigating the market landscape. Furthermore, it seeks to identify the trends and technologies that will affect the future of each market segment and prepares an unbiased critical assessment of such market drivers and limiters based on our "bottom up" approach, which includes primary and secondary research methods.

TABLE OF CONTENTS I

LIST OF FIGURES X

LIST OF CHARTS XVI

EXECUTIVE SUMMARY 1

1.1 TOTAL LATIN AMERICAN DENTAL PROSTHETICS MARKET 1
1.2 TREND ANALYSIS BY COUNTY 2
1.3 CROWN AND BRIDGE MARKET 3
1.4 INLAY AND ONLAY MARKET 4
1.5 DENTURE MARKET 5
1.6 CAD/CAM SYSTEM MARKET 6
1.7 CAD/CAM BLOCKS AND PROSTHETICS MARKET 7
1.8 COMPETITIVE ANALYSIS 8
1.8.1 Leading Competitors, Dental Prosthetics 8
1.8.2 Leading Competitors, CAD/CAM System Market 9

RESEARCH METHODOLOGY 10

2.1 RESEARCH SCOPE 10
Step 1: Project Initiation & Team Selection 11
Step 2: Prepare Data Systems and Perform Secondary Research 13
Step 3: Preparation for Interviews & Questionnaire Design 14
Step 4: Performing Primary Research 15
Step 5: Research Analysis: Establishing Baseline Estimates 17
Step 6: Market Forecast and Analysis 18
Step 7: Identify Strategic Opportunities 20
Step 8: Final Review and Market Release 21

LATIN AMERICAN DENTAL PROSTHETICS AND CAD/CAM SYSTEM MARKET 22

3.1 INTRODUCTION 22
3.1.1 Crowns and Bridges 22
3.1.1.1 Material Types 23
3.1.2 Inlays and Onlays 24
3.1.3 Material Types 25
3.1.4 Dentures 26
3.1.4.1 Full Dentures 26
3.1.4.2 Partial Dentures 26
3.1.5 Manufacturing Process and Technological Developments 27
3.1.5.1 Conventional Fabrication 27
3.1.5.2 CAD/CAM Technology 27
3.2 CURRENCY EXCHANGE RATE 30
3.3MARKET OVERVIEW 31
3.4MARKET BY SEGMENT 34
3.4.1 Unit Analysis 34
3.5 TREND ANALYSIS BY SEGMENT 37
3.6MARKET BY COUNTRY 39
3.7MARKET DRIVERS AND LIMITERS 45
3.7.1 Market Drivers 45
3.7.2 Market Limiters 46
3.8 COMPETITIVE ANALYSIS 47
3.8.1.1 Mexican Laboratories 47
3.8.1.2 Brazilian Laboratories 47
3.8.1.3 Argentinean Laboratories 47
3.9 DENTAL LABORATORY INDUSTRY 48
3.9.1.1 Mexico 48
3.9.1.2 Brazil 48
3.9.1.3 Argentina 49
3.10MERGERS AND ACQUISITIONS 50

COUNTRY PROFILES 52

4.1 INTRODUCTION 52
4.1.1 Population 52
4.1.2 GDP per Capita 54
4.1.3 Price Indices for Dental Prosthetics 56
4.2 LATIN AMERICAN DENTAL PROSTHETICS PER CAPITA SUMMARY 58
4.2.1 Dental Prosthetic Treatment per 10,000 Inhabitants 58
4.3MEXICO 60
4.4 BRAZIL 61
4.5 ARGENTINA 62

MEXICAN DENTAL PROSTHETICS AND CAD/CAM SYSTEM MARKET 6

5.1 INTRODUCTION 63
5.2MARKET OVERVIEW 64
5.3MARKET BY SEGMENT 67
5.3.1 Unit Analysis 67
5.4 TREND ANALYSIS BY SEGMENT 70
5.5MARKET OVERVIEW: CROWN AND BRIDGE MARKET 72
5.6MARKET ANALYSIS AND FORECAST: CROWN AND BRIDGE MARKET 75
5.6.1 Total Crown and Bridge Market 75
5.6.2 Crown Market 77
5.6.3 Bridge Market 79
5.7MARKET BY MATERIAL TYPE: CROWN AND BRIDGE MARKET 81
5.7.1 Full-Cast Crown and Bridge Market 85
5.7.1.1 Total Full-Cast Crown and Bridge Market 85
5.7.1.2 Full-Cast Crown Market 87
5.7.1.3 Full-Cast Bridge Market 87
5.7.2 All-Ceramic Crown and Bridge Market 90
5.7.2.1 Total All-Ceramic Crown and Bridge Market 90
5.7.2.2 All-Ceramic Crown Market 92
5.7.2.3 All-Ceramic Bridge Market 92
5.7.3 PFM Non-Precious Alloy Crown and Bridge Market 95
5.7.3.1 Total PFM Non-Precious Alloy Crown and Bridge Market 95
5.7.3.2 PFM Non-Precious Alloy Crown Market 97
5.7.3.3 PFM Non-Precious Alloy Bridge Market 97
5.7.4 PFM Semi-Precious Alloy Crown and Bridge Market 100
5.7.4.1 Total PFM Semi-Precious Alloy Crown and Bridge Market 100
5.7.4.2 PFM Semi-Precious Alloy Crown Market 102
5.7.4.3 PFM Semi-Precious Alloy Bridge Market 102
5.7.5 PFM Precious Alloy Crown and Bridge Market 105
5.7.5.1 Total PFM Precious Alloy Crown and Bridge Market 105
5.7.5.2 PFM Precious Alloy Crown Market 107
5.7.5.3 PFM Precious alloy Bridge Market 107
5.8MARKET DRIVERS AND LIMITERS: CROWN AND BRIDGE MARKET 110
5.8.1 Market Drivers 110
5.8.2 Market Limiters 111
5.9MARKET ANALYSIS AND FORECAST: INLAY AND ONLAY MARKET 113
5.10MARKET BY MATERIAL TYPE 115
5.10.1 Gold 115
5.10.2 Ceramo-Metal 115
5.10.3 Ceramic 115
5.10.4 Composite Resin 116
5.11MARKET DRIVERS AND LIMITERS: INLAY AND ONLAY MARKET 120
5.11.1 Market Drivers 120
5.11.2 Market Limiters 121
5.12MARKET ANALYSIS AND FORECAST: DENTURE AND DENTURE TEETH MARKET 123
5.12.1 Denture Market 123
5.12.2 Denture Market by Type 125
5.12.2.1 Full Dentures 125
5.12.2.2 Partial Dentures 125
5.12.3 Denture False Teeth Market 128
5.12.4 Denture False Teeth by Material Type 130
5.12.4.1 Acrylic 130
5.12.4.2 Porcelain 130
5.12.4.3 Composite Resin 130
5.13MARKET DRIVERS AND LIMITERS: DENTURE AND DENTURE TEETH MARKET 133
5.13.1 Market Drivers 133
5.13.2 Market Limiters 134
5.14 COMPETITIVE ANALYSIS: DENTAL LABORATORIES 135
5.15 COMPETITIVE ANALYSIS: DENTURE TEETH MARKET 138
5.16MARKET OVERVIEW: CAD/CAMSYSTEM MARKET 140
5.17MARKET ANALYSIS AND FORECAST: CAD/CAMSYSTEM MARKET 143
5.17.1 Full In-Lab CAD/CAM System Market 143
5.17.2 Standalone Scanner CAD/CAM System Market 146
5.17.3 Chairside CAD/CAM System Market 149
5.18MARKET DRIVERS AND LIMITERS: CAD/CAMSYSTEM MARKET 152
5.18.1 Market Drivers 152
5.18.2 Market Limiters 153
5.19 COMPETITIVE ANALYSIS: CAD/CAMSYSTEM MARKET 156
5.20MARKET ANALYSIS AND FORECAST: CAD/CAMBLOCK AND PROSTHETICS MARKET 159
5.20.1 CAD/CAM Block Market 159
5.20.2 CAD/CAM Block Market by Material Type 161
5.20.2.1 Zirconia 161
5.20.2.2 Porcelain 161
5.20.2.3 Acrylic/Composite 161
5.20.3 CAD/CAM Prosthetics Device Market 163
5.20.3.1 Total CAD/CAM Prosthetics Device Market 163
5.20.3.2 Chairside CAD/CAM Prosthetics Device Market 165
5.20.3.3 Full In-Lab CAD/CAM Prosthetics Device Market 167
5.20.3.4 Ratio of CAD/CAM Blocks to CAD/CAM Prosthetics 169
5.20.3.5 Penetration Rate, CAD/CAM Prosthetics Market 170
5.21MARKET DRIVERS AND LIMITERS: CAD/CAMBLOCKS AND PROSTHETICS MARKET 172
5.21.1 Market Drivers 172
5.21.2 Market Limiters 172
5.22 COMPETITIVE ANALYSIS: CAD/CAMBLOCK AND PROSTHETIC MARKET 174

BRAZILIAN DENTAL PROSTHETICS AND CAD/CAM SYSTEM MARKET 175

6.1 INTRODUCTION 175
6.2MARKET OVERVIEW 176
6.3MARKET BY SEGMENT 179
6.3.1 Unit Analysis 179
6.4 TREND ANALYSIS BY SEGMENT 182
6.5MARKET OVERVIEW: CROWN AND BRIDGE MARKET 184
6.6MARKET ANALYSIS AND FORECAST: CROWN AND BRIDGE MARKET 187
6.6.1 Total Crown and Bridge Market 187
6.6.2 Crown Market 189
6.6.3 Bridge Market 191
6.7MARKET BY MATERIAL TYPE: CROWN AND BRIDGE MARKET 193
6.7.1 Full-Cast Crown and Bridge Market 197
6.7.1.1 Total Full-Cast Crown and Bridge Market 197
6.7.1.2 Full-Cast Crown Market 199
6.7.1.3 Full-Cast Bridge Market 199
6.7.2 All-Ceramic Crown and Bridge Market 202
6.7.2.1 Total All-Ceramic Crown and Bridge Market 202
6.7.2.2 All-Ceramic Crown Market 204
6.7.2.3 All-Ceramic Bridge Market 204
6.7.3 PFM Non-Precious Alloy Crown and Bridge Market 207
6.7.3.1 Total PFM Non-Precious Alloy Crown and Bridge Market 207
6.7.3.2 PFM Non-Precious Alloy Crown Market 209
6.7.3.3 PFM Non-Precious Alloy Bridge Market 209
6.7.4 PFM Semi-Precious Alloy Crown and Bridge Market 212
6.7.4.1 Total PFM Semi-Precious Alloy Crown and Bridge Market 212
6.7.4.2 PFM Semi-Precious Alloy Crown Market 214
6.7.4.3 PFM Semi-Precious Alloy Bridge Market 214
6.7.5 PFM Precious Alloy Crown and Bridge Market 217
6.7.5.1 Total PFM Precious Alloy Crown and Bridge Market 217
6.7.5.2 PFM Precious Alloy Crown Market 219
6.7.5.3 PFM Precious Alloy Bridge Market 219
6.8MARKET DRIVERS AND LIMITERS: CROWN AND BRIDGE MARKET 222
6.8.1 Market Drivers 222
6.8.2 Market Limiters 224
6.9MARKET ANALYSIS AND FORECAST: INLAY AND ONLAY MARKET 226
6.10MARKET BY MATERIAL TYPE: INLAY AND ONLAY MARKET 228
6.10.1 Gold 228
6.10.2 Full-Cast 228
6.10.3 All-Ceramic 228
6.10.4 Composite Resin 228
6.11MARKET DRIVERS AND LIMITERS: INLAY AND ONLAY MARKET 232
6.11.1 Market Drivers 232
6.11.2 Market Limiters 233
6.12MARKET ANALYSIS AND FORECAST: DENTURE AND DENTURE TEETH MARKET 234
6.12.1 Denture Market 234
6.12.2 Denture Market by Type 236
6.12.2.1 Full Dentures 236
6.12.2.2 Partial Dentures 236
6.12.3 Denture False Teeth Market 239
6.12.4 Denture False Teeth by Material Type 241
6.12.4.1 Acrylic 241
6.12.4.2 Porcelain 241
6.12.4.3 Composite Resin 241
6.13MARKET DRIVERS AND LIMITERS: DENTURE AND DENTURE TEETH MARKET 244
6.13.1 Market Drivers 244
6.13.2 Market Limiters 245
6.14 COMPETITIVE ANALYSIS: DENTAL LABORATORIES 247
6.15 COMPETITIVE ANALYSIS: DENTURE TEETH MARKET 248
6.16MARKET OVERVIEW: CAD/CAMSYSTEM MARKET 250
6.17MARKET ANALYSIS AND FORECAST: CAD/CAMSYSTEM MARKET 253
6.17.1 Full In-Lab CAD/CAM System Market 253
6.17.2 Standalone Scanner CAD/CAM System Market 255
6.17.3 Chairside CAD/CAM System Market 257
6.18 COMPETITIVE ANALYSIS: CAD/CAMSYSTEM MARKET 259
6.19MARKET DRIVERS AND LIMITERS: CAD/CAMSYSTEM MARKET 265
6.19.1 Market Drivers 265
6.19.2 Market Limiters 266
6.20MARKET ANALYSIS AND FORECAST: CAD/CAMBLOCK AND PROSTHETICS MARKET 268
6.20.1 CAD/CAM Block Market 268
6.20.2 CAD/CAM Block Market by Material Type 270
6.20.2.1 Zirconia 270
6.20.2.2 Porcelain 270
6.20.2.3 Acrylic/Composite 270
6.20.3 CAD/CAM Prosthetics Device Market 272
6.20.3.1 Total CAD/CAM Prosthetics Device Market 272
6.20.3.2 Chairside CAD/CAM Prosthetics Device Market 274
6.20.3.3 Full In-Lab CAD/CAM Prosthetics Device Market 276
6.20.3.4 Ratio of CAD/CAM Blocks to CAD/CAM Prosthetics 278
6.20.3.5 Penetration Rate, CAD/CAM Prosthetics Market 279
6.21MARKET DRIVERS AND LIMITERS: CAD/CAMBLOCK AND PROSTHETICS MARKET 281
6.21.1 Market Drivers 281
6.21.2 Market Limiters 281
6.22 COMPETITIVE ANALYSIS: CAD/CAMBLOCK AND PROSTHETICS MARKET 283

ARGENTINEAN DENTAL PROSTHETICS AND CAD/CAM SYSTEM MARKET 286

7.1 INTRODUCTION 286
7.2 ARGENTINEAN ECONOMY AND POLITICS 287
7.3MARKET OVERVIEW 288
7.4MARKET BY SEGMENT 291
7.4.1 Unit Analysis 291
7.5 TREND ANALYSIS BY SEGMENT 294
7.6MARKET OVERVIEW: CROWN AND BRIDGE MARKET 296
7.7MARKET ANALYSIS AND FORECAST: CROWN AND BRIDGE MARKET 299
7.7.1 Total Crown and Bridge Market 299
7.7.2 Crown Market 301
7.7.3 Bridge Market 303
7.8MARKET BY MATERIAL TYPE: CROWN AND BRIDGE MARKET 305
7.8.1 Full-Cast Crown and Bridge Market 309
7.8.1.1 Total Full-Cast Crown and Bridge Market 309
7.8.1.2 Full-Cast Crown Market 311
7.8.1.3 Full-Cast Bridge Market 311
7.8.2 All-Ceramic Crown and Bridge Market 314
7.8.2.1 Total All-Ceramic Crown and Bridge Market 314
7.8.2.2 All-Ceramic Crown Market 316
7.8.2.3 All-Ceramic Bridge Market 316
7.8.3 PFM Non-Precious Alloy Crown and Bridge Market 319
7.8.3.1 Total PFM Non-Precious Alloy Crown and Bridge Market 319
7.8.3.2 PFM Non-Precious Alloy Crown Market 321
7.8.3.3 PFM Non-Precious Alloy Bridge Market 321
7.8.4 PFM Semi-Precious Alloy Crown and Bridge Market 324
7.8.4.1 Total PFM Semi-Precious Alloy Crown and Bridge Market 324
7.8.4.2 PFM Semi-Precious Alloy Crown Market 326
7.8.4.3 PFM Semi-Precious Alloy Bridge Market 326
7.8.5 PFM Precious Alloy Crown and Bridge Market 329
7.8.5.1 Total PFM Precious Alloy Crown and Bridge Market 329
7.8.5.2 PFM Precious Alloy Crown Market 331
7.8.5.3 PFM Precious Alloy Bridge Market 331
7.9MARKET DRIVERS AND LIMITERS: CROWNS AND BRIDGES 334
7.9.1 Market Drivers 334
7.9.2 Market Limiters 334
7.10MARKET ANALYSIS AND FORECAST: INLAY AND ONLAY MARKET 336
7.11MARKET BY MATERIAL TYPE: INLAY AND ONLAY MARKET 338
7.11.1 Gold 338
7.11.2 Full-Cast 338
7.11.3 Ceramic 338
7.11.4 Composite Resin 339
7.12MARKET DRIVERS AND LIMITERS: INLAY AND ONLAY MARKET 342
7.12.1 Market Drivers 342
7.12.2 Market Limiters 342
7.13MARKET ANALYSIS AND FORECAST: DENTURE AND DENTURE TEETH MARKET 343
7.13.1 Denture Market 343
7.13.2 Denture Market by Type 345
7.13.2.1 Full Dentures 345
7.13.2.2 Partial Dentures 345
7.13.3 Denture False Teeth Market 348
7.13.4 Denture False Teeth Market by Material Type 350
7.13.4.1 Acrylic 350
7.13.4.2 Porcelain 350
7.13.4.3 Composite Resin 350
7.14MARKET DRIVERS AND LIMITERS: DENTURE AND DENTURE TEETH MARKET 353
7.14.1 Market Drivers 353
7.14.2 Market Limiters 353
7.15 COMPETITIVE ANALYSIS: DENTURE TEETH MARKET 355
7.16MARKET OVERVIEW: CAD/CAMSYSTEM MARKET 358
7.16.1.1 All-Ceramic Restorations 358
7.16.1.2 Laboratory Environment 358
7.16.1.3 Cost of Equipment 359
7.16.1.4 Import Restrictions 359
7.16.1.5 Currency Controls 360
7.16.1.6 Market Analysis 360
7.16.1.7 Current Competitors 360

ABBREVIATIONS 362