Middle East and Africa $3.9Bn Compressor Markets, 2023 - Opportunities in Exploration for Natural Gas & Growing Food and Beverage Industry
DUBLIN, July 19, 2019 /PRNewswire/ -- The "Middle East and Africa (MEA) Compressor Market (2013-2023)" report has been added to ResearchAndMarkets.com's offering.
The Middle East and Africa (MEA) compressor market is predicted to generate $3.9 billion in revenue by 2023.
During the historical period, the market declined by 0.2%, most significantly during 2014-2015. The fall in oil prices, which had affected a large number of industries, was the primary reason behind the market regress. However, the demand for compressors in the region is expected to grow during the forecast period because of an expected recovery in the regional economy in 2019. Furthermore, the packaging sector in the Middle East is anticipated to grow, increasing the demand for compressors.
On the basis of type, the Middle East and Africa compressor market has been subdivided into dynamic compressors and positive displacement compressors. Out of these, positive displacement compressors held the larger revenue share in 2017, resulting from their widespread usage in the automotive industry. Geographically, the North African region is one of the largest automotive markets in MEA. Original equipment manufacturers are setting up production facilities in countries, including Morocco, Algeria, Egypt, and Tunisia, due to the rapid urbanization, rising disposable income, and improvement in infrastructure here.
Now, the positive displacement category has been further classified into reciprocating and rotary. Among the two, rotary compressors held the major revenue share in the MEA compressor market in 2017. These compressors are used in a range of applications, including industrial production and power generation. Major countries, such as Saudi Arabia, the U.A.E., and Iran, are implementing policies to minimize their dependency on gas and crude oil production and boost the development of their industrial and power infrastructure.
The construction industry in MEA is estimated to witness a CAGR of 7.2% during 2018-2023. Compressors are installed in the air-operated machinery which is used at construction sites; therefore, the increasing number of construction projects is strongly influencing the growth of the Middle East and Africa compressor market. Saudi Vision 2030 is aimed at reducing Saudi Arabia's dependence on oil and increase investments in sectors, including health, education, tourism, and infrastructure. Under this vision, the 26,500-sq. km under-construction Neom project, backed by a $500 million investment, is slated to be completed by 2025.
Further, the IAAF World Athletic Championship is to be held in Qatar in 2019, and the FIFA World Cup 2022 will also take place in the country, for which the Al-Wakrah stadium is being constructed in Doha with an investment of $575 million. Thus, the expanding construction sector will drive the demand for compressors in the region.
The major MEA compressor market players are engaged in an intense competition to provide customers with cost-effective, optimum-quality, and technologically advanced products.
Currently, the key players include IDEX Corporation, Colfax Corporation, Man SE, Kaeser Kompressoren SE, Mitsubishi Heavy Industries Ltd., Atlas Copco AB, ANEST IWATA Corporation, MAHLE GmbH, Valeo SA, and Toyota Industries Corporation.
Key Topics Covered:
Chapter 1. Research Background
1.1 Research Objectives
1.2 Market Definition
1.3 Research Scope
1.4 Key Stakeholders
Chapter 2. Research Methodology
2.1 Secondary Research
2.2 Primary Research
2.2.1 Breakdown of Primary Research Respondents
2.2.1.1 By Country
2.2.1.2 By industry participant
2.2.1.3 By company type
2.3 Market Size Estimation
2.4 Data Triangulation
2.5 Assumptions for the Study
Chapter 3. Executive Summary
Chapter 4. Introduction
4.1 Definition of Market Segments
4.1.1 By Type
4.1.1.1 Positive Displacement
4.1.1.1.1 Reciprocating
4.1.1.1.1.1 In-line
4.1.1.1.1.2 V Shaped
4.1.1.1.1.3 Tandem Piston
4.1.1.1.1.4 Single-acting
4.1.1.1.1.5 Double-acting
4.1.1.1.1.6 Diaphragm
4.1.1.1.2 Rotary
4.1.1.1.2.1 Screw
4.1.1.1.2.2 Vane
4.1.1.1.2.3 Lobe and Scroll
4.1.1.2 Dynamic
4.1.1.2.1 Centrifugal
4.1.1.2.2 Axial
4.1.2 By Lubrication Type
4.1.2.1 Oil-free
4.1.2.2 Oil-flooded
4.1.3 By Portability
4.1.3.1 Portable
4.1.3.2 Stationary
4.1.4 By Pressure
4.1.4.1 Ultra-low-pressure
4.1.4.2 Low-pressure
4.1.4.3 Medium-pressure
4.1.4.4 High-pressure
4.1.4.5 Hyper-pressure
4.1.5 By Application
4.1.5.1 Construction
4.1.5.2 Power
4.1.5.3 Industrial Manufacturing
4.1.5.4 HVAC-R
4.1.5.5 Chemical and Cement
4.1.5.6 Oil and Gas
4.1.5.7 Automotive
4.1.5.8 Food and Beverage
4.1.5.9 Textile
4.1.5.10 Others
4.2 Value Chain Analysis
4.3 Market Dynamics
4.3.1 Trends
4.3.1.1 Increased use of Rotary Compressors
4.3.1.2 Use of Variable Frequency Drive (VFD) for compressors over gas turbines
4.3.2 Drivers
4.3.2.1 Growing demand for compressors in oil and gas industry
4.3.2.2 Growing construction market in MEA region
4.3.2.3 Growth in MEA HVAC market
4.3.3 Restraints
4.3.3.1 Volatility in Oil prices
4.3.3.2 High Initial Cost
4.3.4 Opportunities
4.3.4.1 Exploration for Natural Gas
4.3.4.2 Growing food and beverage industry
4.4 Porter's Five Forces Analysis
Chapter 5. MEA Market Size and Forecast
5.1 By Type
5.1.1 Positive displacement, by Type
5.1.1.1 Positive displacement, by Reciprocating Type
5.1.1.2 Positive displacement, by Rotary Type
5.1.2 Dynamic, by Type
5.2 By Lubrication Type
5.3 By Portability
5.4 By Pressure
5.5 By Application
5.6 By Country
Chapter 6. Saudi Arabia Market Size and Forecast
Chapter 7. U.A.E. Market Size and Forecast
Chapter 8. Turkey Market Size and Forecast
Chapter 9. South Africa Market Size and Forecast
Chapter 10. Sudan Market Size and Forecast
Chapter 11. Rest of MEA Market Size and Forecast
11.1 By Type
11.1.1 Positive displacement, by Type
11.1.1.1 Positive displacement, by Reciprocating Type
11.1.1.2 Positive displacement, by Rotary Type
11.1.2 Dynamic, by Type
11.2 By Lubrication Type
11.3 By Portability
11.4 By Pressure
11.5 By Application
Chapter 12. Competitive Landscape
12.1 Market Share Analysis of Key Players
12.2 Competitive Benchmarking of Key Players
12.3 Recent Activities of Major Players
12.4 Strategic Developments of Key Players
12.4.1 Mergers and Acquisitions
12.4.2 Product Launches
12.4.3 Client Wins
12.4.4 Facility Expansions
Chapter 13. Company Profiles
- General Electric Company
- IDEX Corporation
- Flowserve Corporation
- Colfax Corporation
- Burckhardt Compression Holding AG
- Man SE
- Gardner Denver Holdings Inc.
- Kaeser Kompressoren SE
- Ingersoll-Rand plc
- Mitsubishi Heavy Industries Ltd.
- Accudyne Industries LLC
- Atlas Copco AB
- Kobe Steel, Ltd.
- ANEST IWATA Corporation
- Zhe Jiang Hongwuhuan Machinery Co., Ltd
- MAHLE GmbH
- Sanden Holdings Corporation
- Valeo SA
- Hanon Systems
- Toyota Industries Corporation
For more information about this report visit https://www.researchandmarkets.com/r/2zndv8
Research and Markets also offers Custom Research services providing focused, comprehensive and tailored research.
Media Contact:
Research and Markets
Laura Wood, Senior Manager
[email protected]
For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900
U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716
SOURCE Research and Markets
Share this article