Reportlinker Adds French Market for Dental Prosthetics and CAD/CAM Devices 2011

Mar 09, 2011, 11:59 ET from Reportlinker

NEW YORK, March 9, 2011 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:

French Market for Dental Prosthetics and CAD/CAM Devices 2011

http://www.reportlinker.com/p0164113/French-Market-for--Dental-Prosthetics-and-CAD/CAM-Devices-2011.html

France is the second largest country in the European Union. In 2010, the French market for dental prosthetics was the fourth largest in Europe, The market is similar to other western European markets, as the crown and bridge market is near 100% saturation, and the only growth in procedures comes from increases in population, as well as an aging population.

This report also includes the following market segments:

- Crown and Bridge Market

- Denture Market

- CAD/CAM System Market

- CAD/CAM Block and Prosthetic Market

The aging population and demand for superior dental aesthetics are driving the prosthetics market. The global economic recession of 2008 and 2009 resulted in a slowdown in total market growth; however, the market began to recover in 2010 and is expected to experience accelerating growth by 2017. CAD/CAM manufactured prosthetics are expected to represent the fastest growing segment while the CAD/CAM system market will exhibit high unit growth rates over the forecast period.

This report provides a comprehensive and detailed analysis of market revenues by device type, market forecasts through 2017, unit sales, average selling prices, market drivers and limiters and a detailed competitive analysis, including manufacturer market shares and product portfolios.

TABLE OF CONTENTS

TABLE OF CONTENTS.I

LIST OF FIGURES.IV

LIST OF CHARTSVI

EXECUTIVE SUMMARY. 1

1.1 TOTAL EUROPEAN DENTAL PROSTHETICS MARKETS 1

1.2 CAD/CAM PROSTHETICS MARKETS 2

1.3 DENTAL STATISTICS . 3

1.4 TREND ANALYSIS BY COUNTRY. 4

1.5 TREND ANALYSIS BY SEGMENT . 5

1.6 CROWN AND BRIDGE MARKET. 6

1.7 DENTURE MARKET . 7

1.8 CAD/CAM SYSTEM MARKET 8

1.9 FULL IN-LAB CAD/CAMSYSTEMS . 9

1.10 STANDALONE SCANNER MARKET 10

1.11 CHAIRSIDE SYSTEM MARKET. 11

1.12 COMPETITIVE ANALYSIS 12

RESEARCH METHODOLOGY. 13

2.1 RESEARCH SCOPE . 13

2.2 IDATA'S 9-STEP METHODOLOGY . 13

Step 1: Project Initiation & Team Selection . 14

Step 2: Prepare Data Systems and Perform Secondary Research 15

Step 3: Preparation for Interviews & Questionnaire Design . 16

Step 4: Performing Primary Research 17

Step 5: Research Analysis: Establishing Baseline Estimates . 19

Step 6: Market Forecast and Analysis 19

Step 7: Identify Strategic Opportunities . 21

Step 8: Final Review and Market Release 22

Step 9: Customer Feedback and Market Monitoring 23

FRENCH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS 24

3.1 INTRODUCTION . 24

3.2MARKET ANALYSIS AND FORECAST 26

3.2.1 Total Dental Prosthetics Market. 26

3.2.2 Crown and Bridge Market 30

3.2.2.1 Porcelain-Fused Metal Market36

3.2.2.2 Full-Cast Market .39

3.2.2.3 All-Ceramic Market .41

3.2.3 CAD/CAM Prosthetics Market . 43

3.2.3.1 Chairside CAD/CAM Prosthetics 45

3.2.3.2 In-Lab CAD/CAM Prosthetics Market 47

3.2.4 Denture Market. 49

3.2.4.1 Full Denture Market 53

3.2.4.2 Partial Denture Market .53

3.2.5 CAD/CAM System Market 55

3.2.5.1 Full In-Lab CAD/CAM Systems.58

3.2.5.2 Standalone Scanners62

3.2.5.3 Chairside Systems66

3.3MARKET DRIVERS AND LIMITERS 69

3.3.1 Total Dental Prosthetic Device Market 69

3.3.1.1 Market Drivers.69

3.3.1.2 Market Limiters .70

3.3.2 Crown and Bridge Market 71

3.3.2.1 Market Drivers.71

3.3.2.2 Market Limiters .73

3.3.3 Denture Market. 74

3.3.3.1 Market Drivers.74

3.3.3.2 Market Limiters .75

3.3.4 CAD/CAM System Market 75

3.3.4.1 Market Drivers.75

3.3.4.2 Market Limiters .76

3.4 COMPETITIVE ANALYSIS 79

3.4.1 Total CAD/CAM System Market 79

3.4.1.1 Full In-Lab CAD/CAM Systems.83

3.4.1.2 Standalone Scanners85

3.4.1.3 Chairside Systems87

ABBREVIATIONS 88

LIST OF FIGURES

EXECUTIVE SUMMARY 1

RESEARCH METHODOLOGY 13

FRENCH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS24

Figure 7-1: Dental Prosthetics Market, France, 2007 – 2017 (€) 27

Figure 7-2: Dental Prosthetics Market, France, 2007 – 2017 (US$) 28

Figure 7-3: Crown and Bridge Market, France, 2007 – 2017 (€) 31

Figure 7-4: Crown and Bridge market, France, 2007 – 2017 (US$) 31

Figure 7-5: Crown and Bridge Market by Material Type, France, 2007 – 2017. 33

Figure 7-6: PFM Device Market, France, 2007 – 2017 (€) . 37

Figure 7-7: PFM Device Market, France, 2007 – 2017 (US$) 37

Figure 7-8: Full-Cast Device Market, France, 2007 – 2017 (€) 40

Figure 7-9: Full-Cast Device Market, France, 2007 – 2017 (US$) 40

Figure 7-10: All-Ceramic Device Market, France, 2007 – 2017 (€) 42

Figure 7-11: All-Ceramic Device Market, France, 2007 – 2017 (US$) . 42

Figure 7-12: CAD/CAM Prosthetics Market, France, 2007 – 2017 (€) . 44

Figure 7-13: CAD/CAM Prosthetics Market, France, 2007 – 2017 (US$) . 44

Figure 7-14: Chairside CAD/CAM Prosthetics Market, France, 2007–2017 (€) 46

Figure 7-15: Chairside CAD/CAM Prosthetics Market, France, 2007–2017 (US$) 46

Figure 7-16: In-Lab CAD/CAM Prosthetics Market, France, 2007–2017 (€) 48

Figure 7-17: In-Lab CAD/CAM Prosthetics Market, France, 2007-2017 (US$) 48

Figure 7-18: Denture Market by Type, France, 2007 – 2017 50

Figure 7-19: Denture Market, France, 2007 – 2017 (€) 51

Figure 7-20: Denture Market, France, 2007 – 2017 (US$) . 51

Figure 7-21: Denture Market by Type, France, 2007 – 2017 54

Figure 7-22: CAD/CAM System Market, France, 2007 – 2017 (€ and US$) . 56

Figure 7-23: Full In-Lab CAD/CAM System Market, France, 2007 – 2017 (€) . 60

Figure 7-24: Full In-Lab CAD/CAM System Market, France, 2007 – 2017 (US$) 60

Figure 7-25: Standalone Scanner In-Lab CAD/CAM System Market, France, 2007

– 2017 (€) 64

Figure 7-26: Standalone Scanner In-Lab CAD/CAM System Market, France, 2007

– 2017 (US$) . 64

Figure 7-27: Chairside CAD/CAM System Market, France, 2007 – 2017 (€) 67

Figure 7-28: Chairside CAD/CAM System Market, France, 2007 – 2017 (US$) . 67

Figure 7-29: Market Drivers and Limiters, Dental Prosthetics Market, France,

2010 71

Figure 7-30: Market Drivers and Limiters, Crown and Bridge Market, France,

2010 74

Figure 7-31: Market Drivers and Limiters, Denture Market, France, 2010 75

Figure 7-32: Market Drivers and Limiters, CAD/CAM System Market, 2010 . 78

Figure 7-33: Leading Competitors, CAD/CAM System Market, France, 2010 81

Figure 7-34: Leading Competitors, Full In-Lab CAD/CAM System Market,

France, 2010 84

Figure 7-35: Leading Competitors, Standalone Scanner Market, France, 2010 . 86

ABBREVIATIONS 88

LIST OF CHARTS

EXECUTIVE SUMMARY 1

Chart 1-1: Dental Prosthetics Market, Europe, 2007 – 2017 (€M) 1

Chart 1-2: Percentage of Prosthetics Fabricated by CAD/CAM Technology

versus Conventional Methods, Europe, 2007 – 2017 . 2

Chart 1-3: Population per Dentist by Country, Europe, 2010 . 3

Chart 1-4: Dental Prosthetics Market by Country, Europe, 2010 4

Chart 1-5: Growth Rates by Segment, Full-Cast Crown and Bridge Market,

Europe, 2007 – 2017 5

Chart 1-6: Crown and Bridge Market, Europe, 2007 – 2017 (€M) 6

Chart 1-7: Growth Rates by Segment, Denture Market, Europe, 2007 – 2017 . 7

Chart 1-8: CAD/CAM System Market, Europe, 2007 – 2017 (€M) 8

Chart 1-9: Full In-Lab CAD/CAM System Market, Europe, 2007 – 2017 (€M) . 9

Chart 1-10: Standalone Scanners Installed Base, Europe, 2007 – 2017. 10

Chart 1-11: Chairside CAD/CAM system Installed Base, Europe, 2007 – 2017 11

Chart 1-12: Leading Competitors, CAD/CAM System Market, Europe, 2010 . 12

RESEARCH METHODOLOGY 13

FRENCH MARKET FOR DENTAL PROSTHETICS AND CAD/CAM

SYSTEMS . 24

Chart 7-1: Dental Prosthetics Market, France, 2007– 2017 (€M) . 29

Chart 7-2: Crown and Bridge Market, France, 2007 – 2017 (€M). 32

Chart 7-3: Crown and Bridge Market by Material Type, France, 2010 34

Chart 7-4: Crown and Bridge Market by Material Type, France, 2017 35

Chart 7-5: Crown and Bridge Unit Share by Material Type, France, 2007 – 2017 38

Chart 7-6: Denture Market, France, 2007 – 2017 (€M) 52

Chart 7-7: CAD/CAM System Market, France, 2007 – 2017 (€M) 57

Chart 7-8: Full In-Lab CAD/CAM System Market, France, 2007 – 2017 (€M) 61

Chart 7-9: Standalone Scanner CAD/CAM System Market, France, 2007 – 2017

(€M) 65

Chart 7-10: Chairside CAD/CAM System Market, France, 2007 – 2017 (€M) . 68

Chart 7-11: Leading Competitors, CAD/CAM System Market, France, 2010 82

Chart 7-12: Leading Competitors, Full In-Lab CAD/CAM System Market,

France, 2010 84

Chart 7-13: Leading Competitors, Standalone Scanner Market, France, 2010. 86

ABBREVIATIONS 88

To order this report:

Dental Equipment Industry: French Market for Dental Prosthetics and CAD/CAM Devices 2011

Dental Equipment Business News

More  Market Research Report

Check our  Company Profile, SWOT and Revenue Analysis!

Nicolas Bombourg

Reportlinker

Email: nbo@reportlinker.com

US: (805)652-2626

Intl: +1 805-652-2626

SOURCE Reportlinker



RELATED LINKS

http://www.reportlinker.com