Reportlinker Adds Global Unsaturated Polyester Resin Market 2010-2015: Trends, Forecast and Opportunities Analysis

NEW YORK, Feb. 9 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:

Global Unsaturated Polyester Resin Market 2010-2015:Trends,Forecast and Opportunities Analysis

http://www.reportlinker.com/p0176388/Global-Unsaturated-Polyester-Resin-Market-2010-2015TrendsForecast-and-Opportunities-Analysis.html

Abstract Content:

Unsaturated polyester resins (UPR) are the most widely used resin type for composites, comprising in excess of 80% of all thermoset resins (others being epoxies, phenolics, acrylics, imides, and urethanes). Unsaturated polyester resin is the target of this market study; in particular, the focus is on the portion of polyester resins which are used in fiber-reinforced (structural) applications and those which go into non-reinforced uses such as artificial marble or onyx, polymer concrete, and gel coats.

The polyester resin industry is quite mature and is predominantly characterized by well-known and established products, applications and processes. This report provides the status of UPR market by year 2009 and forecast for 2015, by depicting market size, application breakdown, regional analysis etc. Economic recession of 2008-2009 has affected all the industries in the world including UPR market. This market has declined in 2009 and therefore, sales of the major players of UPR have also declined by 20-30% approximately. Over the next 5 years, total UPR consumption across the globe is expected to continue strong growth momentum at 6.3% CAGR. The UPR market is expected to reach US $ 5.8 billion by 2015.

This report provides forecast till 2015, it is expected that UPR market will grow in near future because of new applications and demands. As wind energy and construction market have shown highest growth in last few years it is expected that, this growth will facilitate UPR industry and it will continue the same performance and generate high revenue for the UPR manufacturer.

Some of the features of this market report are:

- The market size and growth rates of the global UPR industry market.

- Market for UPR used in FRP and non-FRP applications.

- UPR market breakdown by applications such as transportation, construction, consumer goods, marine, wind energy, gelcoats etc.

- UPR market breakdown by regions such as North America, Europe, Asia and ROW.

- Market outlook and global trends in automotive, marine, construction, wind energy and other market-segments. Requirements and challenges of various market segments.

- Market forecast in global UPR market by applications and by region.

- Driving factors for the growth in the various applications.

- A total of over 112 figures/charts and 18 tables presented in this report to help in your business plan.

Table of Contents :

Executive Summary

About the UPR Industry

Introduction.

Characteristics of the UPR industry.

Summary and key features.

Resin formulation (amount of resins, fillers, initiators, release agents, and pigments) for various applications and manufacturing processes such as pultrusion, RTM, filament winding and hand lay-up.

Global UPR by Market

Market size for FRP and non-FRP UPR.

Global Polyester Resin Market by Applications.

Driving Forces for the Use of Polyester Resin.

Key Requirements in Various Market Segments and Outlook.

Trends Industry Challenges in Recent Years

Market trends (2004-2009) in global UPR shipment.

Market trends (2004-2009) in reinforced and non reinforced resins shipment.

Market trends (2004-2009) in various applications.

Market trends (2004-2009) in various regions.

Forecasts

Growth forecast (2010-2015) in global UPR shipment.

Growth forecast (2010-2015) in reinforced and non reinforced resins shipment.

Market forecast (2010-2015) in various applications.

Market forecast (2010-2015) in various regions. Growth Opportunities and Emerging UPR Applications

Growth opportunities for the UPR industry. List of applications with growth forecast.

Details of most recent (2005-2007) UPR applications in various market segments. Learn about new opportunities and innovations. Developments to watch.

Materials and Technology Needs for the Future Composites Industry

Several important developments are occurring in various applications, which require new materials and technologies. Recommendations and needs on future materials and technology development.

List of Figures

Chapter 1 Executive Summary

Fig. 1.1: Porter's Five Forces model for the Global UPR market.

Chapter 2 About the UPR Industry

Fig. 2.1 Schematic representation of uncured polyester resin.

Fig. 2.2 Schematic representation of cured polyester resin.

Chapter 3 Global UPR by Market

Fig. 3.1 Global UPR distribution (mil lbs) for FRP & Non-FRP in 2009.

Fig. 3.2 Global UPR distribution ($ mil) for FRP & Non-FRP in 2009.

Fig. 3.3 Global UPR distribution (%, mil lbs) in 2009 by end use application.

Fig. 3.4 Global UPR shipments by application in 2009.

Fig. 3.5 Global UPR distribution (%, $ million) shipment in 2009 by end use application

Fig 3.6 Global UPR shipments ($ million) by applications in 2009.

Fig. 3.7 Global UPR shipment (% mill Ibs) by region in 2009.

Fig. 3.8 Global UPR shipment (million lbs) by regions in the year 2009.

Fig. 3.9 Emphasis on cost and performance by various industries.

Fig. 3.10 UPR distribution in the global transportation industry in 2009.

Fig. 3.11 UPR shipment (million lbs) in the global transportation industry in 2009.

Fig. 3.12 UPR distribution by region in the transportation industry in 2009.

Fig. 3.13 UPR shipment by region in the transportation industry in 2009.

Fig. 3.14 Trends (1991-2007) in total US light vehicle sales (in millions of units).

Fig. 3.15 Trends (1991-2008) in segmented US light vehicle sales (in thousands of units).

Fig. 3.16 Total US light vehicle sales trends for 1970-2008 (in millions of units).

Fig. 3.17 Trends (1991-2007) in segmented US light vehicle sales (in thousands of units).

Fig. 3.18 Total US light vehicle sales trends for 1967-2007 (in millions of units).

Fig. 3.19 UPR distribution in the global construction industry in 2009.

Fig. 3.20 UPR shipment (million lbs) in the global construction industry in 2009.

Fig. 3.21 The construction industry by region in 2009

Fig. 3.22 UPR shipments in the construction industry by region in 2009.

Fig. 3.23 The U.S. Housing starts (1975-2007).

Fig. 3.24 Trend in annual new home average prices

Fig. 3.25 Corrosion market breakdown by type of applications.

Fig. 3.26 Percent comparison of petroleum tank shipments by construction material in North America.

Fig. 3.27 Percent comparison of septic tank shipments (in terms of number) by construction material in North America.

Fig. 3.28 Percentage distribution of sewage pipe market by type of material.

Fig. 3.29 UPR distribution in the global pipe & tank industry in 2009.

Fig. 3.30 UPR shipment (million lbs) in the global pipe & tank industry in 2009.

Fig. 3.31 The pipe & tank industry by region in 2009.

Fig. 3.32 UPR shipments in pipe & tank industry by region in 2009.

Fig. 3.33 UPR in the global marine industry in 2009.

Fig. 3.34 UPR shipments in the marine industry in 2009.

Fig. 3.35 UPR distribution by region in the marine industry in 2009.

Fig. 3.36 UPR shipment by region in the marine industry in 2009.

Fig. 3.37 The U.S. boat trend in terms of total number of unit shipment for 1970-2007.

Fig. 3.38 Personal watercraft (PWC) market trend (1995-2007).

Fig. 3.39 UPR distribution in consumer goods market in 2009.

Fig. 3.40 UPR shipment in consumer goods industry in 2009.

Fig. 3.41 UPR distribution by region in consumer goods industry in 2009.

Fig. 3.42 UPR shipment (million lbs) by region in consumer goods industry in 2009.

Fig. 3.43 UPR resin distribution in electrical/electronic industry in 2009.

Fig. 3.44 Global UPR shipment in electrical/electronic industry in 2009.

Fig. 3.45 UPR distribution by region in electrical/electronic industry in 2009.

Fig. 3.46 UPR shipment by region in electrical/electronics industry in 2009.

Chapter 4 Trends

Fig. 4.1 Global UPR market growth trends (2004-2009).

Fig.: 4.2 Increase in wind energy capacity installations.

Fig. 4.3 UPR market growth trends by regions (2004-2009).

Fig. 4.4 Global UPR market by region in 2004.

Fig. 4.5 Global UPR market by region in 2009.

Fig. 4.7 Growth rates in various market segments of the Global UPR industry in 2009.

Fig. 4.8 Average annual growth rates in various market segments of the Global UPR industry in last 5 years (2004-2009).

Fig. 4.9 North American polyester resin shipment (million lbs) by year.

Fig. 4.10 Growth rates in various market segments of North American polyester resin industry in 2009

Fig. 4.11 Average annual growth rates in various market segments of the North American polyester resin industry in last 5 years (2004-2009).

Fig. 4.12 European UPR distribution by various market segments in 2004.

Fig. 4.13 European UPR distribution by various market segments in 2009.

Fig. 4.14 European UPR shipment by various market segments in 2009.

Fig. 4.15 Growth rates in various market segments of the European UPR industry in 2009.

Fig. 4.16 Average annual growth rates in various market segments of the European polyester resin industry in last 5 years (2004-2009).

Fig. 4.17 Asian polyester resin distribution by market segments in 2004.

Fig. 4.18 Asian UPR distribution by market segments in 2009.

Fig. 4.19 Asian UPR shipment by market segments in 2009.

Fig. 4.20 Growth rates in various market segments of the Asian UPR industry in 2009.

Fig. 4.21 Average annual growth rates in various market segments of the Asian polyester resin industry in last 5 years (2004-2009).

Chapter 5 Forecasts

Fig. 5.1 Consumer spending by year for the US.

Fig. 5.2 Quarterly consumer sentiment (US) for the period 2003-2008. (Source: Reuters Michigan University)

Fig. 5.3 Trend and forecast (1993-2014) in the US GDP. (Source: IMF)

Fig. 5.4 Monthly consumer confidence (US) for the period 2000-2004. (Source: Conference Board)

Fig. 5.5 Trend and forecast (1990-2011) in the US GDP. (Source: Global Insights)

Fig. 5.6 Global UPR distribution (Mil. lbs) by region in 2010.

Fig. 5.7 Global UPR shipment (Mil. lbs) by region in 2010.

Fig. 5.8 Global UPR distribution (Mill lbs) by region in 2015.

Fig. 5.9 Global UPR shipment (Mill lbs) by region in 2015.

Fig. 5.10 Global UPR distribution ($ Mil) by region in 2015.

Fig. 5.11 Global UPR shipment ($ Mil) by region in 2015.

Fig. 5.12 Growth forecast in global polyester resin shipment by market segments in 2010.

Fig. 5.13 Average annual growth forecast in next 5 years (2010-2015) in global UPR shipment by market segments.

Fig. 5.14 Global UPR shipment (Mil lbs) by market segment in 2010.

Fig. 5.15 Global UPR shipment (Mil lbs) by market segment in 2015.

Fig. 5.16 Global UPR shipment ($ million) by market segment in 2015.

Fig. 5.17 Growth forecast in North American UPR shipment by market segments in 2010.

Fig. 5.18 Average annual growth forecast in next 5 years (2010-2015) in North American UPR shipment by market segments.

Fig. 5.19 North American UPR shipment (Mil lbs) by market segments in 2010.

Fig. 5.20 North American UPR shipment (Mil lbs) by market segments in 2015.

Fig. 5.21 North American UPR shipment ($ million) by market segments in 2015.

Fig. 5.22 Growth forecast in European UPR shipment by market segments in 2010.

Fig. 5.23 Average annual growth forecast in next 5 years (2010-2015) in European UPR shipment by market segments.

Fig. 5.24 European UPR shipment (Mil lbs) by market segments in 2010.

Fig. 5.25 European UPR shipment (Mil lbs) by market segments in 2015.

Fig. 5.26 European UPR shipment ($ million) by market segments in 2015.

Fig. 5.27 Growth forecast in Asian UPR shipment by market segments in 2010.

Fig. 5.28 Average annual growth forecast in next 5 years (2010-2015) in Asian UPR shipment by market segments.

Fig. 5.29 Asian UPR shipment (Mil lbs) by market segments in 2010.

Fig. 5.30 Asian UPR shipment (Mil lbs) by market segments in 2015.

Fig. 5.31 Asian UPR shipment (million lbs) by market segments in 2015.

Chapter 6 Growth Opportunities and Emerging UPR Applications

Fig. 6.1 Global UPR growth matrix 2004-09 and 2010-15.

Fig. 6.2 North America growth matrix 2004-09 and 2010-15.

Fig. 6.3 Europe growth matrix 2004 – 09 and 2010-15.

Fig. 6.4 Asia growth matrix 2004 – 09 and 2010 -15.

Fig. 6.5 Structural rebar applications in concrete pad and building applications.

Fig. 6.6 Solar panel applications.

Fig. 6.7 Pultruded Scaffolding.

Fig. 6.8 FRP Gridform for Bridge Applications.

Fig. 6.9 Sheet Pile system.

Fig. 6.10 Polyester resin Trench Covers.

Fig. 6.11 Polyester Composites Doors.

List of Tables

Chapter 1 Executive Summary

Table 1.1 Market parameters and attributes of Global UPR market from materials perspective.

Table 1.2 Market parameters and attributes of Global UPR market from end product perspective.

Chapter 3 Global UPR by Market

Table 3.1 Application of polyester resin materials in the automotive industry.

Table 3.2 Segmented US Light Vehicle Sales (in thousands of units).

Chapter 4 Trends

Table 4.1 Market trends (2004-2009) in global polyester resin shipment.

Table 4.2 Average growth rates for 1, 3, and 5 years in the NA polyester resin industry

Table 4.3 Average annual growth rates in various regions of the Global UPR industry.

Table 4.4 Market size and annual growth rates in various segments of global polyester resin industry.

Table 4.5 Market size and annual growth rates during last 5 years (2004-2009) in various market segments of global UPR industry. (Source: Lucintel)

Table 4.6 Market trends (2002-2007) in North American polyester resin shipment.

Chapter 5 Forecasts

Table 5.1 GDP and unemployment rate for leading countries as of April 2008. (Source: The Economist)

Table 5.2 Interest and exchange rates for leading countries. Interest rate % p.a. (May 7th 2008) (Source: The Economist)

Table 5.3 Emerging market indicators (Economy and financial market). (Source: Economist)

Table 5.4 Forecast for select markets.

Table 5.5 Average annual growth forecasts in various regions of the global polyester resin industry (2010-2015).

Table 5.6 Market size and annual growth forecasts during the next 5 years (2010-2015) in various market segments of the global polyester resin industry. (Source: Lucintel)

Chapter 6 Growth Opportunities and Emerging UPR Applications

Table 6.1: Growth applications for polyester resin industry.

Chapter 7 Materials and Technology Needs for the Future Composites Industry

Table 7.1 Maximum continuous use temperatures for various thermosets and thermoplastics.

To order this report:

Resin and Rubber Industry: Global Unsaturated Polyester Resin Market 2010-2015: Trends, Forecast and Opportunities Analysis

More  Market Research Report

Check our  Company Profile, SWOT and Revenue Analysis!

SOURCE Reportlinker