Reportlinker Adds Growth Opportunities in Chinese Wind Energy Market 2011-2016 Trends, Forecast and Opportunity Analysis
NEW YORK, April 27, 2011 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:
Over the last decade, China has been strengthening its position in wind energy generation and gradually emerged as the first largest installed base of wind turbines in the world. The wind turbine manufacturing sector in China is experiencing a rapid development, as lots of domestic manufacturers have emerged within a short span of time.
China is one of the world's pioneers in the wind power development. The country's progress can be viewed in three periods of wind power development. Chinese wind industry is active from last 20 years but it has a long history in itself. In last few years it has shown a good growth, before 5 years it was around 1.2 GW but now it has reached around 44.7 GW. It is growing at a high pace of around 104%.
Wind energy in China has grown at a CAGR of 104% in the last 5 years (2005-2010) on cumulative installation basis and reached 44,734 MW in 2010. The market is expected to grow with a CAGR of 19% for the next five years (2011-2016) on cumulative MW installations. Various factors will drive growth of the wind industry. The union government's support and generation based incentives for renewable energy, growing electricity demand and CDM support is expected to drive the wind energy market in China.
"Growth Opportunities in Chinese Wind Energy Market: 2011-2016 Trends, Forecast and Opportunity Analysis" report from Lucintel provides the valuable information and tools that you need to successfully take advantage of opportunities in Chinese wind energy market. In today's global economy, you need every advantage that you can find to keep you ahead in your business. Learn about current and future trends, identify key players, and explore the future directions in which Chinese wind energy market is headed.
Material suppliers and product manufacturers need to continually stay abreast, critically analyze, and act fast to capture maximum market share, growth and profitability in various applications and markets. This unique report from Lucintel will provide you with valuable information, insights and tools needed to identify new growth opportunities and operate your business successfully in this market. This report will save hundreds of hours of your own personal research time and will significantly benefit you in expanding your business in this market. In today's stringent economy, you need every advantage that you can find to keep ahead in your business.
1. Executive Summary
1.1 Chinese Wind Energy Market
1.2 Porter's Five Forces Analysis of Chinese Wind Turbine Market
1.2.1 Porter's five forces for wind turbine market of China
2. Overview of the Chinese Wind Industry
2.1 Current Wind Market of China
2.2 The Chinese Renewable Energy Law
2.2.1 Renewable Energy Law 2009 Amendments
2.2.2 The Renewable Energy Premium
2.3.3 Feed-In-Tariff Regulation
3. Chinese Wind Energy Market Analysis
3.1 Product Mapping for Wind Turbine Manufacturers in China, 2010
3.2 Competitive Analysis of OEMs for 2010
3.2.1 Foreign Vs domestic turbine manufactures
3.3 Supply Chain Analysis for 2010
3.3.1Key Suppliers of Wind Turbine Components in China
3.3.2 Wind Supply Chain of Major OEMs
3.3.3 Domestic Vs International Sourcing of Components in China
3.4 Market Share and Market Consolidation Analysis for 2010
3.5 Turbine Size Breakdown & Market Demand for Low (1.5 MW) Turbines in 2010
3.6 Composites Market Analysis 2010
4. Chinese Wind Energy Market Trends (2005-2010)
4.1 Wind Energy Installation Trends (2005-2010)
4.1.1 Comparative Study of MWs Installed in 2005 & 2010
4.2 China wind turbine market size trend (2005-2010)
4.3 Installation Trends of Low, Medium & High MW Wind Turbines (2005-2010)
4.4 Composites Consumption Trend (2005-2010)
4.4.1 Comparative Study of Composites Consumption (2005 & 2010) in Wind Market
5. Chinese Wind Energy Market Forecasts (2011-2016)
5.1 Wind Energy Installation Forecast (2011-2016)
5.1.1 Comparison between yearly MW Installations in 2011 & 2016
5.2 Low, Medium & High MW Wind Turbine Installations (2011-2016)
5.2.1 Comparison between Turbine Sizes of 2011 & 2016
5.3 Composites Consumption Forecast 2011-2016
5.3.1 Comparative Study of Composites Consumption (2011 & 2016) in Wind Market
5.4 Growth Drivers
6. Competitors' Profile
6.1 Sinovel Wind Group Co., Ltd
6.2 Xinjiang Goldwind Science & Technology Co., Ltd.
6.3 Dongfang Electric
7. Current MRO Market of China
7.1 MRO Market of China 2010
Component Wise MRO
7.1.1 Gear Box MRO
7.1.2 Generator MRO
7.1.3 Blade MRO
7.1.4 Component's down time & failure frequency
7.2 Chinese MRO Market Trend (2005 - 2010)
7.2.1 Comparison between Wind MRO Markets of 2005 & 2010
8. Growth Opportunities in Chinese Wind Market
8.1 Opportunities in Chinese Wind Market
8.1.1 Wind Power Installation in Different States
8.1.2 Wind Potential Distribution in Different Wind Classes
8.1.3 Opportunity in China Wind Power Market
List of Figures
Chapter 1
Fig.1.1: Porter's five forces model for the Chinese wind turbine market
Chapter 3
Fig 3.1: Market share of major players: 2010
Fig 3.2: Annual market share of domestic and foreign players
Chapter 4
Fig. 4.1: Annual wind power installations in China (MW)
Fig. 4.2: Cumulative wind power installations in China (MW)
Fig. 4.3: Wind turbine market size trend in China (MW).
Fig. 4.4: Installation trends of high, medium & low MW wind turbines
Fig. 4.5: Average size turbine trend (MW)
Fig. 4.6: Typical composite materials distribution by turbine components
Fig. 4.7: Annual composites consumption trend in turbines (M lbs)
Chapter 5
Fig. 5.1: Annual forecast for wind power installations in China (MW)
Fig. 5.2: Cumulative wind power installation forecast in China (MW)
Fig. 5.3: High, medium & low MW wind turbine installations forecast (2011-2016)
Fig. 5.4: Annual composites consumption forecast in turbines (M lbs)
Chapter 7
Fig. 7.1: Figure of severe wear in bearing
Fig. 7.2: Figure of worn out planet bearing
Fig. 7.3: Figure of girding temper
Fig. 7.4: Figure of broken tooth
Fig. 7.5: Figure of manufacturing failure in blade
Fig. 7.6: Figure of large repair in blade roots
Fig. 7.7: Figure of large repair in blade roots
Fig. 7.8: Figure of damage from lightning strike in blade
Fig. 7.9: Figure of cracks in trailing edge
Fig. 7.10: Figure of skins delaminated from the spars
Fig. 7.11: Analysis of the annual failure frequency and average down time of the main wind turbine components
Fig. 7.12: MRO market trends of China 2005-2010 ($ M)
Chapter 8
Fig. 8.1: Current installations and opportunities in onshore Chinese wind market
Fig. 8.2: Wind power installation in different States
Fig. 8.3: Potential distribution according to different wind classes
Fig. 8.4: 2016 Opportunity analysis in top wind states China
Fig. 8.5: Top wind power installation States China
List of Tables
Chapter 1
Table 1.1: Overview of the Chinese wind market
Table 1.2 Market parameters for the Chinese wind MRO market and attributes of end users
Table 1.3 Market parameters & attributes for composites in the Chinese wind market
Chapter 3
Table 3.1: Product mapping of wind turbine manufacturers
Table 3.2: Key suppliers of wind turbine components in China
Table 3.3: Wind supply chain for top OEMs in China
Table 3.4: Domestic Vs International Sourcing of Components in China
Table 3.5: Turbine size breakdown for 2010
Table 3.6: Composites consumption in 2010
Chapter 4
Table 4.1: Growth trend (2005-2010) for new as well as cumulative installations
Table 4.2: Chinese annual nominal wind power installation growth rates (CAGR) for the last 1, 3, and 5
years
Table 4.3: Installation trends of different size turbines in % share of MW installed
Table 4.4: Chinese annual nominal low MW (
the last 1, 3, and 5 years
Table 4.5: Chinese annual nominal medium MW (1.5 MW) wind turbine installation growth rates (CAGR)
for the last 1, 3, and 5 years
Table 4.6: Chinese annual nominal high MW (>1.5 MW) wind turbine installation growth rates (CAGR) for
the last 1, 3, and 5 years
Table 4.7: Composites consumption trend in Chinese wind sector (2005 - 2010)
Table 4.8: Chinese annual nominal composites consumption growth rate (CAGR) for the last 1, 3, and 5
years
Chapter 5
Table 5.1: Growth forecast (2011-2016) for new as well as cumulative capacity
Table 5.2: Chinese annual nominal wind power installation growth rates (CAGR) for the last 1, 3, and 5
years
Table 5.3: Installation forecast for different size turbines in % share of MW installed
Table 5.4: Chinese annual nominal low MW (
Table 5.5: Chinese annual nominal medium MW (1.5 MW) wind turbine installation growth rates (CAGR)
for the last 1, 3, and 5 years
Table 5.6: Chinese annual nominal high MW (>1.5 MW) wind turbine installation growth rates (CAGR) for
the last 1, 3, and 5 years
Table 5.7: Composites consumption forecast in wind sector of China (2011-2016)
Table 5.8: Chinese annual nominal composites consumption growth rates (CAGR) for the last 1, 3, and 5 years
Chapter 7
Table 7.1: Chinese MRO market trend 2005-2010 ($ M)
Table 7.2: Chinese MRO market trend (2005 - 2010)
Table 7.3: Chinese annual nominal MRO market growth rates (CAGR) for the last 1, 3, and 5 years
To order this report:
Check our Company Profile, SWOT and Revenue Analysis!
Contact:
Nicolas Bombourg
Reportlinker
Email: [email protected]
US: (805)652-2626
Intl: +1 805-652-2626
SOURCE Reportlinker
Share this article