Two Day Applying ISO14971 and IEC62304 Course: A Guide to Practical Risk Management - Philadelphia, United States - June 27-28, 2019
DUBLIN, May 31, 2019 /PRNewswire/ -- The "Applying ISO14971 and IEC62304 - A guide to practical Risk Management" conference has been added to ResearchAndMarkets.com's offering.
Gaps, incorrect or incomplete implementation of safety functionality can delay or make the certification/approval of medical products impossible. Most activities cannot be retroactively performed since they are closely linked into the development lifecycle. Diligent, complete and correct implementation of risk management from the start of product development is therefore imperative. This course will introduce all necessary steps to design, implement and test critical medical devices in a regulatory compliant environment. This course will additionally address the software risk management and the resulting interfaces to device level risk management.
To comprehensively summarize all risk related activities and to demonstrate the safe properties of a device the 'Safety Case' or 'Assurance Case' document is a well-established method to collect all safety related information together in one place. This documentation will most likely become mandatory for all devices (currently only required for FDA infusion pump submissions). This course will introduce the basic concepts and content of safety assurance cases and will illustrate the usefulness for internal and external review of safety related information.
Who Should Attend:
- Senior quality managers
- Quality professionals
- Regulatory professionals
- Compliance professionals
- Project managers
- Design engineers
- Software engineers
- Process owners
- Quality engineers
- Quality auditors
- Medical affairs
- Legal Professionals
Agenda:
Day 1 Schedule
Lecture 1:
Introduction into Risk Management and Quality System Integration
- Why risk management?
- Historical perspective
- International regulatory / statutory requirements
- Risk Management Lifecycle and stakeholders
- Over-reaching concept
- Integration into ISO13485
- Lifecycle steps
- Risk Management Benefits
- Liability issues
- Streamlining product development
- Improving product safety and quality
- How to Implement Risk Management into ISO13485
- SOP framework
- Planning and execution
- Monitoring and control
Lecture 2:
Risk Management to ISO 14971:2012
- Risk Management Planning
- Risk Management Life Cycle
- Hazard Identification
- Hazard Domains
- Hazard Latency Issues
- Risk Rating Methods
- Initial (unmitigated) Risk Assessment
- Mitigation Strategies and Priorities
- Mitigation Architectures
- Alarm Systems as Mitigations
- Risk Control Bundles
- Post Mitigation Risk
- Residual Risk
- Safety Integrity Levels
- European special requirements (Z-Annexes)
- Safety Requirements
- Hazard Mitigation Traceability
- Verification Planning
- Architectures, Redundancy and Diversity
- Failure Mode and Effect Analysis
- Tips and Tricks
- Q&A
Day 2 Schedule
Lecture 1:
Usability and Risk Management
- Use errors as hazard source
- User intervention as hazard mitigation
- Usability engineering lifecycle
- Application specification
- Usability Specification
- Frequently used functions / primary operating functions
- Usability verification / validation
- Upcoming changes IEC62366:2014
Lecture 2:
Software Risk Management (IEC62304 / FDA software reviewers' guidance):
- Critical Software Issues
- Software Hazard Mitigation Strategies
- Software Item, Unit and System Definition
- Software Failures as Hazard Sources
- Software Requirements and Design Specification
- Software Tools and Development Environment
Lecture 3:
Software Risk Management (IEC62304 / FDA software reviewers' guidance):
- Software Unit and Integration Testing
- Real-Time System Challenges
- Software Verification and Validation
- Mitigation Traceability and Effectiveness
- Software Maintenance and Configuration Control
- Software Risk Management Process integration into ISO14971
- Legacy Software issues
- FDA documentation requirements
- Upcoming changes in IEC62304:2014
- Tips and Tricks
Lecture 4:
Safety / Assurance case
- Safety classes
- Basic Safety / Environment
- Essential performance
- Documentation of Basic Safety
- Electrical Safety
- Mechanical Safety
- EMC / RFI safety
- Safety margins
- Documentation of essential performance
- What is essential performance?
- Device architectures and mitigation allocation
- Device specific mitigations
- Software mitigations
- External safety
- User intervention and alarms
- Organizational measures
- Levels of protection concept
- Verification of safety properties
- Type testing
- Sample testing
- Software verification testing
- Inspections
- Analyses
- Assurance case vs. Risk Management Report
- General safety and hazard avoidance
- Device / application specific issues
- Tips and Tricks
- Q&A
Speakers:
Markus Weber
Principal Consultant
System Safety Inc.
Markus Weber, Principal Consultant with System Safety, Inc., specializes in safety engineering and risk management for critical medical devices. He graduated from Ruhr University in Bochum, Germany with a MS in Electrical Engineering. Before founding System Safety, Inc., he was a software safety engineer for the German approval agency, TUV. Since 1991, Mr. Weber has been a leading consultant to the medical device industry on safety and regulatory compliance issues, specifically for active and software-controlled devices. In conjunction with the FDA, he has published works on risk management issues and software-related risk mitigations. Mr. Weber has helped multiple companies, from startups to Fortune 500 firms.
For more information about this conference visit https://www.researchandmarkets.com/r/unxqgu
About ResearchAndMarkets.com
ResearchAndMarkets.com is the world's leading source for international market research reports and market data. We provide you with the latest data on international and regional markets, key industries, the top companies, new products and the latest trends.
Research and Markets also offers Custom Research services providing focused, comprehensive and tailored research.
Media Contact:
Laura Wood, Senior Manager
[email protected]
For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900
U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716
SOURCE Research and Markets
Share this article