Updated Mineral Resource Estimate Confirms the Pebble Project as North America's Most Important New Copper-Gold-Molybdenum Development Opportunity

VANCOUVER, Feb. 1 /PRNewswire-FirstCall/ - Northern Dynasty Minerals Ltd. (TSX: NDM; NYSE Amex: NAK) announces that the Pebble Limited Partnership ("PLP" or the "Pebble Partnership") has provided an updated mineral resource estimate for southwest Alaska's Pebble Project, confirming it as one of the world's most significant undeveloped copper-gold-molybdenum porphyry deposits and North America's most important mineral development opportunity.

Additional core drilling conducted at the Pebble Project site has verified the grade and distribution of mineralization in the high-grade eastern portion of the deposit, while substantially increasing the amount of contained metal and upgrading the confidence classification. The new drill results, in concert with revised economic parameters, have resulted in an improved mineral resource estimate for the Pebble deposit.

The new Pebble resource estimate is based on 509 core holes, including 37 new holes drilled since mid-2008, and updates the estimate released on December 4, 2008. The new estimate represents a 17% increase in resources within higher confidence measured and indicated categories, and a 12%, 14% and 16% increase in contained copper, gold and molybdenum, respectively.

"The quantity, grade and continuity of mineralization at Pebble, as well as the fact that more than 55% of the resource is now classified in measured and indicated categories, demonstrate the project's potential to be one of the great metal producers of the 21st century," said Northern Dynasty President & CEO Ron Thiessen. "Based on this estimate, the Pebble Project has further entrenched its status among the top-tier of global copper and molybdenum resources, and the most significant undeveloped gold resource in the world."

Mineral resources are reported at various cut-off grades as presented in the Table of Pebble Deposit Mineral Resources - January 2009 below.

At a 0.30% copper equivalent (CuEQ, see Note 1) cut-off, the Pebble Deposit Mineral Resources comprise:

    -   5.94 billion tonnes of Measured and Indicated Mineral Resources
        grading 0.78% CuEQ, containing
        55 billion pounds of copper, 67 million ounces of gold, and
        3.3 billion pounds of molybdenum; and
    -   4.84 billion tonnes of Inferred Mineral Resources grading 0.53% CuEQ,
        containing
        25.6 billion pounds of copper, 40.4 million ounces of gold, and
        2.3 billion pounds of molybdenum.

The estimate was prepared for the Pebble Partnership. David Gaunt, P. Geo, a qualified person as defined under 43-101 who is not independent of Northern Dynasty, is responsible for the estimate. He has reviewed the contents of this release. A technical report providing details of the estimate will be filed on www.sedar.com within 45 days.

The Pebble Project is located in southwest Alaska on state land designated for mineral exploration and development. It is situated approximately 1,000 feet above sea-level, 65 miles from tidewater on Cook Inlet and presents favourable conditions for successful mine site and infrastructure development. The Pebble Partnership is working to advance a Prefeasibility Study for the Pebble Project and preparing to initiate project permitting under the National Environmental Policy Act (NEPA) in 2011, a process estimated to take 2 - 3 years to complete.

The Pebble Partnership was established in July 2007 as a 50:50 partnership between a wholly-owned affiliate of Northern Dynasty and a wholly-owned subsidiary of Anglo American plc. To retain a 50% interest, Anglo American is required to invest US$1.425 to $1.5 billion to advance the Pebble Project toward permitting and operations.

               PEBBLE DEPOSIT MINERAL RESOURCES - JANUARY 2010

                         MEASURED MINERAL RESOURCES
    -------------------------------------------------------------------------
    Cut-Off        Size                 Grade              Contained Metal
    -------------------------------------------------------------------------
      CuEQ       Tonnage       Cu    Gold    Mo   CuEQ   Copper  Gold    Mo
        %                       %     g/t   ppm     %     B lb   M oz   B lb
    -------------------------------------------------------------------------
      0.30      527,000,000   0.33   0.35   178   0.65     3.8    5.9   0.21
    -------------------------------------------------------------------------
      0.40      508,000,000   0.34   0.36   180   0.66     3.8    5.9   0.20
    -------------------------------------------------------------------------
      0.60      277,000,000   0.40   0.42   203   0.77     2.4    3.7   0.12
    -------------------------------------------------------------------------
      1.00       27,000,000   0.62   0.62   301   1.16     0.4    0.5   0.02
    -------------------------------------------------------------------------
    -------------------------------------------------------------------------
                         INDICATED MINERAL RESOURCES
    -------------------------------------------------------------------------
    Cut-Off        Size                 Grade              Contained Metal
    -------------------------------------------------------------------------
      CuEQ       Tonnage       Cu    Gold    Mo   CuEQ   Copper  Gold    Mo
        %                       %     g/t   ppm     %     B lb   M oz   B lb
    -------------------------------------------------------------------------
      0.30    5,414,000,000   0.43   0.35   257   0.80    51.3   60.9   3.07
    -------------------------------------------------------------------------
      0.40    4,891,000,000   0.46   0.36   268   0.85    49.6   56.6   2.89
    -------------------------------------------------------------------------
      0.60    3,391,000,000   0.56   0.41   301   1.00    41.9   44.7   2.25
    -------------------------------------------------------------------------
      1.00    1,422,000,000   0.77   0.51   342   1.30    24.1   23.3   1.07
    -------------------------------------------------------------------------
    -------------------------------------------------------------------------
                   MEASURED + INDICATED MINERAL RESOURCES
    -------------------------------------------------------------------------
    Cut-Off        Size                 Grade              Contained Metal
    -------------------------------------------------------------------------
      CuEQ       Tonnage       Cu    Gold    Mo   CuEQ   Copper  Gold    Mo
        %                       %     g/t   ppm     %     B lb   M oz   B lb
    -------------------------------------------------------------------------
      0.30    5,942,000,000   0.42   0.35   250   0.78    55.0   66.9   3.28
    -------------------------------------------------------------------------
      0.40    5,399,000,000   0.45   0.36   260   0.83    53.6   62.5   3.09
    -------------------------------------------------------------------------
      0.60    3,668,000,000   0.55   0.41   293   0.98    44.5   48.3   2.37
    -------------------------------------------------------------------------
      1.00    1,449,000,000   0.76   0.52   341   1.29    24.3   24.2   1.09
    -------------------------------------------------------------------------
    -------------------------------------------------------------------------
                         INFERRED MINERAL RESOURCES
    -------------------------------------------------------------------------
    Cut-Off        Size                 Grade              Contained Metal
    -------------------------------------------------------------------------
      CuEQ       Tonnage       Cu    Gold    Mo   CuEQ   Copper  Gold    Mo
        %                       %     g/t   ppm     %     B lb   M oz   B lb
    -------------------------------------------------------------------------
      0.30    4,835,000,000   0.24   0.26   215   0.53    25.6   40.4   2.29
    -------------------------------------------------------------------------
      0.40    2,845,000,000   0.32   0.30   259   0.66    20.1   27.4   1.62
    -------------------------------------------------------------------------
      0.60    1,322,000,000   0.48   0.37   289   0.89    14.0   15.7   0.84
    -------------------------------------------------------------------------
      1.00      353,000,000   0.69   0.45   379   1.20     5.4    5.1   0.29
    -------------------------------------------------------------------------
    -------------------------------------------------------------------------

    Note 1 Copper equivalent calculations used metal prices of US$1.85/lb for
           copper, US$902/oz for gold and US$12.50/lb for molybdenum, and
           metallurgical recoveries of 85% for copper, 69.6% for gold, and
           77.8% for molybdenum in the Pebble West area and 89.3% for copper,
           76.8% for gold, 83.7% for molybdenum in the Pebble East area.
           Recovery values reflect average results of metallurgical testwork
           completed to date and are subject to revision pending ongoing
           metallurgical studies. Revenue is calculated for each metal based
           on grades, recoveries and selected metal prices: accumulated
           revenues are then divided by the revenue at 1% copper. Recoveries
           for gold and molybdenum are normalized to the copper recovery as
           show below:
              CuEQ (Pebble West) = Cu % + (Au g/t x 69.6%/85% x
              29.00/40.79) + (Mo % x 77.8%/85% x 275.58/40.79)
              CuEQ (Pebble East) = Cu% + (Au g/t x 76.8%/89.3% x
              29.00/40.79) + (Mo % x 83.7%/89.3% x 275.58/40.79)

    Note 2 By prescribed definition, "Mineral Resources" do not have
           demonstrated economic viability. An Inferred Mineral Resource is
           that part of a mineral resource for which quantity and grade can
           be estimated on the basis of geological evidence and limited
           sampling and reasonably assumed, but not verified, geological and
           grade continuity. The mineral resources fall within a volume or
           shell defined by long-term metal price estimates of US$2.50/lb for
           copper, US$900/oz for gold and US$25/lb for molybdenum.

    Note 3 For bulk underground mining, cut-offs such as 0.60% CuEQ, are
           typically used for porphyry deposit bulk underground mining
           operations at copper porphyry deposits located around the world. A
           0.30% CuEQ cut-off is considered to be comparable to that used for
           porphyry deposit open pit mining operations in the Americas.

    Note 4 All mineral resource estimates, cut-offs and metallurgical
           recoveries are subject to a feasibility study.


    Ronald W. Thiessen
    President and CEO

ALS Chemex in North Vancouver, Canada (an ISO 9003 certified facility) is the main laboratory for the analysis of drill core samples from the Pebble Project. Duplicate samples are analyzed by Acme Analytical Laboratories of Vancouver, Canada.

                             Sole Responsibility

       No regulatory authority accepts responsibility for the adequacy
                         or accuracy of this release.

     Northern Dynasty is solely and entirely responsible for the contents
      of this news release. No other party, including any parties which
     have an interest in the project, are in any way responsible for the
                               contents hereof.

         Comments on Forward Looking Information, Estimates and other
                             Cautionary Factors

This release includes certain statements that may be deemed "forward-looking statements". All statements in this release, other than statements of historical facts, especially those that address estimated resource quantities, grades and contained metals, are forward-looking statements because they are generally made on the basis of estimation and extrapolation from a limited number of drill holes and metallurgical studies. Although diamond drill hole core provides valuable information about the size, shape and geology of an exploration project, there will always remain a significant degree of uncertainty in connection with these valuation factors until a deposit has been extensively drilled on closely spaced centers, which has occurred only in specific areas on the Pebble Project. Although the Company believes the expectations expressed in its forward-looking statements are based on reasonable assumptions, such statements should not be in any way construed as guarantees of the ultimate size, quality or commercial feasibility of the Pebble Project or of the Company's future performance. The likelihood of future mining at the Pebble Project is subject to a large number of risks and will require achievement of a number of technical, economic and legal objectives, including obtaining necessary mining and construction permits, completion of pre-feasibility and final feasibility studies, preparation of all necessary engineering for underground workings and processing facilities as well as receipt of significant additional financing to fund these objectives as well as funding mine construction. Such funding may not be available to the Company on acceptable terms or on any terms at all. There is no known ore at the Pebble Project and there is no assurance that the mineralization at the Pebble Project will ever be classified as ore. The need for compliance with extensive environmental and socio-economic rules and practices and the requirement for the Company to obtain government permitting can cause a delay or even abandonment of a mineral project. The Company is also subject to the specific risks inherent in the mining business as well as general economic and business conditions. For more information on the Company, Investors should review the Company's annual Form 40-F filing with the United States Securities and Exchange Commission and its home jurisdiction filings that are available at www.sedar.com.

                           Information about CuEQ

Copper equivalency or "CuEQ" is a manner of expressing polymetallic deposits as a grade of the principal mineralization (by value). As used herein, gold and molybdenum values have been expressed as part of the copper grade. CuEQ is provided for illustrative purposes only.

         Information Concerning Estimates of Measured, Indicated and
                             Inferred Resources

This news release uses the terms "measured resources", "indicated resources" and "inferred resources". Northern Dynasty Minerals Ltd. advises investors that although these terms are recognized and required by Canadian regulations (under National Instrument 43-101 Standards of Disclosure for Mineral Projects), the U.S. Securities and Exchange Commission does not recognize them. Investors are cautioned not to assume that any part or all of the mineral deposits in these categories will ever be converted into reserves. In addition, "inferred resources" have a great amount of uncertainty as to their existence, and economic and legal feasibility. It cannot be assumed that all or any part of an Inferred Mineral Resource will ever be upgraded to a higher category. Under Canadian rules, estimates of Inferred Mineral Resources may not form the basis of feasibility or pre-feasibility studies, or economic studies except for Preliminary Assessment as defined under 43-101. Investors are cautioned not to assume that part or all of an inferred resource exists, or is economically or legally mineable.

SOURCE Northern Dynasty Minerals Ltd.