Taiyo Holdings Launches Next-generation Semiconductor-packaging Material "FPIM (TM) Series," Its First Successful Formation of 3-layer RDL with CD 1.6 Micrometers on 12-inch Wafer
- Paper Presented at 14th IEEE CPMT Symposium Japan (ICSJ 2025) -
TOKYO, Nov. 13, 2025 /PRNewswire/ -- On November 13, 2025, Taiyo Holdings Co., Ltd. (Securities Code: 4626; hereinafter referred to as "Taiyo Holdings"), based in Tokyo, presented a paper, co-authored with imec, one of the world's largest semiconductor research institutions, at the 14th IEEE CPMT Symposium Japan (ICSJ2025), focusing on the "FPIM (TM) Series" (hereinafter referred to as "this material"), a negative-type photosensitive insulating material for fine-pitch RDLs (*1) designed for the damascene process, developed as a next-generation semiconductor-packaging material.
The RDL is an important technology in the most advanced structures of semiconductor packaging for more efficient electrical connections, and it is currently manufactured mainly by the semi-additive process (SAP) (*2). The damascene process (*3), imec suggests, will become essential for forming interconnections with line spacing of 1.6 micrometers or less in the future, as finer wiring is pursued. In response, Taiyo Holdings has been developing this material as a next-generation fine-pitch RDL material for the damascene process and has been conducting joint research with imec since October 2022. In this study, a three-layer RDL structure was formed on a 12-inch wafer using this material, and evaluations were carried out. Each wiring pitch achieved the target dimensions as follows: CD (*4) 1.6 micrometers for the RDL1 layer on the wafer, CD 2.0 micrometers (with a via center-to-center pitch of CD 4.0 micrometers) for the via layer, and CD 1.6 micrometers for the RDL2 layer. These values are extremely close to the resolution limit of the low NA stepper (*5) used in this study. In addition, the evaluation results of the electrical characteristics, specifically, leakage current and resistance, of the RDL1 layer with CD 1.6 micrometers were favorable. As an outcome of this joint research with imec, it was confirmed that this material possesses excellent electrical properties, high resolution, and quality suitable for adaptation to the CMP process (*6).
In the future, the company aims to achieve the formation of RDLs on wafers with a wiring pitch of CD 500 nm or less, while continuing to verify the long-term performance of electrical characteristics and reliability. Taiyo Holdings will continue developing materials that contribute to advances in the semiconductor-packaging field, including further performance enhancement of AI semiconductors. In addition, shipment of small-quantity samples of this material for R&D purposes began in 2025.
Notes:
(*1) RDL (redistribution layer) is a layer formed on the surface of a semiconductor chip to redistribute electrical wiring.
(*2) A method in which a thin seed layer is first formed over the entire surface, and then wiring patterns are formed by electroplating on the wiring areas.
(*3) A method in which grooves for wiring are formed on an insulating film, and the grooves are filled and patterned using sputtering, CVD, electroplating, or similar processes.
(*4) CD (critical dimension) refers to the dimensions of fine patterns.
(*5) Veeco Low NA (0.16) i-line exposure system AP300 (first generation).
(*6) CMP process (chemical mechanical planarization/polishing) is a process in semiconductor manufacturing that chemically and mechanically planarizes the wafer surface.
Title of co-authored paper
Development of 1.6 micrometer Fine-Pitch RDL Damascene Process using Low-NA i-Line Stepper and a New Negative-tone Photosensitive Dielectric Material
Structure of evaluation sample:
https://cdn.kyodonewsprwire.jp/prwfile/release/M108899/202511108806/_prw_PI1fl_9Rzhabg4.png
Product image:
https://cdn.kyodonewsprwire.jp/prwfile/release/M108899/202511108806/_prw_PI2fl_yb3oqDfr.png
- About Collaboration between imec and Taiyo Holdings
Headquartered in Belgium, imec, which is short for "Interuniversity Microelectronics Centre," is one of the world's largest semiconductor research institutes. It promotes open innovation by collaborating with universities and companies around the world, contributing to the development of cutting-edge semiconductor technologies. In October 2022, imec and Taiyo Holdings began joint research on a negative-type photosensitive insulating material for fine-pitch RDLs used in the damascene process --a next-generation semiconductor-packaging material. Since November 2024, Taiyo Holdings has dispatched resident researchers to imec to establish an environment for smoother collaboration and continues daily research and development of advanced semiconductor materials.
- Company Overview of Taiyo Holdings Co., Ltd.:
https://kyodonewsprwire.jp/attach/202511108806-O1-ttbIvpYv.pdf
Official website: https://www.taiyo-hd.co.jp/en/index.html
SOURCE Taiyo Holdings Co. Ltd.
Share this article