Broadband Amplifier Line from Teseq Offers Low Distortion, Reliability New CBA 400M-260 operates from 10 kHz to 400 MHz with a rated power of 260 watts

EDISON, N.J., May 10, 2013 /PRNewswire/ -- Teseq, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, has expanded its broadband amplifier line to include a Class A linear and low distortion model that operates from 10 kHz to 400 MHz with a rated power level of 260 watts.  Used in commercial or in-house EMC test laboratories, the CBA 400M-260 is ideal for automotive, military and aerospace BCI (bulk current injections) applications that require testing at higher levels.

(Photo: http://photos.prnewswire.com/prnh/20130510/PH11192)

Like other Teseq broadband amplifiers in its class, the CBA 400M-260 uses gallium arsenide (GaAs) integrated circuit technology to provide better compression characteristics and increased efficiency compared to silicon-based power amplifiers.  This amplifier reduces overall power consumption.

The new CBA 400M-260 is designed for demanding EMC testing environments with non-ideal load conditions due to mismatch caused by the coupling device or equipment under test (EUT) in an antenna's path, making it ideal for automotive, military and aerospace BCI EMC testing.    

The push pull design of the GaAs amplifier circuit ensures high reliability and low distortion linear performance across the unit's frequency range as well as continuous operation at full power, even when an open or short circuit is present.  Testing accuracy is improved because the desired test signal is generated with low harmonics.  

The CBA 400M-260 is powered from a switched mode power supply for high efficiency, giving the amplifier a high power factor and a wide voltage operating range.  All tests are performed with this single band amplifier - no range switching or amplifier changes are necessary.

Integral fans are built into the amplifier for cooling and an excess temperature sensor in the unit prevents possible damage due to a blocked filter or faulty cooling.  A remote control option is available for the CBM 400M-260 upon request.

Two safety interlock BNC connectors are provided for added flexibility should a standby mode be needed.  Front panel indicators denote over-temperature and RF interlock conditions.

Harmonics are better than -20 dBc at 210 W output.  Operating temperature ranges from 0 degrees to 40 degrees C (32 degrees F to 104 degrees F).

This new CBA 400M-260 comes with a three year parts and labor warranty.

Pricing for the CBA 400M-260 starts at $32,000 and lead time is 12-16 weeks ARO.

Contact Teseq USA directly for pricing or to find out about renting Teseq products.

For more information, please visit http://www.teseq.com or contact MaryJane Salvador, Teseq Inc., 52 Mayfield Avenue, Edison, N.J. 08837. Tel: (732) 417-0501 ext. 239; Fax: (732) 417-0511; E-mail: maryjane.salvador@teseq.com.  Web: http://www.teseq.com.

For high res download and full text:
http://www.simongroup.com/PressRoom/press-release.php?Job=TES-A-2256

Subscribe to Teseq's RSS feed: http://feeds.feedburner.com/Teseq
Follow us on Twitter: TeseqInc: http://twitter.com/TeseqInc
Become a fan of Teseq Inc.: https://www.facebook.com/Teseq

UPCOMING TRADE SHOWS:  IMS/MTTS, 6/2-7, Seattle, Washington

READER SERVICE INQUIRIES: Please forward all reader service inquiries to MaryJane Salvador, Teseq Inc., 52 Mayfield Avenue, Edison, N.J. 08837.

EDITOR'S NOTE: Teseq, provider of EMC instrumentation and systems for radiated and conducted interference in the automotive, consumer electronics, telecommunications, medical, aerospace and defense industries, acquired MILMEGA, Ltd in January 2012 and Instruments for Industry (IFI) in October 2012. The acquisitions extend Teseq's product ranges and expertise, further positioning them as a global leader in EMC testing.  Teseq has been accredited to perform calibration services according to ISO 17025 at its Edison, N.J. laboratory. Teseq is the only pulsed immunity manufacturer in North America with an accredited calibration lab. 

Editorial Contact:
The Simon Group, Inc.
Joanna Puglisi-Barley or Beth Smith
Phone: (215) 453-8700
E-mail: publicrelations@simongroup.com

SOURCE Teseq Inc.



RELATED LINKS
http://www.teseq.com

Custom Packages

Browse our custom packages or build your own to meet your unique communications needs.

Start today.

 

PR Newswire Membership

Fill out a PR Newswire membership form or contact us at (888) 776-0942.

Learn about PR Newswire services

Request more information about PR Newswire products and services or call us at (888) 776-0942.