R&M is now increasingly recommending that planners, investors, and network operators include the physical level of a network, i.e., the cabling, in the digitalization process from the outset. By this, R&M proposes that a full virtual profile should be stored for each network. The type, function, and status of every connector and cable should be recorded digitally and managed centrally, with control being fully automated via a web application. According to R&M, if this is not the case, it will become impossible to manage the increasing volume of network information and increasing number of network connections brought about by the ubiquitous Internet of Things, cloud services, and the growing demand for bandwidth. R&M's main market – the structured cabling market – alone is growing by about three percent every year. Hardware manufacturer Cisco estimates that 50 billion sensors will be connected to the Internet of Things by 2020, while chip manufacturer Intel predicts that, by 2030, some 200 billion items, appliances, devices, machines, and buildings will have an Internet connection. "Someone is going to have to manage all of these connections and devices," said Andreas Rüsseler. On this basis, R&M is expecting to see growing demand for integrated network solutions based on comprehensive planning that include the technology and software for digitalization, monitoring, and management, as well as cabling systems.
R&M already has an appropriate solution in the form of R&MinteliPhy. This network monitoring system monitors cabling across all distances and in all magnitudes, and also enables three-dimensional digital representation of the data center infrastructure. "We are gradually adding software and services to our cabling portfolio," explained Andreas Rüsseler. R&M is building up the expertise needed to be able to manage and support IT processes relating to infrastructure. The company is also working on further developments, with the aim of making the management of data networks more user-friendly.
R&M identifies data centers as the area where the greatest demand currently lies. "Hyperscale data centers spanning an area equal to football fields cannot be monitored manually. Spatially distributed data centers belonging to cloud providers and other companies also require fully automated infrastructure management (AIM) that can be managed centrally. This is exactly what is provided by R&MinteliPhy. This level of automation is only possible on the basis of a digital profile of the infrastructure," explained the CMO. R&M also sees its AIM solution – R&MinteliPhy – as a component of a superordinate data center infrastructure management (DCIM) system.
"Without digital planning, stocktaking, and online management of the entire data center, it is no longer possible for IT providers to present services with high availability. Detailed information and status updates in real time are an absolute requirement," said Andreas Rüsseler. In this regard, R&M advocates full and continuous monitoring that covers every level of data transmission, from the connector to the application. "What use is there in monitoring the higher layers of a network if somewhere a network connector has been disconnected or inserted incorrectly and nobody has noticed?" asked Andreas Rüsseler. With reference to market statistics, R&M points out that operational errors and other such faults at the passive network infrastructure level are behind more than half of all data center failures. The company believes that this problem alone is reason enough for real-time monitoring of cabling to be introduced. Causes of damages, delays, signal losses, and high consumption data can be identified quickly online by referring to the digital profile of a process or infrastructure.
AIM is indispensable from a business perspective, too, in that it makes it possible to view and analyze the life cycle status of assets in use at any time at the click of a mouse. Digital information about the infrastructure therefore becomes a key factor in success, proving essential to long-term value creation, strategic decision-making, and agile reactions to changes on the market, according to R&M. AIM facilitates universal planning, while also simplifying organization and business processes. The CMO pointed out that "These are the exact same areas identified by Capgemini as obstacles standing in the way of a digitized IT organization." Information on how to create digital profiles for network infrastructures is available in issue 51 of R&M's specialist magazine "Connections."
In the future, virtual profiles will also be created for building infrastructures in the same way as for data centers. Building information modeling (BIM) allows for continuous digitalization from the architect's initial drawing to the ongoing building management. Here, R&M has identified another growth market. Andreas Rüsseler said, "BIM makes it possible to create a virtual representation of every section of structured cabling from the serving area interface to the outlets. This provides a solid foundation for planning economically, detecting tampering immediately, simulating changes, and carrying out efficient maintenance work on the local data network."
R&M (Reichle & De-Massari AG) is a leading global producer of future-proof products and systems for communication and data networks. The company's close collaboration with certified partners results in pioneering connectivity solutions in the sectors LAN, Public and Telecom Networks as well as Data Centers. The Swiss family company stands for innovation, quality, and proximity to customers. More information can be found at www.rdm.com
To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/building-and-network-infrastructures-require-digital-twins-300400411.html
SOURCE R&M USA Inc.