MOUNTAIN VIEW, Calif., Oct. 10, 2016 /PRNewswire/ -- CEVA, Inc. (NASDAQ: CEVA), the leading licensor of signal processing IP for smarter, connected devices, today introduced a new lightweight, multi-purpose, processor IP core to streamline the design of cellular-enabled low data rate industrial and consumer loT devices. The CEVA-X1 IoT processor deploys a single-core DSP+CPU architecture, specifically designed to address the severe size, power and cost limitations demanded for deploying the latest LTE Cat-M1 (formerly eMTC) and Cat-NB1 (formerly NB-IoT) standards as well as future FeMTC and 5G cellular IoT use cases.
The connected cellular IoT market is expected to explode in the coming years, with ABI Research predicting the Cat-NB1 standard will account for more than one third of all cellular IoT shipments - a value which is greater than legacy M2M or the current Cat-1 standard. End markets and applications where these technologies will be deployed include the smart home, smart utilities, asset tracking, wearables, health, security and environmental, industrial and agricultural monitoring and control.
The CEVA-X1 also serves as a multi-purpose, multi-mode processing hub for a range of tightly-associated IoT workloads, including Wi-Fi 802.11n, 802.11ac, Bluetooth/BLE, Zigbee/Thread, LoRa, SIGFOX, narrowband voice, GNSS and sensor fusion. Crucially, the CEVA-X1 can handle multiple processing workloads simultaneously, allowing developers complete flexibility to tailor their system to meet the requirements of any IoT use case.
Will Strauss, President of Market Research Firm Forward Concepts, commented: "The 3GPP's recent launch of the Cat-M1 and Cat-NB1 standards paves the way for billions of IoT devices to connect via the cellular networks in the coming years. The CEVA-X1 IoT processor addresses the stringent power, cost and performance constraints of this new wave of low data rate devices, offering a compelling solution upon which to develop multi-mode IoT products for this burgeoning market."
The latest core derived from the NEW CEVA-X architecture framework, the CEVA-X1 employs an extended Instruction Set Architecture (ISA) that, in addition to DSP processing, also allows it to efficiently handle CPU software workloads, such as protocol stack and system control. Comparing EEMBC® CoreMark® scores, a commonly used benchmark to measure the performance of CPU processing in embedded systems, the CEVA-X1 CoreMark/MHz score of 3.3 is on par with the most commonly used CPU for IoT stacks - the ARM® Cortex™-M4 - which achieves a CoreMark/MHz score of 3.4. This effectively eliminates the requirement for a separate CPU core in the system when using the CEVA-X1, providing significant cost, power consumption and ease-of-programming benefits of a single-core approach.
The CEVA-X1 also enables further differentiation through CEVA-Connect, its advanced system control interface to offload the processor using dedicated control and data plane hardware, and automate traffic management between the CEVA-X1 and CEVA or customer proprietary hardware accelerators such as the Cat-M1 Turbo decoder.
Michael Boukaya, vice president and general manager, Wireless Business Unit at CEVA, commented: "The CEVA-X1 is a first-of-its-kind processor, custom designed to address the unique and diverse needs of connecting the IoT ecosystem. Our deep knowledge in cellular and wireless connectivity allowed us to develop the industry's lowest power processor for cellular IoT, and ensure outstanding performance for any other IoT related standard."
Illustrating the unique and flexible capabilities of the CEVA-X1 for low data rate, multi-purpose IoT devices, in a wearalone smartwatch use case, the complete Cat-NB1 modem including protocol stack and PHY running concurrently with GPS requires less than 150MHz, including ample headroom to handle additional functions such as sensor fusion. This exceptional performance is achieved using the CEVA-X1 together with optional dedicated Cat-NB1 instructions, optimized software libraries, protocol stacks and a peripherals subsystem which reduce the power consumption of the Cat-NB1 modem, excluding RF, by a further 30%.
The CEVA-X1 IoT processor and the optional dedicated Cat-NB1 components are available for licensing now. For more information on the CEVA-X1, visit http://launch.ceva-dsp.com/CEVA-X1.
About CEVA, Inc.
CEVA is the leading licensor of signal processing IP for a smarter, connected world. We partner with semiconductor companies and OEMs worldwide to create power-efficient, intelligent and connected devices for a range of end markets, including mobile, consumer, automotive, industrial and IoT. Our ultra-low-power IPs for vision, audio, communications and connectivity include comprehensive DSP-based platforms for LTE/LTE-A/5G baseband processing in handsets, infrastructure and machine-to-machine devices, computer vision and computational photography for any camera-enabled device, audio/voice/speech and ultra-low power always-on/sensing applications for multiple IoT markets. For connectivity, we offer the industry's most widely adopted IPs for Bluetooth (low energy and dual mode), Wi-Fi (802.11 a/b/g/n/ac up to 4x4) and serial storage (SATA and SAS). Visit us at www.ceva-dsp.com and follow us on Twitter, YouTube and LinkedIn.
To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/ceva-introduces-lightweight-multi-purpose-processor-for-the-massive-internet-of-things-300341635.html
SOURCE CEVA, Inc.