NEW YORK, Nov. 14, 2012 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:
Growth Opportunities in Global Composite Industry 2012-2017
http://www.reportlinker.com/p01029649/Growth-Opportunities-in-Global-Composite-Industry-2012-2017.html#utm_source=prnewswire&utm_medium=pr&utm_campaign=Plastic
Background:
After weathering the worldwide recession, the Global Composites market registered double-digit growth in 2010 due to the economic recovery. Although the pace of the market subsided in 2011, the market is expected to regain pace and reach $29.9 billion in 2017 with a CAGR of 5.4% over the next five years. Lucintel, a leading global management consulting and market research firm, has analyzed the Global Composites market and presents its findings in "Growth Opportunities in Global Composites Industry 2012-2017". Lucintel's research indicates that over the long term, the composites industry is a sustainable industry with 30,000 composites applications worldwide and holds strong growth potential. High performance at a lower weight is the major driving force for the selection of composite materials for various applications. Lucintel expects higher market fragmentation to occur due to emerging economies. The future of the market is expected to be highly competitive, and companies with innovative capabilities and products can thrive and gain market share. Material suppliers in the resin and glass fiber categories are expected to experience good sales growth in almost all market segments in 2012. The growth in carbon fiber demand is expected to outpace that of glass fiber. This growth in carbon fiber demand is expected to drive the market for epoxy resin because epoxy is predominantly used with carbon fiber. Lucintel's research indicates that the Asian region, which has already emerged as the largest growth area for the composites industry, is expected to further consolidate its leadership. North America is expected to be second followed by Europe. The aerospace, wind energy and marine markets are expected to grow steadily over the forecast period. The report, which provides trend scenarios and forecast statistics for 2012–2017, details industry drivers and challenges; provides competitive analysis between steel, aluminum, plastics, and the composites industry; examines global reinforcement and resin markets; highlights global composites market by material types and segments; offers regional and value chain analysis; identifies industry leaders; and also describes manufacturing processes. This report is a must-have report by every company working in the composites industry. In today's global economy, you need every advantage that you can find to keep you ahead in your business. Learn about current and future trends, identify key players, and explore the directions that the industry and different segments are heading.
Features of This Report:
To make any investment, business or strategic decisions, you need timely and robust market information. This market report fulfills this core need. This is an indispensable reference guide for composite material suppliers, product manufacturers, investors, researchers, engineers, distributors and many more, who are dealing with the composites industry. Some of the features of this market report are:
· Market size and growth rates of the global composites industry market. Market for FRP and advanced composites
· Global composite industry size in terms of value and volume
· Global composite industry trend and forecast in terms of value and volume
· Market size estimates for reinforcements and resins
· Market breakdown by application and region
· Composites market by country with growth potential in Indian and Chinese composite markets
· Competitive analysis between steel, aluminum, plastics and the composites industry
· Market breakdown by manufacturing technologies by Manufacturing process, by market segments by various material types
· Thermoset and Thermoplastic composites market size, trends and forecast
· Market outlook and global trends in automotive, marine, construction, aerospace and other important market segments with needs and challenges of various market segments
· Value chain analysis. Dollar and gross profit flow through of various nodes of the value chain (from raw material to final application)
· Material price and property comparison. Fiber and resin price history and forecast. Material prices of more than 100 materials such as fibers, resins, fabrics, prepregs, adhesives, and metals
TABLE OF CONTENTS
1. Executive Summary
2. About the Composites Industry
2.1: What is the composites industry?
2.2: Characteristics of the composites industry
3. Competitive Analysis between Steel, Aluminum, Plastics and the Composites Industry
3.1: Competitive analysis
3.2: Plastics industry overview
3.3: Steel industry overview
3.4: Aluminum industry overview
3.5; Composites industry overview
4. Global Reinforcement Market
4.1: Functions of fibers and resin materials in composites
4.2: Global composites market by fiber type
4.3: Global market size for reinforcements
4.3.1: Glass fiber market size by product forms
4.3.2: Carbon fiber market by product form
4.3.3: Aramid fiber market
4.4; Market Leaders
4.4.1: Glass fiber market leaders
4.4.2: Carbon fiber market leaders
4.4.3: Aramid fiber market leaders
5. Global Resin Market
5.1: Types of resins
5.1.1: Thermoset resins for the composites industry
5.1.2: Thermoplastic resins
5.2: Price and weight distribution of various ingredients in composites
5.2.1: Polyester resin applications
5.3: Resin Market
6. Global Composites Market by Material Type
6.1: Advanced composites market
6.2: Raw Materials Market
6.3: Thermoset and thermoplastic composites market
6.4: Thermoplastic composites market by product form
6.4.1: LFRT or LFT
6.4.2: GMT
6.4.3: Continuous Fiber TPCs
6.5: Composites market by molding compounds
7. Global Composites by Market Segments
7.1: Global composites market by segments
7.2: Driving forces for the use of composite materials
7.3: Key requirements in various market segments
7.4: Transportation industry market outlook and trend
7.4.1: Driving forces for the use of composites in automotive applications
7.4.2: Automotive industry goals and future directions
7.4.3: Automotive industry challenges
7.5: Aerospace and defense industry market outlook and trend
7.5.1: Evolution of composites usage in aerospace applications
7.5.2: Thermoplastic composites applications in aircraft structures
7.6: Construction industry's market outlook and trend
7.6.1: Composites in bridge applications
7.6.2: Challenges in bridge applications
7.6.3: Non-Bridge applications
7.7: Pipe and tank industry analysis
7.8: Marine market outlook and industry trend
7.9: Consumer goods
7.10: Electrical and electronic industry outlook
7.11: Wind energy
8. Global Composites Market by Manufacturing Processes
8.1: Global composites market by manufacturing processes
9. Trends and Forecasts
9.1: Industry challenges in recent years
9.1.1: The energy cost squeeze
9.1.2: The challenge to the glass fiber industry
9.1.3: Resin producers are relatively safe
9.1.4: Fabricators challenge
9.2: Trends in global composites industry
9.2.1: Market trends by Region
9.2.2: Market trends by Applications
9.3: Trends in North American composites industry
9.4: Trends in European composites industry
9.5: Trends in Asian composites industry
9.6: Composites industry forecast
9.6.1: Forecasts from the material suppliers' perspective
9.6.2: Forecasts from the OEM's / Molders' perspective
9.6.3: Forecast by region
9.6.4: Global forecast by applications
9.7: Forecast for North American composites industry
9.8: Forecast for European composites industry
9.9: Forecast for Asian composites industry
9.10: Forecast for composites manufacturing processes
10. Regional Analysis
10.1: Composites shipment by region
10.2: Composites consumption by countries
10.2.1: Shipment in North American countries
10.2.2: Shipment in European countries
10.2.3: Shipment in Asia-Pacific countries
10.3: Composites applications by region
10.3.1: Composite markets in North America
10.3.2: Composite markets in Europe
10.3.3: Composites markets in Asia-Pacific
11. Value Chain Analysis and Industry Leaders
11.1 Value chain analysis
11.2 Industry leaders
11.2.1 Industry leaders in material suppliers category
11.2.2 Leaders in end-use markets
12. Materials and Technology Needs for the Future Composites Industry
12.1: Need for low cost raw materials
12.2: Resins and fiber materials with higher strain to failure
12.3: Better UV and chemical resistant materials
12.4: Low cost manufacturing process for large and small parts
12.5: Need for high temperature composite material
12.6: Low shrinkage materials
12.7: Low wear and tear composite materials
12.8: Damping and noise resistance materials
12.9: Optimal resin and additive systems for closed molding operations
12.10: Products Manufacturability and Affordability
12.11: Flexible Gelcoats
12.12: Flame resistant materials
12.13: Self healing material
12.14: Manufacturing process with lower processing time
12.15: Flexible honeycomb core
12.16: Fabric wrinkling
12.17: Method of cutting wet prepregs
12.18: Need for moisture resistant honeycomb core
12.19: Fast cure epoxy resin
Table of Figures
Chapter 1. Executive Summary
Figure 1.1: Porter's Five Forces model for global composites industry from the
perspective of composite parts fabricators
Chapter 2. About the Composites Industry
Figure 2.1: Classification of raw materials
Figure 2.2: Schematic flow chart on global composites industry
Chapter 3. Competitive Analysis between Steel, Aluminum, Plastics and the Composites
Industry
Figure 3.1: Global shipments - competing material 2003 - 2011
Figure 3.2: Percentage distribution of competing materials in the global industry in 2011
Figure 3.3: US domestic shipments by material type from 2006-2011
Figure 3.4: Percentage distribution of competing materials in the US industry in 2011
Figure 3.5: Amount of steel, aluminum, plastic and composites shipment on a weight
basis for the US industry in 2011
Figure 3.6: Composites market potential in various market segments in 2011
Figure 3.7: Global plastic shipment 2006-2011
Figure 3.8: The US plastics industry total sales and captive use by type of resins
Figure 3.9: Plastics industry shipment distribution by type of resins.
Figure 3.10: The US Thermoplastic shipment by market in 2011
Figure 3.11: Global steel shipment 2006-2011
Figure 3.12: Steel industry breakdown by major segments in 2011
Figure 3.13: Global primary aluminum shipments
Figure 3.14: Global aluminum shipment by market
Chapter 4. Global Reinforcement Market
Figure 4.1: Global composites market distribution by fiber type in 2011
Figure 4.2: Global composites shipment by fiber type in 2011
Figure 4.3: Fiber market distribution in 2011 in global composites industry on weight
basis
Figure 4.4: Fiber market shipment in 2011 in global composites industry on weight basis
Figure 4.5: Fiber market distribution for global composites industry in terms of $ M
shipment in 2011
Figure 4.6: Fiber shipment in terms of $ M in global composites industry in 2011
Figure 4.7: Composites applications by reinforcement form
Figure 4.8: Global fiberglass distribution by type of product form in 2011
Figure 4.9: Fiberglass distribution by type of product form in 2011
Figure 4.10: Percentage distribution of carbon fiber by precursor in terms of M lbs
Figure 4.11: Percentage distribution of carbon fiber by precursor in terms of $ M
Figure 4.12: Percentage distribution of carbon fiber by tow size in terms of M lbs
Figure 4.13: Growth trend in the carbon fiber market in terms of lbs shipments (2006-
2011)
Figure 4.14: Growth trend in the carbon fiber market in terms of $ Mil shipments (2006-
2011)
Chapter 5. Global Resin Market
Figure 5.1: Schematic representation of uncured polyester resin
Figure 5.2: Schematic representation of cured polyester resin
Figure 5.3: Schematic representation of uncured vinyl ester resin
Figure 5.4: Schematic representation of cured vinyl ester resin.
Figure 5.5: Global composites market distribution (M lbs) by thermoset and thermoplastic
resin composites in 2011
Figure 5.6: Global composites market shipment (M lbs) by thermoset and thermoplastic
resins in 2011
Figure 5.7: Global composites market distribution ($ M ) by thermoset and thermoplastic
resin composites in 2011
Figure 5.8: Global composites market shipment ($ M) by thermoset and thermoplastic
resins in 2011
Figure 5.9: Global composites market breakdown by resin type in 2011
Figure 5.10: Global thermoset composites market breakdown by resin type in 2011
Figure 5.11: Global resin consumption (M lbs) by resin type in 2011
Figure 5.12: Global resin shipment ($ M) by resin type in 2011
Chapter 6. Global Composites Market by Material Type
Figure 6.1: Advanced composites market share in global composites industry in 2011
Figure 6.2: Advanced composites market size (M lbs) in global composites industry in
2011.
Figure 6.3: Advanced composites market distribution ($ shipment) in global composites
industry in 2011
Figure 6.4: Advanced composites market size ($ M) in global composites industry in 2011
Figure 6.5: Raw material shipment (M lbs) in global composites industry in 2011
Figure 6.6: Global composites market breakdown (%) by raw materials used in 2011
Figure 6.7: Raw material shipment ($ M) in global composites industry in 2011
Figure 6.8: Global composites market breakdown (%, $ M) by raw materials used in
2011.
Figure 6.9: Global composites market distribution by thermoset and thermoplastic resin
composites in 2011.
Figure 6.10: Global composites market shipment (M lbs) by thermoset and thermoplastic
Figure 6.11: Global composites market shipment ($ M) by thermoset and thermoplastic
resins in 2011
Figure 6.12: Global thermoplastic composites market distribution by product form in 2011
Figure 6.13: Global thermoplastic composites market shipment (M lbs) by material type in
2011
Figure 6.14: Global thermoplastic composites market distribution by $ shipment
Figure 6.15: Global thermoplastic composites market shipment ($ M) by material type in
2011
Figure 6.16: Global composites market distribution by material form in 2011
Figure 6.17: Global composites market shipment (M lbs) by material form in 2011
Figure 6.18: Global composites market shipment ($ M) by material form in 2011
Chapter 7. Global Composites by Market Segments
Figure 7.1: Major OEMs/Molders in various market segments
Figure 7.2: Global composites distribution (%, M lbs) in 2011 by end use application.
Figure 7.3: Global composite shipments by application in 2011. Total shipment was
estimated at billion lbs
Figure 7.4: Global composites distribution (%, $ M) shipment in 2011 by end use
application
Figure 7.5: Global composite shipments ($ M) by applications in 2011
Figure 7.6: Composite materials shipment by region. Total shipments were 14.3 billion
lbs
Figure 7.7: Composites shipment (M lbs) by regions in the year 2011
Figure 7.8: Cost vs. performance criteria in various industries for composites usage
Figure 7.9: Composites distribution in the global transportation industry in 2011
Figure 7.10: Composites shipment (M lbs) in the global transportation industry in 2011
Figure 7.11: Composites distribution by region in the transportation industry in 2011
Figure 7.12: Composites shipment by region in the transportation industry in 2011
Figure 7.13: Trends (1991-2010) in total US light vehicle sales (in M of units)
Figure 7.14: Trends (1991-2010) in segmented US light vehicle sales (in thousands of
units)
Figure 7.15: Trend in composites shipment in global automobiles (2006-2011)
Figure 7.16: Fig. 7.16 BMW body structure (Source BMW)
Figure 7.17: BMW 2011 i3 (Source BMW)
Figure 7.18: Chevrolet's 2008 Corvette ZR1 (source Chevrolet)
Figure 7.19: Composite cargo box of Honda's pickup truck – (source Ridgeline)
Figure 7.20: Manufacturing process breakdown for the global transportation industry in
2011
Figure 7.21: Composites shipment (M lbs) by manufacturing process for the
transportation industry in 2011.
Figure 7.22: Classification of aerospace market according to aircraft type
Figure 7.23: Composites distribution in the global aerospace industry in 2011
Figure 7.24: Composites shipment (M lbs) in the global aerospace industry in 2011
Figure 7.25: Composites distribution by region in the aerospace industry in 2011
Figure 7.26: Composites consumptions by region in aerospace industry in 2011
Figure 7.27: Evolution of composites applications in commercial aircraft
Figure 7.28 Different composite material systems in the Boeing 777
Figure 7.29: Material distributions in the Airbus A340 for buy and fly cases
Figure 7.30: Trend in total $ shipment in global aerospace market
Figure 7.31: Trend in total number of aircraft deliveries by Boeing and Airbus in
commercial aerospace market.
Figure 7.32: Order vs. delivery of aircrafts by Boeing (2002-11)
Figure 7.33: Order vs. delivery of aircrafts by Airbus (2002-11)
Figure 7.34: Composites distribution in the global construction industry in 2011
Figure 7.35: Composites shipment (M lbs) in the global construction industry in 2011
Figure 7.36: The construction industry by region in 2011
Figure 7.37: Composites shipments in the construction industry by region in 2011
Figure 7.38: The US Housing starts (1978-2011)
Figure 7.39: Trend in annual new home average prices in the US
Figure 7.40: Construction activity in EU (27) (2000-2011)
Figure 7.41: Corrosion market breakdown by type of applications
Figure 7.42: Percent comparison of petroleum tank shipments by construction material in
North America.
Figure 7.43: Percent comparison of septic tank shipments (in terms of number) by
construction material in North America
Figure 7.44: Percentage distribution of sewage pipe market by type of material
Figure 7.45: Percentage distribution of oil and gas pipe market by type of material
Figure 7.46: Composites distribution in the global pipe & tank industry in 2011
Figure 7.47: Composites shipment (M lbs) in the global pipe & tank industry in 2011
Figure 7.48: The pipe & tank industry by region in 2011
Figure 7.49: Composites shipments in pipe & tank industry by region in 2011
Figure 7.50: Composites in the marine industry in 2011
Figure 7.51: Composites shipments in the marine industry in 2011
Figure 7.52: Composite materials distribution by region in the marine industry in 2011
Figure 7.53: Composites shipment by region in the marine industry in 2011
Figure 7.54: US recreational boating domestic boat unit shipment trends (1997 to 2010).
Figure 7.55: Personal watercraft (PWC) market trend (1997-2010)
Figure 7.56: Trend in regional shipment of composites in marine industry
Figure 7.57: Composites distribution in consumer goods market in 2011
Figure 7.58: Composites shipment in consumer goods industry in 2011
Figure 7.59: Composites distribution by region in consumer goods industry
Figure 7.60: Composites shipment (M lbs) by region in consumer goods industry in 2011
Figure 7.61: Composites distribution in electrical/electronic industry
Figure 7.62: Global composites shipment in electrical/electronic industry in 2011
Figure 7.63: Composites distribution by region in electrical/electronic industry
Figure 7.64: Composites shipment by region in electrical/electronics industry in 2011
Figure 7.65: Composites distribution in wind energy
Figure 7.66: Composites shipment (M lbs) in wind energy
Figure 7.67: Composites distribution by region in wind energy industry
Figure 7.68: Trend in composites shipment in global wind energy (2006-2011)
Figure 7.69: Composites shipment in wind energy market in 2011
Figure 7.70: Increase in wind energy capacity installations
Chapter 8. Global Composites Market by Manufacturing Processes
Figure 8.1: Classification of composite processing techniques
Figure 8.2: Global composites distribution (M lbs) by manufacturing processes in the year
2011
Figure 8.3: Global composites shipment (M lbs) by manufacturing processes in the year
2011
Figure 8.4: Global composites distribution ($ M) by manufacturing processes in the year
2011
Figure 8.5: Global composites shipment ($ M) by manufacturing processes in the year
2011
Figure 8.6: Hand lay-up and spray-up process distribution by applications in 2011
Figure 8.7: Hand lay-up and spray up process shipment (M lbs) by applications in 2011
Figure 8.8: SMC/BMC molding distribution by applications in 2011
Figure 8.9: SMC/BMC molding shipment (M lbs) by applications in 2011
Figure 8.10: Pultrusion process distribution by applications in 2011
Figure 8.11: Pultrusion process shipment (M lbs) by applications in 2011
Figure 8.12: Market distribution of global composites industry by open and closed
molding processes in 2011
Figure 8.13: Volume shipment in open and closed molding processes in 2011
Figure 8.14: Market distribution of thermoset composites industry by open and closed
molding processes in 2011
Figure 8.15: Market distribution of global composites industry by open and closed
molding processes in 2011
Chapter 9. Trends and Forecasts
Figure 9.1: Global composites market growth trends (2006-2011)
Figure 9.2: Comparative regional growth rates in composites industry in 2010 & 2011
Figure 9.3: Increase in wind energy capacity installations
Figure 9.4: Personal watercraft (PWC) market trend (1997-2010).
Figure 9.5: Composites market growth trends by regions (2006-2011).
Figure 9.6: Global composites market by region in 2006.
Figure 9.7: Global composites market (M lbs) by region in 2011.
Figure 9.8: Global composites market (US$ M) by region in 2011.
Figure 9.9: Comparative growth in composites shipment (M lbs) in various regions during
last year.
Figure 9.10: Growth rates in various market segments of the global composites industry
in 2011.
Figure 9.11: Average annual growth rates in various market segments of the global
composites industry in last 5 years (2006-2011).
Figure 9.12: North American composites shipment (M lbs) by year.
Figure 9.13: Growth rates in various market segments of North American composites
industry in 2011.
Figure 9.14: Average annual growth rates in various market segments of the North
American composites industry in last 6 years (2006-2011).
Figure 9.15: US composites shipment trends by market segments (1970-2011).
Figure 9.16: Growth rate in various market segments in European composites market
Figure 9.17: Average annual growth rates in various market segments of the European
composites industry in last 5 years (2006-2011).
Figure 9.18: Growth rate in various market segments in Asian composites market
Figure 9.19: Average annual growth rates in various market segments of the Asian
composites industry in last 5 years (2006-2011).
Figure 9.20: Regional leadership in composites shipment in various market segments in
2010
Figure 9.21: Regional leadership in composites shipment in various market segments in
2011
Figure 9.22: External forces shaping the composites industry.
Figure 9.23: Consumer spending by year for the US. (1996 – 2011)
Figure 9.24: Quarterly consumer sentiment (US) for the period 2005-2011. (Source:
Michigan University)
Figure 9.25: Trend and forecast (1993 -2014) in the US GDP
Figure 9.26: Comparative GDP growth in major regions
Figure 9.27: Global composites market forecast (2012-2017)
Figure 9.28: Global composites market forecast by region (2012-2017)
Figure 9.29: Global composites distribution (M lbs) by region in 2017
Figure 9.30: Global composites distribution (US$ M) by region in 2017
Figure 9.31: Global composites shipment by region in 2017
Figure 9.32: Growth opportunities in various market segments (2012-2017)
Figure 9.33: Opportunities for composite products in various market segments
Figure 9.34: Growth forecast in global composites shipment by market segments in 2012
Figure 9.35: Average annual growth forecast in next 5 years (2012-2017) in global
composites shipment by market segments.
Figure 9.36: Global composites shipment (M lbs) by market segment in 2012
Figure 9.37: Global composites shipment (M lbs) by market segment in 2017
Figure 9.38: Global composites shipment ($ M) by market segment in 2017
Figure 9.39: Growth forecast in North American composites shipment by market
segments in 2012
Figure 9.40: Average annual growth forecast in next 5 years (2012-2017) in North
American composites industry by market segments
Figure 9.41: North American composites shipment (M lbs) by market segments in 2012
Figure 9.42: North American composites shipment (M lbs) by market segments in 2017
Figure 9.43: North American composites shipment ($ M) by market segments in 2017
Figure 9.44: Growth forecast in European composites shipment by market segments in
2012
Figure 9.45: Average annual growth forecast in next 5 years (2012-2017) in European
composites shipment by market segments
Figure 9.46: European composites shipment (M lbs) by market segments in 2012
Figure 9.47: European composites shipment (M lbs) by market segments in 2017
Figure 9.48: European composites shipment (US$ M) by market segments in 2017
Figure 9.49: Growth forecast in Asian composites shipment by market segments in 2012
Figure 9.50: Average annual growth forecast in next 5 years (2012-2017) in Asian
composites shipment by market segments
Figure 9.51: Asian composites shipment (M lbs) by market segments in 2012
Figure 9.52: Asian composites shipment (M lbs) by market segments in 2017
Figure 9.53: Asian composites shipment (M lbs) by market segments in 2017
Figure 9.54: Open and closed molding distribution in 2011
Figure 9.55: Open and closed molding distribution in 2017
Figure 9.56: Global composites shipment by open and closed molding process in 2017
Figure 9.57: Global composites distribution (%) by manufacturing processes in 2017
Figure 9.58: Global composites shipment (M lbs) by manufacturing processes in 2017
Figure 9.59: Global composites distribution (%, US$ M) by manufacturing processes in
2017
Figure 9.60: Global composites shipment (US$ M) by manufacturing processes in 2017
Chapter 10. Regional Analysis
Figure 10.1: Global composites market by region in 2011
Figure 10.2: Global composites market shipment by region in 2011
Figure 10.3: Comparative global composites market shipment in 2011 vs. 2010
Figure 10.4: Regional breakdown of composites in various market segments in 2011
Figure 10.5: Composites market percentage distribution by leading countries
Figure 10.6: Composites shipment (M lbs) by top 10 leading countries of the world in
2011
Figure 10.7: Composites (lbs) per capita for top 10 leading countries of the world in 2011
Figure 10.8: Composites potential for top 10 leading countries of the world
Figure 10.9: Composites shipment distribution (%) in North American countries in year
2011
Figure 10.10: Composites shipment (M lbs) in North American countries in year 2011
Figure 10.11: Composites shipment distribution in western European countries in year
2011
Figure 10.12: Composites shipment in European countries in year 2011
Figure 10.13: Composites (lbs) per capita in European countries in year 2011
Figure 10.14: Composites shipment distribution in Asia-Pacific countries in year 2011
Figure 10.15: Composites shipment in Asia-Pacific countries in year 2011
Figure 10.16: Composites (lbs) per capita in Asia-Pacific countries in year 2011
Figure 10.17: Composites market distribution by applications in North America in 2011
Figure 10.18: Composites shipment (M lbs) in various applications in North America in
2011
Figure 10.19: Composites shipment ($ M) in various applications in North America in
2011
Figure 10.20: Composites market distribution by applications in Europe in 2011
Figure 10.21: Composites shipment (M lbs) in various applications in Europe in 2011
Figure 10.22: Composites shipment ($ M) in various applications in Europe in 2011
Figure 10.23: Composites market distribution by applications in Asia in 2011
Figure 10.24: Composites shipment (M lbs) in various applications in Asia in 2011
Figure 10.25: Composites shipment ($ M) in various applications in Asia in 2011
Chapter 11. Value Chain Analysis and Industry Leaders
Figure 11.1: Value chain for the composites industry
Figure 11.2: Global composites market breakdown (M lbs) by raw materials used in 2011
Figure 11.3: Raw materials ($ M) shipment in global composites industry in 2011
Figure 11.4: Dollar ($) and gross profit flow chart through various nodes of the value
chain (from raw material to the end product).
Figure 11.5: Gross profit ($ M) in raw materials (reinforcement and resins) market in
2011.
Figure 11.6: Gross profit distribution (%) by type of raw materials (fiberglass, carbon,
polyester, and epoxy) market in 2011.
Figure 11.7: Market distribution (%) by value ($) of the end product.
Figure 11.8: Size ($ billion) of various market segments by value of composite products in
2011.
Figure 11.9: Gross profit ($ M) in various market segments
Figure 11.10: Gross profit distribution (%) by type of market segments
List of Tables
Chapter 1. Executive Summary
Table 1.1: Global composites market parameters and attributes – materials perspective
Table 1.2: Global composites market parameters and attributes – end product market
perspective
Chapter 3. Competitive Analysis between Steel, Aluminum, Plastics and the Composites
Industry
Table 3.1: Composites penetration in various market segments
Table 3.2: Plastic materials shipment for US domestic market
Chapter 6. Global Composites Market by Material Type
Table 6.1: Global composites shipment by raw material type in 2011
Chapter 7. Global Composites by Market Segments
Table 7.1: Impact properties of some selected materials
Table 7.2: Application of composite materials in the automotive industry
Table 7.3: Segmented US light vehicle sales (in thousands of units)
Table 7.4: Applications of composite materials in aerospace structures
Table 7.5: Evolution of composite material applications at Airbus
Table 7.6: Aerospace structures made of composites
Table 7.7: Selected materials and processes for the Airbus A380
Table 7.8: Composite components in aircraft applications
Table 7.9: Structural fabric repair system
Table 7.10: Top 10 countries with top 3 wind energy manufacturers
Chapter 8. Global Composites Market by Manufacturing Processes
Table 8.1: Ranking of manufacturing processes based on annual shipment
Chapter 9. Trends and Forecasts
Table 9.1: Market trends (2006-2011) in global composites shipment
Table 9.2: Average growth rates for 1, 10, 20, 30 and 40 years in the US composites
industry
Table 9.3: Average annual growth rates in various regions of the global composites
industry
Table 9.4: Market size and annual growth rates in various segments of global composites
industry
Table 9.5: Market size and annual growth rates during last 5 years (2006-2011) in various
market segments of global composites industry
Table 9.6: Market trends (2006-2011) in North American composites shipment
Table 9.7: Average annual growth rates during last 10, 20, 30, and 40 years (1970-2010)
in various market segments of the US composites industry
Table 9.8: GDP and unemployment rate for leading countries
Table 9.9: Interest and exchange rates for leading countries
Table 9.10: Forecast for select markets
Table 9.11: Average annual growth forecasts in various regions of the global composites
industry (2012-2017)
Table 9.12: Market size and annual growth forecasts during the next 6 years (2012-2017)
in various market segments of the global composites industry
Chapter 10. Regional Analysis
Table 10.1: Average annual growth rates in various regions of the global composites
industry
Table 10.2: Ranking of top 10 countries of world in terms of composites shipment
Table 10.3: Ranking of 5 leading countries in Europe in terms of composites shipment
Table 10.4: Ranking of 5 leading countries in Asia-Pacific in terms of composites
shipment
Table 10.5: Ranking of 5 leading applications in North American composites industry
Table 10.6: Ranking of 6 leading market segments in the European composites industry
Table 10.7: Ranking of 5 leading applications in Asia-Pacific region
Chapter 11. Value Chain Analysis and Industry Leaders
Table 11.1: Financial results of industry leaders in the material supplier category
Table 11.2: Financial results of industry leaders in various market segments
Table 12.1: Impact properties of some selected materials
Chapter 12. Materials and Technology Needs for the Future Composites Industry
Table 12.1: Impact properties of some selected materials
Table 12.2: Maximum continuous use temperatures for various thermosets and
thermoplastics
To order this report:
Plastic Industry: Growth Opportunities in Global Composite Industry 2012-2017
Nicolas Bombourg
Reportlinker
Email: [email protected]
US: (805)652-2626
Intl: +1 805-652-2626
SOURCE Reportlinker
WANT YOUR COMPANY'S NEWS FEATURED ON PRNEWSWIRE.COM?
Newsrooms &
Influencers
Digital Media
Outlets
Journalists
Opted In
Share this article