High-performance OEM LVDT/RVDT Signal Transmitter for Industrial Applications Available from Measurement Specialties Compact, open PC board design facilitates ease of installation

HAMPTON, Va., June 3, 2014 /PRNewswire/ -- Measurement Specialties (NASDAQ: MEAS), an expert in sensor design and manufacturing, has developed a compact OEM signal conditioning transmitter designed for high performance across a wide temperature range of -25 degrees C to +85 degrees C.  The new LiM-420 operates on an 18 VDC to 30 VDC unipolar supply voltage and delivers a low noise 4 mA to 20 mA current output signal.

Logo - http://photos.prnewswire.com/prnh/20140603/93802

The new transmitter is compatible with many LVDT or RVDT transducers with five and six electrical connections and even with low input impedance. This makes the LiM-420 ideal for many general industrial applications such as valve position feedback, roller gap sensing, material testing machines and many others. 

An easily-accessed DIP switch enables six selectable gain ranges while two 20-turn potentiometers allow for fine zero and gain adjustments for exact calibration. 

The generous excitation drive current of 20 mA enables the board to operate with transducer impedances as low as 175 Ohms.  Non-linearity is +/-0.05% of Full Scale Output and stability is also +/-0.05% of FSO after a 30-minute warm up. The board features a maximum supply current of 50 mA and a maximum loop resistance of 500 Ohms (with a 24 VDC supply).  The maximum output noise and ripple is only 25 micro Amps RMS.

The LiM-420 can be either plugged directly into a backplane-style connector using the built-in card-edge guides or wired to the screw terminal barrier strip.  The board can be mounted or stacked using the permanently-attached threaded standoffs or the card-edge guides.

Technical Specifications:

  • Current output, LVDT/RVDT OEM signal transmitter
  • High operating temperature: -20 degrees C to +85 degrees C
  • 18 VDC to 30 VDC unipolar supply voltage
  • Output noise and ripple: 25 micro Amps RMS maximum
  • Frequency response: 50 Hz at -3 dB
  • Six selectable gain ranges
  • Two multi-turn zero and gain adjustment potentiometers

For more information, email sales@meas-spec.com or visit http://meas-spec.com/product/position/LiM_4-20.aspx.

For high res download and full text:
http://www.simongroup.com/PressRoom/press-release.php?Job=MEA-A-3375

Follow us on LinkedIn: https://www.linkedin.com/company/measurement-specialties-inc

UPCOMING TRADESHOW:  Sensor + Test 2014; Stand 12-278; June 3-5, 2014; Nuremburg, Germany

READER SERVICE INQUIRIES:  Please direct all product inquiries to Bob Arkell, NA Marketing Manager; bob.arkell@meas-spec.com; 760-466-7614.

EDITOR'S NOTE:  Measurement Specialties, Inc. (NASDAQ: MEAS) designs and manufactures sensors and sensor-based systems to precisely and cost-effectively measure a number of physical characteristics in several markets from military and defense to medical, consumer and industrial. 

By accurately measuring areas such as pressure, temperature, position, level, tilt, force, vibration, torque, humidity, fluid properties, mass airflow and photo optics, our sensors enhance product functionality, efficiency and safety.

Our devices are embedded by original equipment manufacturers (OEMs) or used as stand-alone sensors for test and measurement to provide critical monitoring, feedback and control input.  MEAS also offers extensive sensor customization services ranging from special calibrations and connectors to custom label designs.

Editorial Contact:
The Simon Group, Inc.
Beth Smith or Joanna Puglisi-Barley
Phone: (215) 453-8700
E-mail: publicrelations@simongroup.com

SOURCE Measurement Specialties, Inc.




Custom Packages

Browse our custom packages or build your own to meet your unique communications needs.

Start today.

 

PR Newswire Membership

Fill out a PR Newswire membership form or contact us at (888) 776-0942.

Learn about PR Newswire services

Request more information about PR Newswire products and services or call us at (888) 776-0942.