Microsemi and Sibridge Technologies Collaborate to Develop Portfolio of High-speed Protocol IPs for SmartFusion2 and IGLOO2 FPGAs

ALISO VIEJO, Calif. and SANTA CLARA, Calif., June 2, 2015 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, and Sibridge Technologies, a leading provider of design and verification IPs, with expertise in ASIC/SoC design, verification and embedded solutions, today announced the release of a suite of high-speed IP cores targeting Microsemi's SmartFusion®2 SoC FPGAs and IGLOO®2 FPGAs.

This extends Microsemi's prior engagement with Sibridge Technologies by adding Sibridge as an approved CompanionCore provider. The CompanionCore program offers a wide selection of synthesizable IP cores that are licensed, supported and maintained directly by Microsemi partners.

"Partnering with Sibridge Technologies provides us access to a comprehensive portfolio of design IPs, verification IPs and custom solutions," said Shakeel Peera, senior director of FPGA/SoC marketing for Microsemi. "Sibridge Technologies enables our customers to develop high-speed interface designs by providing and integrating IP cores in designs and verifying multiple instances in a timely and cost-effective manner."

Microsemi has previously collaborated with the company by utilizing its triple-speed Ethernet media access controller (MAC), USB2.0 OTG controller, as well as PCI Express IP and verification IP suites from Sibridge Technologies, for Microsemi's highly successful SmartFusion2 and IGLOO2 FPGA families. Sibridge Technologies is now working to add support for USB3.0 host and device controller, 10 gigabit Ethernet MAC, SATA Gen 1/2 host and device controllers, CAN2.0 network controller, and eMMC host controller for Microsemi FPGAs as part of Microsemi's CompanionCore program.

"Microsemi has been our strategic customer for multiple years now. Our teams have optimized multiple cores for Microsemi devices, streamlining the design process, shortening time-to-market, and reducing design costs and risks," said Rajesh Shah, CEO, Sibridge Technologies. 

Sibridge Technologies provides value based services and solutions in the ASIC/FPGA and embedded space. The company has enabled more than 50 customers in the semiconductor and product development space. Microsemi previously adopted Sibridge Technologies' IP portfolio for customer engagement and now these cores, listed on Microsemi website, are proven, pre-built IP cores optimized for use in Microsemi devices and tools. For more information, visit http://www.microsemi.com/products/fpga-soc/design-resources/partners/sibridge-technologies.

Microsemi's SmartFusion2 SoC FPGAs
SmartFusion2 SoC FPGAs integrate inherently reliable flash-based FPGA fabric, a 166 megahertz (MHz) ARM Cortex-M3 processor, advanced security processing accelerators, DSP blocks, SRAM, eNVM and industry-required high performance communication interfaces, all on a single chip. Microsemi's SmartFusion2 SoC FPGAs are designed to address fundamental requirements for advanced security, high reliability and low power in critical communications, industrial, defense, aviation and medical applications.

Microsemi's IGLOO2 FPGAs
Microsemi's IGLOO2 FPGAs continue the company's focus on addressing the needs of today's cost-optimized FPGA markets by providing a LUT based fabric, 5Gbps transceivers, high speed GPIO, block RAM, a high-performance memory subsystem, and DSP blocks in a differentiated, cost and power optimized architecture. This next generation IGLOO2 architecture offers up to five times more logic density and three times more fabric performance than its predecessors and combines a non-volatile flash based fabric with the highest number of general purpose I/Os, 5Gbps SERDES interfaces and PCI Express end points when compared to other products in its class. IGLOO2 FPGAs offer best-in-class feature integration coupled with the lowest power, highest reliability and most advanced security in the industry.

Sibridge Technologies Design IP Portfolio
Sibridge Technologies offers a portfolio of silicon-proven design IP for industry-standard interfaces, including USB3.1/3.0/2.0 with PIPE/SSCI/HSIC/ULPI/UTMI interfaces, PCI Express Gen1/Gen2/Gen3, Ethernet 10M/100M/1G/10G with IEEE1588v2, AVB, EEE and various interfaces, SATA-I/II/III, CAN 2.0 FD, PATA, DDR2/3, PCMCIA, I2C, UART, SPI.   

Sibridge Technologies Verification IP Suite
Sibridge Technologies offers a suite of Verification IP for industry-standard interfaces, including PCI Express Gen1/Gen2/Gen3/Gen4, Ethernet 10M/100M/1G/10G/40G/100G, USB 2.0/3.0/3.1, MIPI MPHY®/DPHY/CSI-2/CSI-3/DSI/UFS, SSIC, SATA I/II/III, AMBA2-AHB/APB, AMBA3/4-AXI, CAN 2.0, I2C, UART, SPI.

About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif, and has approximately 3,600 employees globally. Learn more at www.microsemi.com.

About Sibridge Technologies
Sibridge Technologies provide innovative value-added IP-based solutions for design, verification, and embedded systems development to worldwide semiconductors and electronic product companies. The company offers a unique blend of three critical components in the development of SoCs: design and verification IP portfolios; strong chip design, integration, and verification expertise; embedded systems, hardware & software design and validation for streaming media, wireless, and networking applications. The company is based in Santa Clara, CA and has additional design centers in Ahmedabad and Bengaluru in India. For more information, please contact [email protected] or visit http://www.sibridgetech.com.

Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.

"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to the release of a suite of high-speed IP cores targeting Microsemi's SmartFusion2 SoC FPGAs and IGLOO2 FPGAs and the collaboration with Sibridge Technologies, and the potential effect of the foregoing on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.

Logo - http://photos.prnewswire.com/prnh/20110909/MM66070LOGO

 

SOURCE Microsemi Corporation; Sibridge Technologies

Related Links

http://www.microsemi.com