ALISO VIEJO, Calif., Dec. 14, 2015 /PRNewswire/ -- Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced it has quadrupled the Precision Time Protocol (PTP) client capacity of its TimeProvider® 2700 PTP grandmaster (GM) clock and TimeProvider 2300 edge master clock that provides synchronization to LTE networks. The device now provides simultaneous hardware time stamping support of up to 512 PTP clients, resulting in a significant cost benefit using a single GM clock. In addition, the clock now provides ITU Telecommunication Standardization Sector (ITU-T) G.8275.1 PTP phase profile support to address stringent synchronization requirements.
Microsemi's enhanced TimeProvider 2700/2300 clocks raise the bar for client capacity available from a single PTP GM device targeted at the LTE market, offering increased client capacity from 128 PTP clients to 512 PTP clients. The additional G.8275.1 PTP phase profile support has been enabled with a new software update, which is ideal for customers in the communications market seeking to upgrade their LTE networks with the latest synchronization capabilities. Both upgrades are available on new as well as deployed TimeProvider 2700/2300 clocks, without additional hardware.
"As a market leader delivering high value PTP grandmaster clocks, we are pleased to announce our higher client capacity, which further facilitates ease of deployment for our TimeProvider 2700/2300 clocks with significantly improved scalability and future network growth capabilities for customers," said Barry Dropping, director of product management for Microsemi's Frequency & Timing division. "The additional G.8275.1 PTP profile for phase not only increases flexibility and utility, but is also supported by our timing PTP chipsets, complementing Microsemi's other product offerings to deliver complete end-to-end timing solutions."
Microsemi's 512 PTP client capacity capabilities meet the evolving client density requirements as LTE networks scale up with the ever-increasing base station and small cell deployments worldwide. Microsemi's devices can manage the increased client count at full PTP message rate, resulting in no potential compromise in end-to-end accuracy which can be the case with alternative solutions that limit the PTP timing message rates at higher client counts. With more Microsemi customers now requiring support for the G.8275.1 PTP profile for phase as they plan for LTE-TDD and LTE-A network deployments, the company's latest enhancement for the TP2300/2700 family will help ensure their networks are well-equipped for continued growth.
According to the Global Mobile Suppliers Association (GSA), 79 carriers in total have launched, deployed or are trialing LTE Advanced technologies in their networks. The GSA also said 21 operators have launched LTE Advanced carrier aggregation in 14 countries. With IEEE 1588 solutions deployed globally in more than 350 networks, and the company's SyncWorld® Ecosystem Program, Microsemi is committed to delivering the industry's most comprehensive synchronization solutions for these 4G/LTE networks.
Microsemi's TimeProvider series features the industry's first offering of optimized synchronization solutions that deliver precise time from the core to the network edge, supporting the rapid transition to Ethernet mobile backhaul, and improving the mobile service experience for end users. With full support of International Telecommunications Union (ITU) approved PTP profiles for frequency and phase synchronization, and superior client capacity scalability, the TimeProvider series enables wireless operators to seamlessly migrate their networks forward to assure high quality service for LTE and small cell deployments.
About Microsemi's Carrier Class PTP Clock Portfolio
Microsemi builds the leading-edge embedded IEEE 1588 PTP slave clocks and boundary clocks designed into a wide range of base stations, small cells and PTP aware switching equipment. End-to-end synchronization management of all clocks is completed with Microsemi's TimePictra software, which now extends beyond Microsemi clocks to include supporting the monitoring of third party PTP slave clocks. Sync monitoring is ideal for closely observing and tracking the end-to-end synchronization chain, including embedded boundary clocks, end-point slave clocks found in on path switching elements and end point base stations or small cells.
Some of the products offered include the TimeProvider series, which features IEEE 1588 PTP GMs that enable communications service providers to build an accurate, robust and reliable network timing infrastructure. The TimeProvider 5000 is optimized for high PTP client capacity and full redundancy from the core supporting both ITU-T G.8265.1 and ITU-T G.8275.1 profiles.
The TimeProvider 2700 Edge Grandmaster Clock and TimeProvider 2300 Edge Boundary Clock provide synchronization in the mobile backhaul network and small cell aggregation locations. These edge master clocks are optimized to help enable cost effective deployments, mitigate asymmetric timing errors and meet the stringent synchronization requirements of 4G/LTE networks.
The new indoor Integrated GNSS Master IGM-1100i provides synchronization for in-building, convenient and cost-effective deployments at the very outside edge of the network. Eliminating the need for external GPS antennas and deployed with Power-over-Ethernet, the IGM-1100i is a breakthrough technology for small cell synchronization.
Microsemi's TimeProvider 2700 PTP GM clock and TimeProvider 2300 edge master clock are both available now. For more information, visit http://www.microsemi.com/products/timing-synchronization-systems/time-frequency-distribution/network-appliances-servers/timeprovider/timeprovider-2700 and http://www.microsemi.com/products/timing-synchronization-systems/time-frequency-distribution/network-appliances-servers/timeprovider/timeprovider-2300, respectively, or contact Microsemi at email@example.com.
About Microsemi's Timing and Synchronization Systems Product Portfolio
As a global provider of advanced timing and synchronization solutions, Microsemi offers a complete portfolio of precise time and frequency products that span all levels of integration, from integrated circuits, to components for embedded applications, to timing and synchronization systems, to turnkey timescales for customers around the world. At the systems level, solutions offered by the company generate, distribute and apply precise time for the communications, aerospace, defense, IT infrastructure and metrology industries. Customers range from communications service providers and network equipment manufacturers to governments and their suppliers worldwide. Using the technology offered by Microsemi, customers are able to build more reliable networks and systems by using the company's advanced timing technologies, atomic clocks, services and solutions. These systems support today's precise timing standards, including GPS-based timing, IEEE 1588 (PTP), Network Time Protocol (NTP), Synchronous Ethernet and DOCSIS® timing. To learn more visit http://www.microsemi.com/products/timing-synchronization-systems/timing-synchronization-systems.
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, Calif., and has approximately 3,600 employees globally. Learn more at www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to its new high performance precise time and frequency product, the SyncSystem 4380A Master Timing Reference, for use in metrology, defense, communications, aerospace, and other applications where performance and reliability are vital, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/microsemi-quadruples-precision-time-protocol-client-capacity-to-provide-enhanced-synchronization-performance-to-lte-networks-300191939.html
SOURCE Microsemi Corporation