"These new single-port SimpliPHY GbE and FE PHYs further underscore our commitment to bring cost effective, differentiated Ethernet solutions to Microsemi's key focus markets, including industrial, IoT, enterprise and carrier/telecommunications," said Uday Mudoi, vice president, marketing, for Microsemi's Ethernet Networking Technology (ENT) group. "These new devices, combined with open-source licensed Linux Driver Software and comprehensive design collateral, enable quick time to market for our customers and ecosystem partners."
Market research firm IHS's 2015 report, "1G/10G/40G/100G Networking Ports—Biannual Worldwide and Regional Market Size and Forecasts," forecasts Gigabit Ethernet PHYs' total annual broadband and infrastructure networking Ethernet copper media port shipments to grow more than 35 percent, from 526 million in 2015 to more than 717 million by 2019. An increasing number of Gigabit Ethernet-enabled end points are connecting into this infrastructure as the technology plays a crucial role in driving connectivity across a wide variety of applications.
The new PHYs deliver innovative capabilities to differentiate original equipment manufacturer (OEM) end-products including:
- Lower power consumption, reduced EMC/EMI and extended product design life cycle with low voltage complementary metal oxide semiconductor (LVCMOS) media independent interface (MII) and management data input/output (MDIO) support at 1.5V, 1.8V, 2.5V, and 3.3V
- Ease of printed circuit board (PCB) design, in a 68-pin 8 mm x 8 mm QFN or a 48-pin 6 mm x 6 mm QFN package
- Enhanced IEEE 1588v2 Precision Time Protocol (PTP) accuracy from a system-level solution, a requirement for future 5G designs
Microsemi PHYs also uniquely offer the ability to run VeriPHY™, a comprehensive cable diagnostics, while the link is actively carrying traffic—allowing superior troubleshooting and monitoring capabilities compared to competitive solutions. Additionally, the new PHYs' configurable drive strength enables systems compliance with electromagnetic interference (EMI)/electromagnetic compatibility (EMC) certifications, such as FCC Class B and CE.
In addition to the notable cost savings for customers, Microsemi's new single-port SimpliPHY GbE and FE PHYs offer a Fast-Link Failure 2 (FLF2™) indicator, which identifies whether a link might go down in less than 10 microseconds for 1000Base-T (or < 100 microseconds for 100Base-TX), as well as support for forced 1000BASE-T mode support with auto-reconnect in the event the link should come down. In addition, the VSC8541XMV-03 features 1588v2 start-of-frame (SOF) support when used in reduced gigabit media-independent interface (RGMII) in 1000BASE-T mode, enabling enhanced 1588v2 PTP time stamp accuracy when used with an external FPGA or application-specific integrated circuit (ASIC) that performs Digital Dual Mixer Time Difference (DDMTD) along with 1588v2 PTP time-stamping, such as Microsemi's SmartFusion™2 system-on-chip (SoC) FPGAs, as well as the necessary DPLL devices and 1588v2 servo algorithm. For more information about Microsemi's IEEE 1588v2, visit http://www.microsemi.com/design-support/ieee-1588-technology.
Other key features include:
- Comprehensive support for either unmanaged or managed modes with 32 device addressability
- Adjustable drive strength on GMII/RGMII/MII/RMII MAC-to-PHY interfaces, with 1.5V ~ 3.3V
- Industrial temperature (I-Temp) offerings for both GbE and FE PHYs; C-Temp for GbE PHYS
- Configurable recovered clock for Synchronous Ethernet (SyncE) (VSC8541 and VSC8540)
- Low single event upset (SEU) failure-in-time (FIT) of < 80 (VSC8541XMV-03)
Microsemi's new single-port SimpliPHY Cu GbE and FE PHYs are available for purchase orders now. For more information, visit http://www.microsemi.com/products/ethernet-solutions/gigabit-ethernet-phys and http://www.microsemi.com/products/ethernet-solutions/ethernet-phys/fast-ethernet-phys/fast-ethernet-phys or email email@example.com.
About Microsemi's Industrial and Industrial IoT Solutions Portfolio
Microsemi is a provider of industrial and industrial Internet of Things (IoT) solutions, products and services for applications such as automation, smart energy, communications, transportation and surveillance, including secure, reliable and low power FPGAs, SoC FPGAs, industrial Ethernet switches and PHYs, PoE integrated circuits (ICs) and midspans, 1588 precision timing and synchronization devices, comprehensive drivers and interfaces ICs including sensor interface devices, power discretes such as Silicon Carbide (SiC) MOSFET and power modules and state-of-the-art audio processing solutions. For more information about Microsemi's complementary product portfolio for industrial applications, visit http://www.microsemi.com/applications/industrial.
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees globally. Learn more at www.microsemi.com.
Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.
"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including statements related to the availability of its new highly compact single-port SimpliPHY™ Gigabit Ethernet (GbE) and Fast Ethernet (FE) PHYs with supporting open-source Linux drivers, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.
Logo - http://photos.prnewswire.com/prnh/20110909/MM66070LOGO
To view the original version on PR Newswire, visit:http://www.prnewswire.com/news-releases/microsemi-unveils-new-ethernet-phys-for-industrial-and-iot-applications-300356436.html
SOURCE Microsemi Corporation