2014

New Module Triples EMC Testing Range to 18 GHz in Digital Receiver from Teseq Updated system includes fiber optic cable, rechargeable Li-Ion battery

EDISON, N.J., Dec. 16. 2011 /PRNewswire/ -- Teseq Inc., a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, now offers a high-performance digital EMC/EMI receiver module that extends the frequency range of the PMM 9010 receiver system from 6 GHz to 18 GHz.  Ideal for use in commercial test labs and by in-house manufacturers' labs, the upgraded PMM system can now be used for a wider range of EMC testing.

(Photo:  http://photos.prnewswire.com/prnh/20111216/PH24196 )

The innovative PMM 9180 offers high performance, convenience and cost savings by cutting turnaround times and eliminating the need for expensive coax cables and periodic calibration checks.  It provides better radiated emissions system sensitivity than other units on the market.

The uniquely designed, battery-powered PMM 9180 is the only fully-compliant EMI receiver module on the market directly connected to an antenna located inside the testing chamber and has the ability to transmit data outside the testing chamber via fiber optic cable, eliminating signal losses that can exceed 20 dB. 

The PMM 9180 is fully compliant with CISPR 16-1-1 and MIL-STD.  It features a plug-in Li-Ion rechargeable battery that lasts for a minimum of four hours.

The FCC requires that EMC emissions testing be performed at 10 times the highest clock frequency in a product.  By using the PMM 9180, FCC testing can be performed on products with clock speeds to 1.8 GHz as well as MIL 461 RE 102 testing, which has an upper frequency limit of 18 GHz.  The PMM 9180 can also be used for CE marking.

The PMM 9180 is fully compatible with the PMM Emissions Suite software.  This unique software offers full control of all auto and manual receiver functions, real-time display, editing of standard limits, creation of correction factors tables and warning messages for incorrect settings. 

In addition, the software includes one-click operation for selecting measuring mode: swept, spectrum analyzer or tuned.  All measurements taken by the receiver can be retrieved, saved, recalled and compared when using PMM's PC Emissions Suite software.

The PMM 9180 features a high speed optical interface, an operating temperature of -5 degrees C to 45 degrees C, a measurement accuracy of +/- 2.0 dB and a maximum input level of 137 dBuV without damage.

Weighing approximately 4.5 pounds, the PMM 9180 is highly portable and reliable.

Teseq is the exclusive North American distributor for PMM, a brand of Narda Safety Test Solutions srl, which manufactures the PMM 9180.

The PMM 9180 receiver module starts at $36,000.  Delivery is 12 weeks ARO.

Contact Teseq USA directly for pricing.  Or find out about renting Teseq products.

For more information, please visit http://www.teseq.com or contact MaryJane Salvador, Teseq Inc., 52 Mayfield Avenue, Edison, N.J. 08837. Tel: (732) 417-0501 ext. 239; Fax: (732) 417-0511; E-mail: maryjane.salvador@teseq.com.  Web: http://www.teseq.com.

For high res download and full text:
http://www.simongroup.com/PressRoom/press-release.php?Job=TES-A-2169

For more news releases: http://www.simongroup.com/PressRoom/teseq.php

 Subscribe to Teseq's RSS feed:  http://feeds.feedburner.com/Teseq

 Follow us on Twitter: TeseqInc:  http://twitter.com/TeseqInc

 Become a fan of Teseq Inc.:  https://www.facebook.com/Teseq

 

READER SERVICE INQUIRIES: Please forward all reader service inquiries to MaryJane Salvador, Teseq Inc., 52 Mayfield Avenue, Edison, N.J. 08837.

EDITOR'S NOTE: Teseq was formerly known as Schaffner Test Systems until a management buyout was finalized in November 2006. The company provides EMC instrumentation and systems for radiated and conducted interference in the automotive, consumer electronics, telecommunications, medical, aerospace and defense industries. It has approximately 130 employees and has been accredited to perform calibration services according to ISO 17025 at its Edison, N.J. laboratory. Teseq is the only pulsed immunity manufacturer in North America with an accredited calibration lab

 

Editorial Contact:

The Simon Group, Inc.
Joanna Puglisi-Barley or Beth Smith
Phone:            (215) 453-8700
E-mail:            publicrelations@simongroup.com

SOURCE Teseq Inc.



RELATED LINKS
http://www.teseq.com

More by this Source


Custom Packages

Browse our custom packages or build your own to meet your unique communications needs.

Start today.

 

PR Newswire Membership

Fill out a PR Newswire membership form or contact us at (888) 776-0942.

Learn about PR Newswire services

Request more information about PR Newswire products and services or call us at (888) 776-0942.