DENVER, Dec. 18, 2015 /PRNewswire/ -- Oil production from key shale formations in North Dakota and Texas remained relatively flat in November versus October, according to Platts Bentek, an analytics and forecasting unit of Platts, a leading global provider of energy, petrochemicals, metals and agriculture information.
Oil production from the Eagle Ford shale basin in Texas was relatively unchanged in November, decreasing about 1000 barrels per day (bbl/d), or less than 1%, versus the previous month, the latest analysis showed. Similarly, crude oil production in the North Dakota section of the Bakken* shale formation of the Williston Basin dipped by less than 1% month-over-month in November, marking the fifth consecutive month of marginal decline that began in the summer.
The average oil production from the South Texas, Eagle Ford basin in November was 1.5 million barrels per day. On a year-over-year basis, that is up nearly 40,000 incremental barrels per day, or about 3%, from November 2014, according to Sami Yahya, Bentek energy analyst. The average crude oil production from the North Dakota section of the Bakken in November was 1.1 million b/d, about 3% lower than year ago levels.
"Platts Bentek recently completed an analysis of the impact of reduced drilled activity in the Eagle Ford on crude production, and the results were very interesting," said Yahya. "Currently, Platts Bentek forecasts a slight production growth of 8% by 2020 in the Eagle Ford, with output reaching 1.6 million barrels per day (MMb/d). If drilling activity in this basin is cut by 25%, then crude production would decline by 12% by the end of the decade. If the rate is cut by 50%, crude production would decline by 33%."
Based on this analysis, Yahya said it is clear that even if producers half their drilling activities in the Eagle Ford, production would not necessarily plummet. Reason: Efficiency gains attained by producers this year, which include maximizing initial production rates and improving ultimate recovery from each new well.
A different kind of analysis was done for the Bakken shale formation of the Willison Basin, which revolved around answering the question of how much production would grow if a certain percentage of current wells in backlog inventory are completed.
"Assuming current drilling rates, crude production in the Bakken can grow by as much as 200 thousand barrels per day and reach 1.4 MMb/d by mid-2017 if producers completed 5% of the backlogged wells starting in June of 2016," Yahya said.
There is a large number of drilled but uncompleted wells in the Bakken shale that have been building up over the past few years. The Platts Bentek analysis shows the big risk to the outlook lies with the strength of prices.
"If prices remain sub-$40/barrel and producers are unable to further bring down completion costs, then they might defer completions until the pricing market makes a comeback," said Yahya.
Bentek analysis shows that from November 2014 to November 2015, total U.S. crude oil production has increased by about 265,000 b/d.
In terms of the U.S. physical spot markets, Luciano Battistini, Platts managing editor of Americas crude, said, "Prices continued to tumble in November, falling upwards of 5% month-on-month for both Bakken and Eagle Ford. Eagle Ford prices fell below $45/b in November, while Bakken shale oil could barely fetch around $40/b close to the wellhead."
The Platts Eagle Ford Marker, a daily price assessment launched in October 2012 and reflecting the value of oil out of the Eagle Ford Shale formation in South Texas, has dropped 8% between January and November, with an average price of $53.22/b during that time. That is down 43% from year-ago levels. The marker has ranged between $40.68/b and $66.23/b since the beginning of this year.
The price of oil out of the Bakken formation at Williston, North Dakota, rose 2% between January and November, with an average price of $46.36/b, according to the Platts Bakken assessment. But when compared to the same month a year ago, the Platts Bakken price is down 39%. The wellhead assessment has ranged between $33.35/b and $59.32/b since the beginning of January.
The Platts Bakken, introduced April 22, 2014, is a daily assessment of price for oil closest to the wellhead prior to determination of transportation by rail or pipe. The assessment reflects a sulfur content of 0.2% or less and an American Petroleum Institute (API)** gravity of 42 or less, similar to the nature of North Dakota Light Sweet crude. The Platts Eagle Ford Marker reflects the value of a median 47-API Eagle Ford crude barrel, based on the crude's product yields and Platts product price assessments, adjusted for U.S. Gulf Coast logistics.
Platts introduced the world's first independent daily price reference valuing crude oil produced from a shale formation in May 2010 when it began assessing Bakken Blend shale oil injected into pipelines at Clearbrook, Minnesota, and Guernsey, Wyoming.
For more information on Platts price assessments methodology visit these links: Details of Platts Bakken and Platts Eagle Ford Marker. Platts Bentek shale oil production figures are derived from proprietary data models using publicly available data. For more information on data models, reports or Platts Bentek methodology, please contact info@platts bentek.com.
Platts will publish monthly updates via press release on Bakken and Eagle Ford shale oil production and price data.
* The Bakken formation spans North and South Dakota, Montana, Saskatchewan, Manitoba and Alberta.
** API gravity is a measure of how heavy or light a grade of crude oil is compared to water.
About Platts: Founded in 1909, Platts is a leading global provider of energy, petrochemicals, metals and agriculture information and a premier source of benchmark prices for the physical and futures markets. Platts' news, pricing, analytics, commentary and conferences help customers make better-informed trading and business decisions and help the markets operate with greater transparency and efficiency. Customers in more than 150 countries benefit from Platts' coverage of the biofuels, carbon emissions, coal, electricity, oil, natural gas, metals, nuclear power, petrochemical, shipping and sugar markets. A division of McGraw Hill Financial, Platts is based in London with more than 1000 employees in more than 15 offices worldwide. Additional information is available at http://www.platts.com.
About McGraw Hill Financial: McGraw Hill Financial (NYSE: MHFI) is a leading financial intelligence company providing the global capital and commodity markets with independent benchmarks, credit ratings, portfolio and enterprise risk solutions, and analytics. The Company's iconic brands include Standard & Poor's Ratings Services, S&P Capital IQ and SNL, S&P Dow Jones Indices, Platts, CRISIL and J.D. Power. The Company has approximately 20,000 employees in 31 countries. Additional information is available at www.mhfi.com.