SMIC Offers Differentiated 0.13um Low-Leakage Embedded Flash Manufacturing Process Provides Lower Costs, Better Performance and Greater Endurance

SHANGHAI, Oct. 15, 2013 /PRNewswire/ -- Semiconductor Manufacturing International Corporation ("SMIC"; NYSE: SMI; SEHK: 981), China's largest and most advanced semiconductor foundry, announced today its 0.13um Low-Leakage (LL) embedded Flash (eFlash) process has entered volume production stage.  SMIC's 0.13um LL eFlash technology is a continuation of SMIC's Non-Volatile Memory (NVM) offering to provide customers a differentiated solution to address performance, power consumption and cost.

SMIC's 0.13um LL eFlash technology provides customers with the following advantages:

  • High endurance: Up to 300k read-write cycles, three times higher than industry standards;
  • Cost-effective solution: innovative process with fewer manufacturing steps;
  • Low-Leakage process for extremely low power consumption applications;
  • Better reliability and performance: Copper Back-End of Line (Cu-BEoL) process suitable for higher current density applications.

The technology incorporates a comprehensive set of Intellectual Properties (IP), such as PLL, ADC, LDO, USB, and more. Coupled with its low-power consumption, high performance, and high reliability, the 0.13um LL eFlash process is available for production for a wide range of low-leakage MCU applications which includes mobile handsets and smart cards. In addition, SMIC's 0.13um LL e-Flash offering is targeted to include automotive electronics, RF applications, and the Internet of Things (IoT) market segments.

"We are encouraged by our customers' rapid acceptance of our differentiated 0.13um LL eFlash offering," said Mike Rekuc, Executive Vice President of SMIC Worldwide Sales and Marketing. "In particular, we are delighted to see existing designs in volume production such as MCUs for Touch Controller ICs (TCIC). According to IHS market research, the worldwide demand for TCIC for capacitive touch panels will reach about 2.7 billion units by Y2017 which is a 21% CAGR from Y2012."

About SMIC

Semiconductor Manufacturing International Corporation ("SMIC"; NYSE: SMI; SEHK: 981) is one of the leading semiconductor foundries in the world and the largest and most advanced foundry in mainland China, providing integrated circuit (IC) foundry and technology services at 0.35-micron to 40-nanometer. Headquartered in Shanghai, China, SMIC has a 300mm wafer fabrication facility (fab) and a 200mm mega-fab in Shanghai, a 300mm mega-fab in Beijing, a 200mm fab in Tianjin, and a 200mm fab project under development in Shenzhen. SMIC also has customer service and marketing offices in the U.S., Europe, Japan, and Taiwan, and a representative office in Hong Kong.
For more information, please visit www.smics.com.

Safe Harbor Statements

(Under the Private Securities Litigation Reform Act of 1995)

This press release contains, in addition to historical information, "forward-looking statements" within the meaning of the "safe harbor" provisions of the U.S. Private Securities Litigation Reform Act of 1995.  These forward-looking statements are based on SMIC's current assumptions, expectations and projections about future events.  SMIC uses words like "believe," "anticipate," "intend," "estimate," "expect," "project" and similar expressions to identify forward-looking statements, although not all forward-looking statements contain these words.  These forward-looking statements involve significant risks, both known and unknown, uncertainties and other factors that may cause SMIC's actual performance, financial condition or results of operations to be materially different from those suggested by the forward-looking statements, including among others risks associated with the current global economic slowdown, orders or judgments from pending litigation and financial stability in end markets.

Investors should consider the information contained in SMIC's filings with the U.S. Securities and Exchange Commission (SEC), including its Annual Report on Form 20-F filed with the SEC on April 15, 2013, especially in the "Risk Factors Related to Our Financial Condition and Business" and "Operating and Financial Review and Prospects" sections, and such other documents that SMIC may file with the SEC or the Hong Kong Stock Exchange from time to time, including current reports on Form 6-K.  Other unknown or unpredictable factors also could have material adverse effects on SMIC's future results, performance or achievements.  In light of these risks, uncertainties, assumptions and factors, the forward-looking events discussed in this press release may not occur.  You are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date stated, or if no date is stated, as of the date of this press release.  Except as may be required by law, SMIC undertakes no obligation and does not intend to update any forward-looking statement, whether as a result of new information, future events or otherwise.

SMIC Contact Information:

English Media
Anny Liao
Tel: +86-21-3861-0000 x16036
Email: Anny_Liao@smics.com

Chinese Media
Angela Miao
Tel: +86-21-3861-0000 x10088
Email: Angela_Miao@smics.com

SOURCE Semiconductor Manufacturing International Corporation



RELATED LINKS
http://www.smics.com

More by this Source


Custom Packages

Browse our custom packages or build your own to meet your unique communications needs.

Start today.

 

PR Newswire Membership

Fill out a PR Newswire membership form or contact us at (888) 776-0942.

Learn about PR Newswire services

Request more information about PR Newswire products and services or call us at (888) 776-0942.